Mesin pemotong laser

AMADA Alpha Laser 2415 III

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, - GEBRAUCHT - ROHRBIEGEMASCHINE ACHEN: 3 MAX. ROHRDURCHMESSER: 30x2 mm Hedpfxjvhc Uue Aa Njng ARBEITSLÄNGE: 3000 mm X-ACHSEN-POSITIONIERGESCHWINDIGKEIT: 900 mm/s Y-ACHSEN-BIEGEGESCHWINDIGKEIT: 200 °/s Z-ACHSEN-DREHGESCHWINDIGKEIT: 360 °/s MAX. BIEGERADIUS: 20 BIS 170 mm STEUERUNG: DNC800

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Hnjdpfx Aaju Ixwio Nog

Kondisi: baru, High-quality bench drill with top-tier features. FLOTT TB 13 Plus MK II (212503) FLOTT TB 13 Plus B 16 (212500) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, premium-quality drill head cover with ergonomically inclined front - LED lighting - Rapidly adjustable, ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Emergency stop mushroom button - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Power cable with safety plug (Schuko) - 3-year warranty in single-shift operation Technical data: Drilling depth (mm): 60 Thread cutting capacity (depending on pitch): M10 Speed indication: Digital Drilling depth display: Digital Hedpfei Hpyqex Aa Nong Drilling depth stop: Stop ring (positive-locking) Feed (mm/rev): Manual Table height adjustment: Rack and pinion Motor Three-phase AC – frequency controlled, mains connection 230 V (kW): 0.54 Continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable working surface (W x L) (mm): 300 x 250 Spindle/working surface (mm): 85-370 (table), 420 (base) T-slot size (arm), spacing (mm), width (mm): Cross slots, 2 pieces, 14/26 Machine dimensions without packaging (mm): 400 x 520 x 850 Machine dimensions with packaging (mm): 452 x 700 x 1,130 Weight (kg): 62 Note: Further models available on request.

Kondisi: siap digunakan (bekas), Operates using the magnetic particle inspection method, complete with documentation and accessories. On-site inspection is possible. Hnjdpfoq Npf Ujx Aa Nog

Kondisi: bekas, Tahun pembuatan: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Control: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cut-off and double-ended machining machine suitable for the pre-processing of trapezoidal thread spindles and other round workpieces, including cutting from bar stock and both-end machining such as chamfering, face milling, and drilling on stationary parts with rotating tools. The machine consists of: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar feeder for bar length 2 – 3.5 m - Standard version for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar loading unit - Standard feed gripper - Indexing turret with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Turret swivels in both directions - Sawing unit with worm drive TR 200.00, stroke 100 mm - Saw blade: 350 mm, speed 25/39 rpm - Motor power: 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds: 360/720 rpm, 1.8/2.8 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Machining unit no. 3 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds: 943/1882 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Discharge chute - Metric ruler rails for all adjustment movements - Hydraulic system with delivery pump SAUER SUNDSTRAND - Accumulator Hjdpfx Aaovp Sd Io Nsng - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical system in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Signal beacon for machine downtime indication - Central lubrication - Chip conveyor In 2011, a comprehensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc., were replaced. The machine has hardly been operated in recent years, with total operating hours estimated by the owner at approx. 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: bekas, Tahun pembuatan: 2008, en Hjdpfevvtpxsx Aa Neng

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut CNC 2 sumbu TAKISAWA TW 30 bekas adalah bubut CNC meja miring dengan rel datar berukuran sedang yang kokoh dan cepat, dilengkapi dengan kontrol CNC FANUC 21-T. Tahun pembuatan 1996 (dipasang 1999), sesuai standar "CE". Spesifikasi utama: Hedpfx Aajxfinxe Njng - Diameter maks. benda kerja di atas meja: 540 mm - Diameter maks. bubutan: 330 mm - Panjang maks. bubutan: 510 mm - Diameter maks. bubutan dari batang: 75 mm - Hidung spindle: ASA 8” - Spindle: kecepatan putar maks. 3.250 rpm - Daya motor spindle: 15 kW - Turret: 10 posisi alat - Berat mesin: 3.800 kg Perlengkapan termasuk: senter belakang dengan sleeve otomatis, chuck 3 rahang otomatis ukuran 250 mm, dan buku manual penggunaan serta perawatan.

Kondisi: bekas, Tahun pembuatan: 2008, Technical details: Workpiece diameter – max.: 29 mm Hnjdpfslqac Sox Aa Njg Workpiece diameter – min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece sizes: Diameter 26mm – 29mm Length 65mm – 66mm By using interchangeable parts in the clamping device, handling unit, etc., diameters of up to approx. Ø50mm and total lengths of up to roughly 400mm should be possible with some modifications. This is also dependent on tool lengths, machining lengths on the component, etc.

Kondisi: bekas, Tahun pembuatan: 2003, Travel X 800 mm Travel Y 600 mm Travel Z 805 mm Control unit: Sinumerik 840D Machine weight approx. 13 t 1 horizontal machining center Manufacturer: HECKERT Model: CWK 500D Year of manufacture: 2003 Serial no.: 16087 Control, make: Siemens, type: Sinumerik 840D Travels X/Y/Z: 800 x 600 x 805 mm 2-station pallet changer Pallet size: 500 x 500 mm NC rotary table: 360 x 0.001° 60-position tool changer Tool holder: HSK 63 Max. spindle speed: 15,000 rpm Coolant through spindle (IKZ): 50 bar Hnjdpfx Aajuddgfj Nog Operating hours: 32,450 Spindle hours: 6,080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Preparation for infrared measuring probe

Kondisi: bekas, TECHNICAL DATA - Manual lapping diameter: 1.5 - 165 mm - Automatic lapping diameter: 1.5 - 101 mm - Travel distance: 6 - 170 mm MAIN SPINDLE Hnodpfowdacyex Aa Nog - Spindle speed: 200 - 3000 rpm - Spindle drive power: 4.1 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 10.5 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,600 x 1,220 mm - Machine height: 1,900 mm - Machine weight: 1,000 kg ACCESSORIES - Coolant tank - Workpiece loading/unloading robot