Kawat EDM mesin

AGIE Challenge 3

Tahun pembuatan: 2008, Kondisi: diremajakan ulang (bekas), AGIECUT Challenge V3, year of manufacture 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel: +/- 70 mm Bodpfx Asm Amf Dsf Dsdk Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400 / 800 kg Achievable surface finish: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire EDM with automatic wire threading With automatically lowering work tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4,500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Including user training at Techma on your overhauled machine Optional: Transport, commissioning, training, cooler

Tahun pembuatan: 2024, Kondisi: baru, Working Chamber Bsdpfx Ajh Hxubsf Djdk 1100 x 660 x 816 mm (W x D x H) Blasting Chamber Dust-proof negative pressure cabin in sturdy sheet steel construction Work Gloves Special rubber, wear-resistant, inner lining cotton, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closure, double-walled, foam-filled for noise reduction, lockable, with electric safety interlock Abrasive Recovery Via coordinated MHG recovery system Operation ON/OFF switches for extraction and lighting, pressure regulator, pressure gauge, and foot switch Viewing Windows

Tahun pembuatan: 2006, Kondisi: diremajakan ulang (bekas), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading With automatically retractable tank (accessible from two sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled and thoroughly tested by us after order confirmation. Subsequently, we will commission the machine at your site. You will receive a 6-month warranty on the machine. Bjdpfx Aegfm Rrof Dsdk We are also pleased to offer the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Tahun pembuatan: 1974, Kondisi: bekas, Druck: 340 t Hub: 200 mm Bdsdpe Du Uwefx Af Dek Tischgröße unten: 100 x 800 mm Abstand zwischen Ober- und Untertisch: - geöffnet: 510 mm (Lichte Weite) - geschlossen: 310 mm Neue Hydraulik- und Elektriksysteme

Kondisi: bekas, Tahun pembuatan: 2004, Technical specifications: Travel (X/Y/Z): 650 / 500 / 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 6,500 rpm Max. table load: 400 kg Number of tool magazine positions: 20 Power supply: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Motor spindle 12,000 rpm - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimum quantity lubrication system - approx. 25 tool holders Bjdpjwglapofx Af Dedk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Wir können es nicht in der Produktion einsetzen, daher der Verkauf. Bdsdjrq A Sxepfx Af Dsk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 250 mm, panjang umpan sumbu Z: 160 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 480 mm, kecepatan spindel (maks.): 9.000 rpm, kecepatan pemakanan sumbu X: 2 m/menit, laju pemakanan gandar Y: 2 m/menit, laju pemakanan sumbu Z: 1 m/menit, kecepatan spindel (min.): 100 rpm, gores kuas bulu: 160 mm, lebar meja: 320 mm, panjang meja: 880 mm, X-500, Y-250, Z- quill travel 160 mm, W- machine head traverse 480 mm, table 880 x 320 mm, max. 320 kg, spindle taper SF 32, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124. Extensive accessories included. Bdodeq R Rb Hopfx Af Dek

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Bedpfx Aetyyn Hof Dsdk Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Bedpfsn Smtqox Af Dodk Equipped with: - 3 sheet support arms - Rear access safety guard - Foot pedal Motor power: 11 kW Machine dimensions (LxWxH): 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, jam operasional: 985 h, jarak pergerakan sumbu X: 905 mm, jarak lintasan sumbu Y: 705 mm, jarak gerak sumbu Z: 455 mm, berat benda kerja (maks.): 3.000 kg, EDM314MF30 - SLM (Second-Life Machine) Completely Overhauled Travel Range X x Y x Z: 900 x 705 x 455 mm Machine Table: 1150 x 850 mm Tank Size: 1200 x 900 mm Distance Table/Chuck: 260/710 mm Electrode Weight: 50 / 500 kg Max. Workpiece Weight: 3000 kg Overall Machine Dimensions: 2210 x 3450 x 3250 mm Power Supply: 400V/3-phase/50/60Hz Tank Height: 750 mm Bodpohfaizjfx Af Dsdk Equipment: MF30 Operating Interface Movable Operating Panel Touch Screen Display Lifting Speed: 15,000 mm/min (Highjump) EDM Generator: 60A Integrated Chiller Unit Cartridge Filter System 8-Position Tool Changer C-Axis with Direct Measurement, Resolution 0.0001 Degree C-Axis for Positioning, Rotation, and EDM Operation C-Axis: 100 RPM Automatic Tank Tracking Filling, Filtering and Flushing Pump Transport Commissioning Training 12 Months Warranty