Mesin las laser

Alpha Laser ALM200

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Hedpfeu A Dn Nsx Ahwji

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Hedpjfxyhfsfx Ahwoi Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, diameter poros: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rolls are hydraulically adjusted - Three rolls driven - 2 digital readouts - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V Hedpfx Ahoucqquswoi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 750 mm, jumlah slot dalam magazin alat: 36, panjang meja: 2.200 mm, lebar meja: 850 mm, model controller: OKUMA-OSP-HMI, pasokan pendingin: 15 batang, jarak dari tengah meja ke hidung spindel: 950 mm, daya motor spindle: 22 W, jumlah spindel: 36, pergerakan cepat sumbu Z: 16 m/menit, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 16 m/menit, hidung spindel: BT 50, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 50 rpm, beban meja: 2.500 kg, diameter alat: 120 mm, panjang alat: 400 mm, berat alat: 20 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, 3-axis vertical machining centre with OKUMA-OSP-HMI CNC Hodou Dinkopfx Ahwoi

Tahun pembuatan: 2007, Kondisi: diremajakan ulang (bekas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in water bath) / 800 kg (out of water bath) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled upon receipt of order. You will receive a 6-month warranty on all machine components. Hodpfxommfwuj Ahwji We are also pleased to offer you commissioning and training services.

Kondisi: baik (bekas), Tahun pembuatan: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Hsdpofrbcksfx Ahwoi Electromagnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray. Complete machine documentation available.

Kondisi: bekas, Tahun pembuatan: 2001, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, daya nominal (semu): 17 kVA, torsi: 82 Nm, produsen pengendali: Heidenhain, model controller: Mill Plus, tinggi total: 2.450 mm, panjang total: 4.000 mm, lebar total: 2.200 mm, lebar meja: 700 mm, panjang meja: 500 mm, beban meja: 200 kg, berat keseluruhan: 3.500 kg, We are offering a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Hedsw Dfbhopfx Ahwsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-position turrets with driven tools Turret 1 with Y-axis Parts catcher Belt filter system Hodpfjwh U D Hex Ahwji Chip conveyor IRCO Profimat bar loader

Kondisi: baru, Tahun pembuatan: 2025, The XTON Smart Cleaner SC1000™ Automatic Basket Cleaning System is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in a variety of industries and in the automotive sector. The cleaning unit is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is maximised by our proprietary XPOWER Active Cleaner BA fluid, which, combined with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed circuit at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-litre tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, as well as safe and convenient operation. The cleaning system is engineered for the automatic removal of contamination from surfaces made of cast iron, aluminium, and steel. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with 100 cm diameter - Heated tank with 300-litre capacity - Dual liquid filtration system - Level and temperature sensors - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-litre starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Basket load capacity: 300 kg - Adjustable working time: 0 - 99 min - Wash/liquid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch Hedpfeu R Urhsx Ahwoi - Degree of protection: IP 54 - Declaration of conformity: CE

Kondisi: baik (bekas), Tahun pembuatan: 1996, Die auf den Bildern von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Die Maschine verfügt über zwei Spindeln: - Eine Spindel: 6.300 min⁻¹, SK 40 Hedpfjruauqex Ahwei - Zweite Spindel: bis zu 42.000 min⁻¹, HSK E40 Die Spindel wurde 2018 erneuert.