Mesin lainnya

AMIS Holzhacker-Holzhäcksler H880/250

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 237042, daya: 25 kW (33,99 hp), berat keseluruhan: 1.575 kg, jenis bahan bakar: listrik, warna: kuning, Based on personal experience: The battery easily lasts a full workday even under continuous operation. Internal number: M1241 Manufacturer: Schliesing Itjdsvmz N Ujpfx Aaher Vehicle type: trailer chassis Drive type: electric Maximum wood diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (kg): 1575 Equipment: Power Control System – Whisper Cut chipping system The Schliesing mid-range series is now also available as an electric chipper: the Schliesing 325MX-E. The powerful brushless asynchronous motor with 25 kW output and 120 Nm torque guarantees high productivity with familiar pulling power. The batteries are designed to allow a full day’s work without recharging. The 325MX-E enables emission-free chipping with low noise levels and delivers uncompromising productivity for logs up to 20 cm in diameter. Motor and chassis: • Brushless asynchronous motor with 25 kW and 120 Nm torque • Fully galvanized, corrosion-resistant single-axle chassis rated for 80 km/h including EU type approval • Robust, fixed and widened steel fenders • Heavy-duty support wheel at the front and rear support stand • Hitch with overrun brake and soft-dock ball coupling or DIN towing eye • LED lighting conforming to German Road Traffic Licensing Regulations (StVZO), impact-protected • Pneumatic tires 205/65 R15 C Battery: • LEP battery (Lithium Iron Phosphate) with a capacity of 300 Ah at 96 V • Enables full-day operation without recharging, no recharging required after long idle periods • Energy recovery through regeneration of blade disc kinetic energy during operation • Charging port: standard plug 220-240V/16A • Full charging time: 8 hours • Guarantee for 1,000 charge cycles at 80% State of Health (SOH) Housing / feed hopper / discharge chute: • Folding feed hopper with minimum feed depth of 1,500 mm • Fully galvanized, corrosion-resistant hopper flap • Hopper inner dimensions: width = 1,040 mm, height = 960 mm • Swiveling discharge chute with adjustable deflector • Discharge chute mounted on ball bearing turntable • Key machine parts with sound insulation (especially chipper hood and discharge chute) • Two emergency stop switches: on top of the hopper and on the side of the hopper flap Chipping system: • Chipping system with safety cut-off as per EN 13525 • Robust chipping disc Ø 655 mm, 35 mm thick • Enclosed knife system for fast, safe, and precise knife changes • Continuously adjustable chipper knives • Chipper knives can be reground multiple times for long service life (approx. 10x) • Horizontally usable counterknife and vertically usable counterblade, each two-fold for increased service life • Anti-wrap protection at the main bearing of the rotor disc Hydraulic feed: • Feed control with independent hydraulic circuit • PowerGrip feed roller, 240 mm wide, with hydraulic feed. Highly grippy, aggressive, and uniform feed through a separate hydraulic motor on each roller • Parallel-guided top roller ensures regular and uniform feed, preventing material jamming • Hydraulically adjustable feed speed and, therefore, chip size • Hydraulic tank fill level indicator OPTIONS OVERVIEW: The Whisper Cut® • V-shaped knives draw in wood more evenly and with less vibration • In combination with the centering PowerGrip roller, chipping produces minimal movement of the material

Kondisi: bekas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtain-sided low-bed trailer, heavy-duty trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Ijdpfx Aot N Antsahjtr Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Deck height: 840 mm Loading height under curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (can also be used with the curtain frame removed and the tarpaulin pushed forward) - Spare wheel mounted at front bulkhead - Separate lifting and lowering of front and rear axles - Middle axle designed as lift axle - Towing drawbar – telescopic, multi-stage extension - Extremely robust lashing eyes on the outer frame and in vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is from first ownership. The trailer has been de-registered since 2025.

