Gergaji pita

Kasto Twin A5

Kondisi: bekas, Tahun pembuatan: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Maximum multiple feed length: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control system; Lsdpfx Asvxwkfsahjhr Frequency-controlled saw band drive; Minimum quantity lubrication; Chip conveyor; Powered infeed conveyor 6 m + 3x short roller conveyor 1 m; Outfeed conveyor 2 m; Machine can be inspected under power.

Kondisi: diremaj di bengkel (bekas), Modernized machines with new LTG control system StoreControl L Ledsn D A Rrepfx Aahohr External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with a load capacity of 500 kg Usable (clear) dimensions per carrier: Width: 1,300 mm Depth: 863 mm Height: from 50 mm to 750 mm Total load capacity up to 40,000 kg Start of access opening at 870 mm above finished floor level, access opening height 845 mm Color scheme: GREY / BLUE, carriers sendzimir-galvanized Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical modifications, and possible deviations from photos. Delivery & installation currently mainly in Germany, Austria, and neighboring countries.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 47.600 h, nomor mesin/kendaraan: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Lhedpjh Dzqlsfx Aahsr Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X axis Z axis C axis Automatic tailstock Chip conveyor

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross travel: 920 mm, intermittent cross feed: 750 mm/pulse, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic plate dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000 h, cycle time: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and disassembled. Documentation available. On-site inspection possible. Lsdpowi Tpkjfx Aahjhr

Kondisi: baru, Tahun pembuatan: 2025, Patented mitre system Infinitely variable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range: 30° right / 45° left Lodpfx Aash S Nxpjhshr Cutting capacity in mm: 45° left: round 300, flat 300 x 300 90°: round 410, flat 620 x 410 45° right: round 360, flat 420 x 360 30° right: round 300, flat 300 x 300 Remaining piece length without bundle clamping: 60 mm Recommended options: Micro-spraying device Laser line indicator Clamping pressure regulator Powered chip brush Manual lifting roller Mounting elements

Kondisi: baru, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Tapping capacity: M 8 Lhsdpob Eldnofx Aahor Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Stepless spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Distance spindle/table: up to 380 mm Table size: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg 3-phase motor, frequency-controlled: 1.1 kW Equipped with a full-featured tapping device and programmable digital display Machine in stock and available immediately

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Lhsdpod Ab H Hsfx Aahor Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Item number: SH230-1NCHS Motor power: 2.2 kW Vice opening: 235 mm Blade dimensions: 2950x27x0.9 mm Weight: 1,000 kg Speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic band saw with semi-automatic and fully automatic modes. Lhedpfxechhfus Aaher Max. remnant piece length: 70 mm. Bundle cutting up to 230 x 230 mm. CNC band saw equipped with the new MEP 50 Windows-based control system. Material feed via stepper motor over ball screw spindle, mounted on opposing ball bearings. Single stroke of 500 mm, repeatable for any cutting length. Easy programming: just enter cut length and quantity, then press "START". Electronic blade tension control. Automatic cutting force monitoring via a servo valve located directly on the cylinder. Band rotation control with instant stop in case of band blockage.

Kondisi: bekas, Clamping plate, scribing/marking plate, surface plate, measuring table, welding table, straightening plate - Clamping plate comes from a measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate is reinforced with support ribs - Includes 4 adjustable leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2749 kg Ljdpfxofc T Tqs Aahehr

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Lodpfxscc D Ddo Aahshr Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.