Mesin pengikis kawat

Agiecut Challenge 3

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control system: Heidenhain Mill Plus V600 Machine weight: approx. 7000 kg 24,000 rpm 16x HSK63A tool changer Hfodowgi Drjpfx Aaneg 40 bar internal coolant supply 250 liter coolant tank Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, produsen pengendali: SIEMENS, model controller: 840 D, jumlah sumbu: 4, en Hodpfx Aasx D I A Sjnsfg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.435 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 620, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 13.000 W, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DMG MORI CMX 50 U + PH150 was manufactured in 2019. It features an X-axis travel of 500 mm, a Y-axis travel of 450 mm, and a Z-axis travel of 400 mm. The machine is equipped with a powerful spindle delivering 12,000 rpm and a tool magazine for 60 tools. It comes with a PH150 automation system. If you are looking for high-quality machining capabilities, consider the vertical machining center DMG MORI CMX 50 U + PH150 that we have for sale. Contact us for further details. • B-axis: -5/+110° • C-axis: 360° • Spindle torque (100%/40%): 57/83 Nm • Rapid traverse: 30 m/min • Tool magazine: 60 tools with double gripper • Direct measurement on X/Y/Z axes • Renishaw tool and workpiece probe • Tank capacity: 250 liters • 3D-Quickset • Electronic handwheel Additional equipment: • Chip conveyor • DMG MORI PH 150 pallet system with 6 pallets (398 x 398 mm, load capacity 150 kg) • Erowa MTS clamping system • 2 identical machines available! Hodpfeyw Ivzex Aanofg Technical Specification Taper Size SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 16.661 h, kecepatan spindel (maks.): 12.000 rpm, jarak pergerakan sumbu X: 480 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 845 mm, Diameter batang (maks.): 67 mm, berat keseluruhan: 10.000 kg, produsen pengendali: SIEMENS, model controller: 840 D, jumlah slot dalam magazin alat: 48, sudut putar sumbu B (min.): 110 °, sudut putar sumbu B (maks.): 110 °, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens SL Operate 3G control unit, a counter-spindle with C-axis, and double chucking at both the main and counter-spindles. Equipped with a HSK 63A chain magazine holding 48 tools and a coolant system with 8/20 bar pressure, it is ideally suited for complex turn-mill operations. Take advantage of this opportunity to purchase the DMG MORI Beta 800 TC turning-milling center. Contact us for more information regarding this machine. • CNC Control: Siemens SL Operate 3G, 1 channel, without CELOS • Configuration: Counter-spindle ISM 52 with C-axis (replaces tailstock) • Tool Magazine: Chain-type for 48 tools, HSK 63A • Coolant System: 8/20 bar, 600 l tank • Chuck rinsing for main and counter-spindle • Coolant supply to the counter-spindle Additional Equipment: • Workpiece holding: - Main spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck - Counter-spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Chip conveyor: hinged type • Provision for mist extractor • Bar machining package Ø 67 mm • Tool measuring probe: Blum B-H7210 • Approx. 40 toolholders (to follow) Technical Specifications Hedpfx Aaex H U Ezonofg Taper Size: HSK 63 Through-spindle Coolant: Yes Counter Spindle: Yes Driven Tools: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 56.089 h, KRnlc2hkbDQ3 Hfedpfxsw Dfhuj Aanog

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: MAZATROL, model controller: MATRIX, lebar meja: 500 mm, panjang meja: 500 mm, beban meja: 500 kg, berat keseluruhan: 25.000 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 26.000 W, Mazak Variaxis 630-5X T 5-sumbu ini diproduksi pada tahun 2009 dan menawarkan fitur canggih untuk tugas pemesinan yang kompleks. Pusat pemesinan vertikal ini sangat ideal untuk mekanik presisi dan menjamin kinerja yang andal. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal Mazak Variaxis 630-5X T ini. Hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Jumlah alat (magazin ATC): 80 Hjdpsyallksfx Aanjfg • Tekanan tinggi melalui spindle: 20 bar Informasi tambahan Mesin masih tersambung listrik. Spesifikasi teknis Taper size: ISO 40

Tahun pembuatan: 2007, Kondisi: baik (bekas), nomor mesin/kendaraan: 1380-1207, mit Siemens Sinumerik Bedienpanel mit Späneförderer Bedienpult Elektroschrank Spindeldurchlass 60 mm Hsdpsm Nb Rijfx Aanjfg max. Werkstücklänge 340 mm

