Hot-Chamber Diecasting mesin - Vertic.

FRECH DAW 50

Kondisi: bekas, Tahun pembuatan: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Distance between tie bars: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Nkodpfxetuxmys Abvsw Injection plunger diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Demolding stroke: 150 mm Used machine DAW 50 as a basis for complete refurbishment, without control cabinet, furnace, or furnace housing. A general overhaul can be carried out at the manufacturer’s overhaul facility. The scope of the overhaul can be defined as required.

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: MS 2504 Year of manufacture: 2022 Nkjdpfx Aod R Er Debvew Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (L/W/H): 3200x2300x1350 mm Weight: 3,780 kg Standard equipment: - EZM9910 control unit - Backgauge range of 750 mm, programmable via control unit - Plastic inserts for hold-downs - 1 side stop and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Ball screw spindle - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Further machines are available for demonstration at our facility in Staufenberg. Further information available on request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet Nedpogpxc Sjfx Abvjkw

Kondisi: baru, Ostas 3-Roller Plate Bending Machine ORM 1070 x 110 Technical Specifications: Special features included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1070 mm Sheet thickness max.: 5.0 mm Sheet thickness for pre-bending: 4.0 mm Roller length: 1070 mm Roller diameter: 110 mm Weight: 1000 kg Dimensions (L x W x H): 2250 x 800 x 1100 mm Motor: 2.2 kW Equipment: - Electrically driven top and bottom rollers - Swing-out top roller Nkedpjgkwhasfx Abvow - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operator panel - Safety wire - CE mark

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW Nkjdslgvkispfx Abvow - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: baru, 88-degree large goose foot punch H120mm for Amada/Promecam/Durma/Baykal/Ermaksan/MVD/Denner/SBD Nksdpfx Abeiiq H Dsvow

Kondisi: bekas, Tahun pembuatan: 2003, gaya penekanan: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year: 2003 Technical Data Manufacturer: HACO Model: ERMS 60-260 Nksdjwkttropfx Abvew Year of manufacture: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): appr. L 7.0 x W 2.0 x H 3.70 m Weight: appr. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain at the front • Centrally adjustable crowning system • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information without guarantee. A demonstration is possible at any time in the exhibition hall.

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. Njdpfx Aenh R Eksbvskw TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Gaya penutup: 220 kN, tinggi cetakan minimum: 200 mm, langkah pembukaan maksimum: 200 mm, jarak maksimum antar pelat: 400 mm, langkah pendorong: 80 mm, dimensi mesin (P/L/T): sekitar 2600 mm/800 mm/1600 mm, berat: sekitar 760 kg. Inspeksi di lokasi dimungkinkan. Nsdpfow R Dg Uex Abvjkw

Kondisi: baru, Schachtofen_VEI Nkedpfxsg R Snho Abvjw