Tekan eksentrik - satu kolom

AMBOLD PEEV 25.3

Kondisi: baru, Tahun pembuatan: 2024, Mitre saw with a saw blade diameter of 600mm (optional 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinder height and angle continuously adjustable) - Two-hand safety control Optional Available: - Automatic mitre adjustment Itedpfxed Rhzis Aahsr - Roller conveyor with length stop or positioning system - Fully automatic sawing version - Pre-feeding magazine - Horizontal clamping device - Extraction system - Additional accessories available on request We are happy to provide you with a customised offer tailored to your requirements. The machine can be viewed and tested in 56812.

Kondisi: baik (bekas), Tahun pembuatan: 1977, Pressing force 250 t Upright distance 1,120 mm Stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface 1,100 x 900 mm Table height above floor 950 mm Itsdpfx Aox Ug Doahsr Lateral upright clearance 700 mm Ram surface 1,100 x 900 mm Speed down mm/s Speed up mm/s Working speed mm/s Oil capacity 730 l Drive power 56 kW Weight 25 t Space requirements (WxDxH) 2.3 x 1.55 x 3.96 m Additional Information with electro-hydraulic drive, hydraulic (20) and electrical control system according to UVV, light curtain (Sick), upper and lower stroke limit, pressure- and travel-dependent controllable, cut shock absorber, short-stroke control, new control (Mitsubishi), safety control (PNOZ Multi), screen control with touch screen, control cabinet

Kondisi: bekas, Tahun pembuatan: 2008, vekt0a7i Itedpowvl Aiefx Aahor

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Parts cleaning machine / spray cleaning system type L102 Automatically operating hot-water parts washer with basket drive via geared motor, two stainless steel wash pumps (manufacturer: Lowara), two circulating three-sided spray systems. - Basket diameter: 910 mm - Working height: 520 mm Itodohymmgopfx Aahjr - Max. load weight: 200 kg - Spray pressure: 2 x 3 bar - Tank capacity: 175 litres - Heating: electrically adjustable (RT - 90°C) - Machine dimensions (LxWxH): 1,300 x 1,250 x 1,990 mm - Empty weight: approx. 300 kg - Wash timer freely adjustable (minutes and hours) - Complete cleaning machine (interior and outer cladding) made of stainless steel 1.4301 - Water circulation system and loading basket made of stainless steel 1.4301 - Bath cover with fine filter (2,000 micron) - 2 suction filters for pump protection - Steam and vapour extraction with condensate return This is a demonstration unit from the Glogar Technology Center.

Kondisi: baru, Hydraulic combined shearing machine with two independent cylinders, punching station with mechanical back gauge and adjustable cylinder stroke, notching, flat bar, round bar, and profile shearing with adjustable back gauge and automatic shear operation, double foot pedal, centralized lubrication system, work light. The machine is supplied with safety guards compliant with CE regulations, CE declaration of conformity, and user manual. Applied power: 85 tons. Motor power: 7.5 kW. Dimensions: 1,920 x 950 x 2,040 mm (L x W x H). Weight: 2,315 kg. PUNCHING: Punching capacity: 33 mm diameter x 20 mm thickness. Throat depth: 355 mm. Punch stroke: Itsdpfxsggbt Ss Aaher 80 mm. Working height: 1,080 mm. SHEARING: Flat bars: 380 x 20 mm. 480 x 15 mm. Blade length: 482 mm. Round bars: 50 mm diameter. Square bars: 50 mm. Angle profiles at 90°: 150 x 150 x 15 mm. Angle profiles at 45°: 80 x 8 mm. NOTCHING: Max thickness: 13 mm. Width: 52 mm. Depth: 100 mm. Working height: 940 mm.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Iodpjfg E Hpefx Aahetr Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Tahun pembuatan: 2025, lebar kerja: 1.250 mm, Sudut pembengkokan (maks.): 160 °, ketebalan pelat baja (maks.): 1 mm, tebal plat aluminium (maks.): 12 mm, ketebalan pelat tembaga (maks.): 12 mm, berat keseluruhan: 100 kg, panjang total: 1.500 mm, This is a lightweight yet robust segmented folding machine with a working width of 125 cm. Directly from Prod Masz‼️ Segmented bending machine, length 1250 mm Lightweight (despite its capabilities) at only 105 kg, 100% segmented Easy to transport Segment fingers can be changed without keys or tools Plus several other convenient features Need reliable equipment? Have special requirements? Contact us‼️ We provide professional solutions with maximum durability. Prod Masz stands for reliability. Triple-segmented folding machine SGR-1250/1.0mm Technical data: - Max. working width: 1250 mm - Max. bending angle: 160 degrees - Bending beam thickness: 15 mm - Max. sheet thickness (steel): 1.0 mm; aluminium: 1.2 mm - Weight: 105 kg - Segment widths: 30, 40, 50, 60, 70, and 100 mm - Three beams equipped with segmented fingers (fully segmented) - Degree scale - Clearance: 55 mm Total length: 1.6 m Height: 45 cm Price: €3,200 Delivery time: weekly Cash payment upon delivery Nationwide delivery within Germany: €180 Itsdpscgmf Rsfx Aahsr We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT as applicable.

Kondisi: baru, The bSander 75.200 & 150.200 are industrial belt sanders designed for grinding tube ends and profile edges, for edge sanding, and for face sanding on the top surface of the machine. bSander 150.200: Belt dimensions: 150 x 2000 mm Belt speed: 29 m/s Drive power: 4.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg bSander 75.200: Belt dimensions: 2000 x 75 mm Ijdsd Dp Aaepfx Aahetr Belt speed: 29 m/s Drive power: 3.0 kW // 3x400 V // 50 Hz Dimensions (L x W x H): 700 x 490 x 1130 mm Weight: 72 kg Price on request

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Itedpfx Aaekvnumshjr Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Tahun pembuatan: 2022, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 15 m/menit, berat keseluruhan: 7.400 kg, kecepatan spindel (min.): 4.000 rpm, kecepatan spindel (maks.): 10 rpm, jarak lintasan sumbu Y: 1.500 mm, daya: 22 kW (29,91 hp), DYAS Plattenbohrzentrum - DYAS PDC-1500 Anzahl Bohraggregate: 1 Vertikal Motorleistung: 22 kW Spindelmoment: 280 Nm Spindeldrehzahl: 10–4000 U/min Automatischer Werkzeugwechsler (ATC): 16 Plätze Max. Werkstückgewicht: 760 kg Itsdpfxegbfaxo Aaher Max. Bohrdurchmesser: Ø40 mm