Granulator Untai - Granulator

AGRIFON-SHJ SG-150

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), Two Vecoplan drag chain conveyors are available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, maximum incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, maximum incline: 70°, section length: 22 m. Documentation available. An on-site inspection is possible. Kljdpfx Afot Iw Ryeisr

Tahun pembuatan: 2003, Kondisi: diremaj di bengkel (bekas), Stock No. 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput: up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and knife head, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer, 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200-liter water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Kedpfx Aoiyyf Iofielr Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available ex stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruder.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Approx. 4.5 m long infeed and centering table Driven by chain from the feed motor Centers the roundwood precisely to the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters Klsdpfx Aou Hmacofijr 30 kW main motor 11 kW feed unit Non-driven outfeed table Machine workshop-inspected Machine cleaned and newly painted

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Granulator eksentrik EGR digunakan dalam produksi plastik yang sensitif terhadap suhu dan geseran. Mesin ini dirancang khusus untuk granulasi PVC lunak, PVC keras, formula HFFR, atau compound berbasis elastomer untuk kabel tegangan rendah, sedang, dan tinggi. Selain itu, mesin juga dapat digunakan sebagai ekstruder sekrup tunggal konvensional untuk berbagai tujuan pemrosesan. • Diameter sekrup: 200 mm • dengan zona penguapan Kljdpfx Aew Iu T Tsfior • Daya penggerak: 72,5 kW

Kondisi: baru, berat kosong: 104 kg, berat muatan maksimum: 646 kg, berat keseluruhan: 750 kg, konfigurasi gandar: 1 as, panjang ruang muatan: 1.526 mm, lebar ruang muat: 1.116 mm, tinggi ruang muatan: 777 mm, volume ruang muat: 1,8 m³, ukuran ban: 13, jarak roda: 155 mm, Tahun pembuatan: 2023, Perlengkapan: kopling trailer,

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Draw depth: 700 mm If you require further details or a quotation, please feel free to contact us. Ksdpfowf Ea Tjx Afielr

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: 2021102613, Aluminum angle conveyor belt with substructure Conveyor belt length: 2000mm flat + 2200mm inclined Incline angle at bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matte Belt width: 500mm 21 pcs. T30 cleats welded – pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger splice 40mm wave edge on both sides, high-frequency welded * Edge-free zone on both sides for belt tracking on the incline Continuous support plate Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional frequency inverter control Connection 220/400V, 50Hz, protection class IP54 Kjdpfxeh Eld Ej Afiolr

Kondisi: sangat baik (bekas), The plant essentially consists of: - 2 feed units (walking floor bunkers) - 2 silos, each with 55 cbm capacity, equipped with discharge screws Kledjlxzl Eepfx Afior - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-connected twin-shaft extruders for the disintegration of woody biomass - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm • Heating: electric, connected load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones • Housing temperature measuring points: 6 • Material temperature measuring point: 1 • Material pressure measuring point: 1 Barrel configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Several closed barrels with ports for either liquid injection or measuring points • Venting barrel General features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive unit and process section mounted on a robust base frame Applications: • Plastic compounding • Masterbatch production • Additive and filler incorporation • Laboratory and pilot plant applications • Formulation and product development Kodpfx Afsycuuyeiolr Condition & Operating Hours: According to the hour meter, the machine has operated for less than a year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: On request, we offer design and installation of suitable tooling, e.g. strand dies, as well as the integration of additional peripherals such as screen changers, pelletizing systems, dosing technology, or other customer-specific components. The machine can therefore be individually configured and delivered ready for operation according to customer requirements.

Kondisi: bekas, Tahun pembuatan: 2014, Robot industri Produsen: Kuka Tipe: KR210 R3100 ultra dengan sumbu linier 4,5 m Tahun pembuatan: 2014 Jangkauan: 3.196 mm Berat: 1.154 kg Kapasitas angkut: 210 kg Kontrol Kuka KRC4 Tahun pembuatan: 2014 Berat: 163 kg Perangkat lunak KSS 8.5.4 Kuka TouchPad KCP4 Kabel penghubung Kuka Klodpexuwlwsfx Afior Sumbu linier Kuka Tipe: KL1500-3 T Tahun pembuatan: 2013 Panjang sekitar 4,5 m Jarak tempuh sekitar 3,5 m Duct kabel KRC4 Berat: 2.200 kg