Mesin bor 3 spindel, ketuk

Alzmetall AX 2/S

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Ffjdpfx Aofxyhfoagsw Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Ffsdpfx Ajgpxc Ssagjw Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height range: 95–240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 27 kg Dimensions (L x W x H): 160 x 230 mm Direct Acting Pneumatic Presses These presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke parts require processing with constant force. Outstanding Features: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life Ffsdpfxefv Awaj Aagow • Double-acting cylinders with end-position cushioning on both sides • Double guide rings in the piston ensure smooth and consistent operation • Oil-resistant sealing elements Special Features of the PND Series: • Spindle secured against rotation • On the PND 85/S, spindle return is carried out via only one cylinder chamber—resulting in additional air savings • Fine adjustment of working height is easy, fast, and precise in two stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine-tuning via the stroke limitation ring on the piston rod Additional Advantage: Faster cycle times and air savings

Kondisi: baik (bekas), Tahun pembuatan: 1985, nomor mesin/kendaraan: 4888, 25234 Technical Data: Fjdpfxswylvqj Aagefw - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle, Morse taper 3 - Infinitely variable spindle speeds: - Level 1: 160 – 1,125 rpm - Level 2: 320 – 2,250 rpm - Spindle travel: 120 mm - Feed rates: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - with 2 T-slots: 14 x 224 mm - Emergency stop button - Machine vice - Set of 10 HSS drills, 10 – 25 mm - Required space: approx. W 500 x H 1,750 x D 900 mm - Weight: approx. 270 kg

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Rapid traverse 22 mm/s Stroke speed 2 mm/s Ram surface 700 x 350 mm Total power requirement 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth. Fodpfx Ajvprv Reagjfw

Kondisi: baru, -New/ One Way -Immediately available -The price is ex warehouse Duisburg (available in other regions upon request) -We are happy to arrange delivery and crane unloading (costs on request) Our new 20-foot storage container is the perfect solution for your storage needs. It offers a secure, flexible, and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry, or for private purposes – this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide, and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Sturdy steel construction ensuring durability and resilience - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored items - Weather-resistant: Weatherproof and corrosion-resistant coating to protect your goods from rain, sun, and other environmental influences - Ventilation: Strategically positioned ventilation openings prevent moisture build-up and ensure optimal storage conditions Applications: The 20-foot storage container is ideal for storing tools, machines, materials, furniture, and much more. It can be used both temporarily and long-term and is perfect for construction sites, warehouses, events, or as additional storage space for your business. Additional benefits: - Easy handling: Thanks to its standardized dimensions, the container is easy to transport and position. - Flexibility: The container can be used at various locations and is mobile, allowing you to relocate it as needed. Ffedpfovx U U Iex Aagew - Custom modifications: Upon request, we offer tailor-made modifications to meet specific requirements, such as shelving systems or additional ventilation. Opt for our new 20-foot storage container for secure and efficient storage of your goods!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Ffsdpfefcw Apjx Aagsw Table dimensions: 650 x 650 mm Ram diameter: 140 mm (round) Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Fedpjb U Hwnjfx Aagofw Table size 520 x 400 mm Strokes 160 strokes/min Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, 8c57f6e5 Ffedpfxoynkumj Aagjw

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Fsdsvuuckspfx Aagjfw