Mesin Punch CNC

AMADA PROMECAM TOGU-III

Kondisi: bekas, DATA TEKNIS - Jumlah poros: 7 - Jumlah spindel: 2 SPINDEL UTAMA - Diameter batang maksimum: 20 [mm] - Panjang pemrosesan maksimum: 205 [mm] - Kecepatan spindel: 10000 [RPM] - Daya penggerak spindel: 3,7 [kW] - Resolusi minimum sumbu C: 0,001 [derajat] SPINDEL LAWAN - Diameter batang maksimum: 20 [mm] - Kecepatan spindel: 8000 [RPM] - Daya penggerak spindel: 2,2 [kW] - Resolusi minimum sumbu C: 1 [derajat] - Jumlah dudukan bus: 1 DUDUKAN BUS 1 - Jumlah posisi: 10 - Jumlah posisi yang digerakkan oleh motor: 4 PERALATAN BAGIAN DEPAN Nljdpfx Aey Dim Isiveg - Jumlah posisi: 7 PEMROSESAN DENGAN SPINDEL LAWAN - Jumlah posisi: 4 - Jumlah posisi yang digerakkan oleh motor: 4 - Kecepatan perkakas yang digerakkan: 8000 [RPM] SUPPLAI LISTRIK - Tegangan suplai: 400 [V] - Total daya penggerak: 7 [kW] BERAT DAN DIMENSI - Luas yang dibutuhkan: 2200 x 1200 [mm] - Tinggi mesin: 1700 [mm] - Berat mesin: 2200 [kg] JAM KERJA MESIN - Jam saat beroperasi: 107555 [jam] - Jam operasi: 91025 [jam] - Jam spindel: 54783 [jam] AKSESORI - Pengontrol: Fanuc 300is-model A - Bus panduan yang digerakkan - Pengambilan komponen - Konveyor sabuk komponen - Pengeluaran komponen - Tangki cairan pendingin

Kondisi: bekas, TECHNICAL DATA Nlsdpfjuhb Uhox Aivjg - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, tc1 Nedey D T Rwjpfx Aivolg

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in vacuum Temperature control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of stabilization period Control voltage: 230 VAC / 24 VDC Usable chamber dimensions: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold furnace): < 5 * 10-5 mbar with clean, dry furnace Footprint: 900 x 1900 x 3000 mm Total weight: approx. 1500 kg Sound pressure level: < 70 dB We do not guarantee the accuracy, completeness, or currentness of the provided information. Nljdpfxoiryyae Aivog

Kondisi: baru, Saw blade diameter: 370 mm Nljdpfjd Iin Hex Aiveg Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 4.937 h, gaya penekanan: 102 t, berat keseluruhan: 7.200 kg, jumlah sumbu: 8, Diese 8s AMADA HRB 1003 press brake was manufactured in 2023. It offers a pressing force of 1000 kN and a stroke of 250 mm, making it suitable for a variety of applications. With a weight of 7,200 kg and featuring the AMNC3i control system with Lite Mode, it provides advanced functionalities. Take advantage of this opportunity to purchase the AMADA HRB 1003 press brake. Contact us for more details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full-load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3,110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode Njdpeyk Dc Njfx Aivelg • Configuration: Without crowning • Tool clamping: S-GRIP DUO Available tooling: - 3 Amada punches No. 831206, 835 mm long, and 1 segmented version - 3 Amada punches No. 820806, 835 mm long, and 1 segmented version Plus dies: - 3 pcs V 16 / H 120 / 85° x 835 mm long and 1 segmented version - 2 pcs V 16 / H 120 / 88° x 835 mm long - 3 pcs V 32 / 85° x 835 mm long and 1 segmented version - 3 pcs V 8 / V 12 / 88° x 835 mm long and 1 segmented version - 3 pcs V 16 / V 25 / 88° x 835 mm long and 1 segmented version - 3 pcs V 8 / V 12 / 30° x 835 mm long and 1 segmented version

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm FRONT TOOLPOST - Number of positions: 5 BACK WORKING STATION Nlodpfxeuha Nwo Aivsg - Number of positions: 4 - Number of driven positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Spindle hours: 18,849 h ACCESSORIES - CNC control: Fanuc 31i-model A - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * With high-pressure pump: 20 bar - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of driven tool holders: 5 - Double drilling/milling tool holder: 1

Kondisi: baru, Tahun pembuatan: 2026, Table length: 3048 mm Table width: 1524 mm Torch heads: 1 Control: CNC Workpiece weight: 911 kg Travel speed: 180 m/min Nlsdpfx Ajwnt Eisiveg Weight: 4150 kg Space requirement approx. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table Configuration: 1. Bodor Power 3kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Mortise-and-tenon style welded segmented bed 5. Extended aluminum gantry 6. Bodor servo motor and driver 7. Bodor rack and pinion 8. One-click processing 9. Bodor Lightning perforation technology 10. Expert database for high-speed cutting 11. Automatic adjustment of cutting gas pressure 12. Open-door safety protection 13. Fault alarm function during cutting 14. Ergonomic remote control (Bodor Mango®) 15. Active anti-collision function 16. Intelligent anti-shake 17. Gas-saving continuous-flow nozzle 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water chiller 21. Extraction system 22. Wear parts kit CUTTING CAPACITY: Mild steel 14 mm Stainless steel 10 mm Aluminum 6 mm OPTIONAL: LANTEK EXPERT II CUT software incl. postprocessor

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Nlodpfjv Rwu Uex Aivjg Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), two-hand operation

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Njdpfxefz U S Es Aivolg Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.