Mesin gergaji format

Altendorf F45

Kondisi: baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, dapat dimiringkan 45°, pengangkatan, penurunan, dan pemutaran hidraulis, 1000 mm di sebelah kanan mata pisau, scoring unit, panjang potong 3200 mm, ekstraksi atas, 5,5 kW Harga ex lokasi Pengiriman dapat dilakukan dengan biaya tambahan! Hsdpsyaq Nbsfx Abxsk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Three-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data entry via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Hodpfx Abeyftzksxok Panel cuts with extendable fence mm: 3200x3200 Tilting range degrees: 0°/ +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note for used machines: • Technical data and prior sale subject to change and errors excepted. • Prices listed are ex-location – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, en-01 Hodpfx Aeywk H Aobxjk

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Motor utama 5,5 kW Penghenti paralel Panjang potong 3.500 mm Panjang meja 2.200 mm Lebar potong 1.000 mm Pisau scribe 0,75 kW Rentang kemiringan +/- : - 0,5 - 47° Diameter maksimum mata gergaji 500 mm Kecepatan putar 2.000 hingga 6.000 rpm Panjang potong 5.000 mm Lebar slot panduan pisau belah 13 mm Tegangan 400 V Arus 35 A Frekuensi 50 Hz Motor utama: ATB Tipe YAF 112 M/21-11, Daya 5,5 kW Penghenti panjang digital Pisau scribe Diameter mata gergaji 120 mm Diameter dudukan alat 22 mm Motor pisau scribe: ATB Tipe MAF 80/2 A-11, Daya 0,75 kW 1/menit termasuk meja vakum dan 2 laser Hodpfx Absyxpy Rjxek Pisau belah Altendorf 3 buah Perlindungan masuk Altendorf Piringan frais Leitz

Kondisi: baru, Saw blade diameter 420 x Ø 40 mm Cutting diameter 170 mm Cutting length 410 mm Saw blade dimensions 420x3.2/2.4x40 mm Speed 3,500 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 120 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting applications * Drive motor 3.0 kW - 400 Volt - Double-sided mitre adjustment (60° / 45°) with fixed stops - Compound mitre cuts on both sides at 45°, with fixed stops - Robust cast iron construction - Precision recirculating ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Continuously height-adjustable saw blade - Port for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound mitre adjustment via handwheel, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative, for aluminium and plastics Hsdpfx Abjxabztoxok - Continuously adjustable hydraulic feed brake - Pneumatic material clamping from above, standard equipment: * 2 vertical clamping cylinders, adjustable, with manual lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Kondisi: bekas, Tahun pembuatan: 2002, Panjang sled: 3000 mm Lebar potong pada pembatas lebar: 1000 mm Lebar potong pada pembatas panjang: 3200 mm Kedalaman potong: 150 mm Pisau scoring: ya Penyesuaian tinggi mata gergaji: elektrik Penyesuaian kemiringan mata gergaji: elektrik Penyesuaian pembatas lebar: manual Indikasi sudut mata gergaji: display digital Indikasi tinggi potong: display digital Indikasi pembatas lebar: skala Indikasi penggaris panjang: skala Diameter mata gergaji: maks. 450 mm Kecepatan putar: 4000 rpm Daya motor: 5,5 kW Hjdpsyvz Rcefx Abxsk Sambungan hisap: 120 mm dan 80 mm Panjang mesin: 3200 mm Lebar mesin: 2000 mm Tinggi mesin: 1600 mm Berat: 1000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1986, bekas, kondisi baik Merk: Altendorf Tipe: F45 Tahun pembuatan: 1986 No. mesin: 86-4-143 GS-teruji Motor: 5,5 kW Panjang meja geser: sekitar 2500 mm Lebar potong: sekitar 800 mm Dapat dimiringkan hingga 45° Diameter mata gergaji: 450 mm Pelindung paralelogram Pemberhenti sudut potong Koneksi ekstraksi D 80 dan 120 mm Hedpfeyvv I Nex Abxok Kebutuhan ruang sekitar 2500 mm x 1600 mm x 1500 mm Berat sekitar 1000 kg Lokasi: dari stok 54634 Bitburg, tanpa kemasan, siap diangkut Penyerahan dalam kondisi seperti dipertunjukkan, tanpa jaminan dan garansi.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Panjang potong efektif 5000 mm Diameter pisau 550 mm Kemiringan kepala elektronik Kemiringan dalam/luar dari 22°30′ hingga 135° Probe pengukur Hsdsyg Epvopfx Abxjk

Kondisi: bekas, Tahun pembuatan: 1978, panjang total: 3.400 mm, lebar total: 1.850 mm, tinggi total: 1.600 mm, de-hu-standard-spec Hjdpfxoyazbbo Abxjk

