Unit ekstraksi bergerak

AL-KO Power Unit 120 / 400 V

Kondisi: bekas, Tahun pembuatan: 2017, 1 Hfodpfxsyudids Ahnjh

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Mesin cuci kaca Bavelloni 2 pasang sikat Hodpew Tripefx Ahnsfh dua sirkuit air berfungsi

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Hfedpfx Asfxpbmjhnoh

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, wemhoehner_basic_1000_plus_en Hfjdpfx Ahexbcudonsh

Tahun pembuatan: 2026, Kondisi: baru, Fully automatic horizontal wrapping machine SPINNER 1800s Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Operating side: right-hand (in direction of product flow) General Technical Data: - Main motor power: 3 kW - Max. ring rotation speed: 40 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake device - Automatic stretch clamp and cutting system - Photoelectric sensor for automatic start of the wrapping cycle - Touch screen for adjusting machine parameters to product requirements - Operator safety systems Optional Equipment: - Various types of conveyors - Infeed and outfeed roller tables - Bubble wrap unit Technical Features: Wrapping dimensions: - Max. length: unlimited - Min. size (W x H x L): 600 x 450 x 1200 mm Conveyor Belt Features: - Useful length: 2,300 mm - Total length: 2,450 mm - Working height: 950 mm - Electric motor power: 0.55 kW - Max. speed: 10 m/sec - Max. load capacity: 100 kg/m Stretch Film Details: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron Hfjdofzrhdjpfx Ahneh

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 160 t, Hidrobrasil Double-Column Hydraulic Press – 160 t – 1,500 × 600 mm – Stroke 500 mm For sale is a hydraulic double-column press by Hidrobrasil, offering a pressing force of 160 t. This twin-cylinder press is specifically designed for inserting operations and small batch production, featuring robust construction and precisely adjustable press parameters. Its compact design and flexible table adjustment make it ideal for a wide range of production applications. ==== Technical Data & Information: Hydraulic Double-Column Press – 160 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Design: Double-Column / Twin-Cylinder Press - Machine Type: Small Batch Press - Pressing Force: 160 t (at 250 bar) - Year of Manufacture: 12/2020 - Weight: approx. 4,200 kg - Height: approx. 2,800 mm ==== Working Area - Open Height: 700 mm - Stroke: 500 mm ==== Table & Ram - Table Size: 1,500 × 600 × 100 mm (height-adjustable) - Ram Plate: 1,500 × 600 × 100 mm - Optional: 1,600 × 600 × 100 mm - T-slots: as per customer specifications ==== Speeds - Downward Speed (idle): 9.8 mm/s - Upward Speed: 15 mm/s ==== Hydraulics & Drive - Motor Power: 11 kW - Pump Output: 22 l/min - Oil Tank Volume: approx. 200 l - Pressure Adjustment: approx. 30–160 t via rotary knob ==== Control & Operation - Stroke Limiting via cam switch - Two-hand operation Hodpfx Ahjgz H Dhjnjfh - Adjustable stroke ==== Equipment - Height-adjustable table - Paint: RAL 5005 (Royal Blue) or per customer request - Ram plate in safety color (RAL 2009 or RAL 1023) - Assembly, commissioning, and training optional ===== Inserting operations, assembly processes, small batch manufacturing, forming technology, workshop applications Hydraulic press, double-column press, twin-cylinder press, insert press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured to German Machine Guidelines as well as European Machinery Directive (Directive 2006/42/EC), complying with EC standards and EU safety requirements. Additionally, our presses surpass Canadian and European safety regulations, fully meeting the national Brazilian safety directive NR 12, which builds on these standards. Our core strengths are custom machine building and press automation. We offer tailored hydraulic presses at surprisingly competitive prices, using mainly components from leading European manufacturers for the hydraulic systems.

Kondisi: bekas, Tahun pembuatan: 2006, Mesin bekas Tahun pembuatan: 2006 Perlengkapan dan data teknis: Panjang potong: 3600 mm Hjdpfx Ajyxyabshnefh Tinggi potong: 1644 mm Kedalaman potong: 60 mm Diameter mata gergaji: 250 mm Motor: 3 kW Termasuk penyangga benda kerja bagian tengah di semua bidang Termasuk perangkat pemotongan bagian sempit Termasuk penghenti panjang manual Dimensi sekitar: 4620 x 1500 x 2460 mm Lokasi: Röllbach Ketersediaan: segera

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg Hfsdji Dfidepfx Ahnsh - Immediately available -

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), de Hfedpfx Aefw Nc Uehneh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Hfsdpfsx D H Hcox Ahnsh Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.