Kondisi: bekas, Tahun pembuatan: 1978, Technical Data: Maximum grinding diameter: 100 mm Regulating wheel width: 200 mm Maximum grinding wheel width: 200 mm Grinding diameter: 100 mm Grinding length: 250 mm Plunge depth: mm Working area: mm Speed: m/min Bar lengths: mm Total power requirement: 25 kW Machine weight: approx. 4,500 kg Space requirement: approx. m K O E N I G & B A U E R Centreless Cylindrical Grinding Machine for Plunge Grinding Model: M 150 - 5 Year: approx. 1978 #73.918 Grinding range diameter normal/maximum: 2 – 50 / 100 mm Max. workpiece length for through-feed grinding: approx. 250 mm Max. workpiece length for plunge grinding: approx. 200 mm Grinding wheel dimensions: diameter x width max.: 600 x 200 mm Regulating wheel dimensions: diameter x width max.: 300 x 200 mm Max. grinding wheel speed: 1,450 rpm (approx. 35 m/sec) Regulating wheel speed, steplessly adjustable: 10 – 140 / 230 rpm Regulating wheel tilt: +3 / -5 degrees Stroke of the two hydraulic dressing slides: approx. 200 mm Grinding wheel drive: approx. 18 kW Total drive: approx. 25 kW – 400 V – 50 Hz Weight: approx. 4,500 kg Accessories / Special Features: • This is a centreless grinding machine specially equipped for plunge grinding of cylindrical workpieces, with a manual loading device for raw parts and a pneumatically controlled unloading device for finished parts. Workpiece removal is manual. • Currently equipped with a workpiece support with rail according to workpiece diameter. • The regulating wheel slide is controlled by a hydraulic infeed device with automatic sequence via cam control, and also features a fine adjustment via stepper motor. • The grinding slide is stationary, housing only the hydraulic dressing device for the grinding wheel. • The lower regulating wheel slide can be pivoted up to 3° and carries the workpiece support, for easy correction of roundness errors. The upper regulating wheel support can also be tilted by plus/minus 5°. Hfjdpfx Aet Hwtroanog • Hydraulic dressing device mounted above the regulating wheel, tiltable hydraulic dressing device for shoulder profile dressing, template and stepper motor feed for the dressing diamond for compensation, equipped with a high-pressure coolant nozzle for wheel flushing and diamond cooling. • The regulating wheel drive is continuously adjustable; dressing speed: 315 rpm, speed indicator. • The control panel accommodates all functions such as number of dressing cycles, number of workpieces, adjustable spark-out time, manual/automatic operation, etc. • Various grinding wheel flanges, crane tackle for wheel change, separate hydraulic unit and switch cabinet, etc. • No coolant system is currently installed. Condition: Good – demonstration possible under power, robust construction – ideal for grinding awkward workpieces...

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, berat benda kerja (maks.): 4.000 kg, jumlah slot dalam magazin alat: 120, produsen pengendali: Heidenhain, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 6.000 mm, berat keseluruhan: 12.000 kg, panjang meja: 630 mm, lebar meja: 500 mm, model controller: iTNC530, daya nominal (semu): 61 kVA, pergerakan cepat sumbu Z: 50 m/menit, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 4.000 kg, jam operasional spindle: 19.500 h, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned machining, geometrically within new machine tolerances. The machine can be measured/inspected on site upon request. Machine Data: Machine designation: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: • Direct path measurement in X/Y/Z (glass scales) • Chip conveyor • High-pressure coolant system, 40 bar • Extraction unit Hjdpfx Aaorxrklenefg • NC rotary table • Tool magazine with 120 stations • Heidenhain touch probe • Rotating viewing window • High-pressure coolant (IKZ) 40 bar • Signal lamp • Chip flushing • Operating mode 4 Technical Data: Number of axes: 5-axis CNC control: Heidenhain iTNC530 NC rotary table clamping surface: 500mm x 630mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travel paths and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rate and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor Spindle: Max. speed: 18,000 rpm Interface: HSK A63 Tool Changer: Automatic tool changer: Yes Number of magazine stations: 120 Pallet Changer: 5 pallets

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 40 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 710 mm, panjang pembubutan: 800 mm, diameter pembubutan: 850 mm, kecepatan spindel (maks.): 1.760 rpm, kecepatan spindel (min.): 20 rpm, jarak pergerakan sumbu X: 465 mm, jarak gerak sumbu Z: 800 mm, daya motor spindle: 45 W, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, tinggi total: 3.845 mm, panjang total: 3.450 mm, lebar total: 2.000 mm, torsi: 2.577 Nm, berat keseluruhan: 9.500 kg, diameter luar chuck: 610 mm, hidung spindel: A2-15, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, HYUNDAI WIA LV8500R – Unused Since Commissioning! The machine was newly delivered and installed in October 2024. After installation, a geometry measuring cut was performed. The workpiece used for this purpose is still on the – to this day, unused – machine! Machine Equipment: HYUNDAI WIA LV8500R – FANUC 0iPLUS with 15" touchscreen and FANUC SmartGuide i operating interface including FANUC ManualGuide i Tool breakage monitoring on all machine axes Automatic work area door for automation capability Hinged belt chip conveyor Reinforced drive power with 2-stage gearbox (45/37 kW – 2,577 Nm) 24-inch (610mm) 3-jaw power chuck with chuck jaws Automatic tool measurement RENISHAW BMT-75 tool turret 12 tool holders for stationary tools Hsdpfx Aaoyw Sr Tenofg LPS sensor for automatic clamping range adjustment 20 bar coolant pressure Coolant-powered spray gun for the work area Compressed air gun for part cleaning Bed flushing to prevent chip nests Air conditioning for the electrical cabinet