Kondisi: baru, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a promotional price with full manufacturer warranty. Pro Drive control system: - 3.5" color display with separate keypad - Automatic correction of dimensions for the rip fence and mitre fence when tilting the saw unit - Simple axis calibration - Machine diagnostics, operating hours counter, USB interface - Recall of the last input dimension (back function) - 99 programmable cutting programs Hodpfxsiz Aufj Abxjk - Grooving: with automatic step-by-step positioning of the rip fence - 400V / 50Hz – Europe, scale: scale in mm - Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic correction of cutting height when tilting the saw unit - Machine height 910 mm (basic equipment) - The control panel of the F 45 is installed at eye level, allowing all axes to be conveniently operated with all settings in view. - The single-handed operation of the swing-away device is easily accessible from the working position in front of the machine. - Another advantage: the smooth front of the machine ensures nothing stands in your way. INCLUDES OPTIONS: - M62003 Template holder - M64080 Extended cutting height with saw blade projection up to max. 204 mm - M51101 Single-sided tilting saw unit with 7.5 kW (10 HP) motor - M24030 2-axis scoring unit with electromotive height and lateral adjustment - M24037 LED lighting for the scoring unit hazard area - M41010 Table extension 840 mm - M34204 Double roller carriage, carriage length 3200 mm - M44404 Mitre fence, crosscuts up to 3500 mm - M44443 CNC rip fence, cutting width 1300 mm - M44450 Front support roller - M37003 On/off switch on double roller carriage Note for used machines: • Errors in technical details and intermediate sale reserved. • The prices quoted are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only respond to inquiries stating your address and telephone number!)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw Hsdpfx Abewrp Emjxsk - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Kondisi: bekas, Tahun pembuatan: 2004, Panjang sled: 2250 mm Lebar potong pada pagar lebar: 1040 mm Lebar potong pada pagar lintang: 2900 mm Kedalaman potong: 154 mm Skor: ya Hodpfeyt E Rgex Abxjk Penyesuaian ketinggian mata gergaji: elektrik / kontrol posisi Penyesuaian kemiringan mata gergaji: elektrik / kontrol posisi Penyesuaian pagar lebar: elektrik / kontrol posisi Penyesuaian pagar lintang: manual Tampilan sudut mata gergaji: tampilan digital Tampilan tinggi potongan: tampilan digital Tampilan pagar lebar: tampilan digital Tampilan penggaris meteran lintang: tampilan digital Penggaris lintang dengan fungsi potong kemiringan: ya Diameter mata gergaji: 450 mm Kecepatan putar: 4 Daya motor: 5,5 kW Koneksi ekstraksi: 80 dan 120 mm Panjang mesin: 2200 mm Lebar mesin: 2000 mm Berat: 1200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Gergaji format Pabrikan: Altendorf Tipe: F45 Tahun pembuatan: 2012 Jam operasional: sekitar 820 jam Panjang sliding table: 320 cm Lebar potong: sekitar 1.013 mm Tinggi potong: 175 mm Diameter maksimum mata gergaji: 500 mm Scriber: Ya - Rapido Penyesuaian lebar potong: Elektrik Hjdpfx Abjyvqzkjxsk Kecepatan putar: 2.000 - 6.000 rpm Penyesuaian kecepatan putar: Vario - Tanpa langkah Rem motor: Ya

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle Hodpfx Aboh Nvyzjxjk - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her, 3 rollers - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Swing-away panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table and Control-Plus control system Sliding table length 3000mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus system 4 axes CNC-controlled Cutting of chain dimensions and grooves with rip fence and cross-cut fence Hjdpfx Aoxw Ii Sjbxek Cut width correction on rip fence and cross-cut fence when blade is tilted 600 cutting programs Calculator function with result transfer to relevant axis Tool management Saw blade diameter up to 450mm Max. cutting height 150mm Cut width up to 1040mm, electrically adjustable Tilting angle and height electrically adjustable Crosscut fence up to approx. 3210mm, electrically adjustable, automatic coupling of the second stop flap for large cutting dimensions Folding rip fence Extraction ports 120 + 80mm Sliding carriage lockable Additional angle fence 2 used saw blades and one scorer included 2 riving knives 2-axis scoring unit, can be set electrically during operation 2 protective hoods 3 emergency stop switches Clip board at control panel CE marking Machine shows signs of use. No saw cuts in the sliding table. Original paint (special color), partly repainted. Machine has 18,985 operating hours. Came from a furniture factory and was clearly regularly maintained and well cared for. Condition as per original photos. A video of the machine in operation can be sent on request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier" for additional inventory.