Kepala mati yang membuka sendiri

Akon Rubometic Typ D

Kondisi: baru, High-performance thread tapping machine with leadscrew setup. Safety device against tool breakage. Programs for single-cycle and continuous operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single-cycle mode. Simple leadscrew change via quick-release coupling. Standard drilling capacity: 15 mm Thread cutting capacity: M3 - M10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Distance spindle/table: 185 to 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Mains connection: 400 V/50 Hz Nkodpsfrlndjfx Ahwju BT 18 GL M00033 4 spindle speeds: 320 rpm / 560 rpm / 1,000 rpm / 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column 200 mm longer: 14154

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator Nksdpfsd Iin Hjx Ahwou NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: baru, Sheet thickness 1.2 mm Nsdpfx Ahofv H Edewoku Roll diameter 62 mm Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Machine features: - Emergency stop switch - Foot switch - 7 sets of rollers

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter 6 - 28 mm Wall thickness 2 mm Bending radius min. 2 x D Control system IPU 20 Nsdovtgn Nspfx Ahwsku Bending radius max. 5.0 x D mm Max. bending angle 190° Mandrel length 3000 mm Operating pressure 180 bar Hydraulic motor 4 kW Machine weight approx. 900 kg Space requirement approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 preset bending angles and display in the control panel for angle specification, angle detection and angle measurement via absolute value rotary encoder, automatic tool table reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, feed forward/back, mandrel forward/back, bend forward/back, lock forward/back, mandrel lubrication, rotation device forward/back, table reset, length stop forward, emergency stop. The machine comes from prototype production and was only lightly used until 2000. Afterwards, the machines from this department were sold. However, the purchaser did not use the tube bending machine, so it has only been stored since then and has not been in operation (original paintwork). Machine offered at a special low price! This is a used machine; therefore, sale is made excluding any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 360 mm, ketinggian potong (maks.): 100 mm, Rentang pemotongan baja bulat pada 90°: 100 mm, panjang bagian (min.): 300 mm, Fully automatic carbide straight-cut circular saw KMR 100 AP Completely refurbished to as-new condition – available from stock WORKING RANGE Round material: 20 – 100 mm Square material: 20 – 80 mm DRIVE POWER Saw motor with frequency control: 11.0 kW CUTTING SPEEDS 20 – 150 m/min Includes feed magazine for 6 m bars and sorting for cut-offs/remnants and finished parts Suitable for cut lengths up to 300 mm Cutting time for Ø 100 mm solid material (1.0037): approx. 7 seconds!! Your advantage: - Machine refurbished directly by the manufacturer incl. 6-month parts warranty Nkjdpfx Ahsh Uqpvswju - All machines are completely dismantled and overhauled - Only original KALTENBACH spare parts are used

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 10-166, OFFER 13467 Technical specifications: Nkjdpfx Ashrm Iuehwou - Max. material thickness at 40 kg/mm² tensile strength: approx. 3 mm - Roller shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirements: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Tahun pembuatan: 1990, Kondisi: baik (bekas), 20191 Year of manufacture: approx. 1990, overhauled in 2002 Technical Data: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic adjustment Nodpfjhrdmbox Ahwsku - Drive: 400 V / 11 kW - Space requirement: approx. W 1750 x H 2200 x D 2300 mm - Weight: approx. 1600 kg - with bending angle adjustment - Hydraulic clamping - Bending tools

Kondisi: bekas, Tahun pembuatan: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Nkedpfxst Hmk Ts Ahwsu Number of feed rollers: 2 Weight of straightening machine: 2 t Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Weight of decoiler: 1.3 t Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Kondisi: bekas, Tahun pembuatan: 1985, Sheet width 2550 mm Nksdpfx Ahjv Uq Snjweu Sheet thickness 4 mm Backgauge 1000 mm Cutting angle 1.5° Hold-downs 14 pcs Total power requirement 6.5 kW Weight 3400 kg Space requirement approx. 3000 x 1500 x 2000 mm Equipment: - Electric backgauge 1000 mm - Electric cutting angle adjustment - 1x side gauge 1250 mm - 3x front support arms - Front finger guard - Foot switch

Kondisi: bekas, Tahun pembuatan: 2001, ketebalan pelat baja (maks.): 6 mm, penahan belakang: 500 mm, panjang pemotongan (maks.): 1.000 mm, Hydraulic Guillotine Shear Make: RABBA Model: HS 6/1000 Nkodev I T N Nepfx Ahwou Year: 2001 Technical Data Manufacturer: RABBA Model: HS 6/1000 Year of manufacture: 2001 Working length: 1000 mm Sheet thickness: 6 mm Dimensions (L x W x H): 1.50 x 1.70 x 1.60 m Weight: 1.6 t Equipment • Manual backgauge 500 mm • Angle stop All information without guarantee. A demonstration is possible at any time in our showroom.