Kondisi: bekas, jarak tempuh: 1.001 km, daya: 46 kW (62,54 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: merah, berat keseluruhan: 13.500 kg, berat kosong: 11.800 kg, berat muatan maksimum: 1.700 kg, konfigurasi gandar: 4x4, jumlah tempat duduk: 1, pendaftaran pertama: 01/1979, Tahun pembuatan: 1979, jam operasional: 13.655 h, ukuran ban depan: 9.00-20, kabin pengemudi: lain, jarak roda: 2.500 mm, kecepatan maksimum: 20 km/j, Perlengkapan: lampu depan tambahan, penggerak semua roda,

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction - 5 pairs of drive wheels - Milling arm constructed from heavy-duty steel - Hydraulic milling head - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR. Itedpfotuyr Isx Aahjr

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 55,4 kW (75,32 hp), berat keseluruhan: 2.050 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, berat operasi: 2.050 kg, berat kosong: 2.050 kg, bahan bakar: diesel, Technical Data: Round timber up to 24 cm Feed width: 300 mm Base weight approx. 2,050 kg Year of manufacture: 2022 4-cylinder Hatz turbo-diesel engine With common rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo-diesel engine 55 kW (74.8 hp) with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Drawbar with overrun brake Front jockey wheel Rear support stand Lighting according to German Road Traffic Licensing Regulations (StVZO), impact-protected Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed, thus controlling chip size Chipper knives can be re-sharpened several times (approx. 10x) for long service life PowerGrip feed roller, 300 mm wide, with hydraulic feed Especially grippy, aggressive and consistent feed: each roller has its own hydraulic motor Discharge chute with adjustable deflector, swivelable Discharge chute mounted on ball-bearing slewing ring Relevant machine parts soundproofed Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo-diesel engine with DPF, delivering 55.4 kW (75.3 hp). Automatic industrial overrunning clutch between engine and chipper disc, protecting engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV approval. Robust, fixed steel mudguards. Provision for front jockey wheel and rear support stand. Height-adjustable drawbar with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting system per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU type approval (homologation). Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Folding feed hopper with minimum feed depth 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): Width = 1,160 mm, Height = 1,040 mm. Swivelable discharge chute with adjustable deflector. Discharge chute on ball-bearing slewing ring for flexible positioning. Sound insulation on relevant machine parts such as chipper hood and discharge chute. Emergency stop button on top of hopper and on the side of the hopper flap. Chipping Unit: Safety system in accordance with EN 13525. Chipper disc diameter Ø 800 mm, thickness 40 mm. Closed knife system for quick and safe knife changes. Continuously adjustable chipper knives, can be resharpened multiple times for extended service life. Horizontal counter blade can be used 4 times and vertical shear bar 2 times for long service life. Itsdpjv Evx Uofx Aahjr Wrap protection at the main bearing of the chipper disc. Hydraulic Feed: Feed control with independent hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for grippy and consistent material transport. Parallel guide of the upper roller for even feed without misalignment. Hydraulic adjustment of feed speed to control chip size. Hydraulic oil tank level indicator.

Kondisi: bekas, jenis bahan bakar: diesel, warna: hijau, Tahun pembuatan: 2015, jam operasional: 11.445 h, Tahun pembuatan: 2015 Tahun model: 2015 Tujuan penggunaan: Konstruksi Berat kosong: 32.000 kg Kondisi umum: Rata-rata Kondisi teknis: Baik Kondisi visual: Rata-rata Itedot Dlwyjpfx Aahjr Harga: Atas permintaan Hubungi Ferdinand Pater untuk informasi lebih lanjut.

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Very robust roller conveyor system with hydraulic lifting and lowering cross transfer. 1st section: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Installation height 1,000 mm. Integrated hydraulic lifting and lowering cross transfer with 4 chain strands. Distances: 1,500 - 1,300 - 1,000 mm. Fully sheeted. Hydraulic support rollers. Driven by geared motor. New bearings. Ijdpfx Aot Hg Huoahstr 2nd section: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Integrated hydraulic lifting and lowering cross transfer with 6 chain strands. Cantilevered design, allowing cut material to be conveyed to the left or right beneath the roller track. Fully sheeted. Includes hydraulic power unit for both roller conveyors.

Kondisi: baik (bekas), Tahun pembuatan: 1996, Shredder 4-poros dari produsen ternama Untha tipe RS 30 2 x 7,5 kW Iedpfjxpn Hnox Aahjtr Telah diuji fungsi

Kondisi: baru, daya: 36,4 kW (49,49 hp), jenis bahan bakar: diesel, kondisi rantai: 100 persen, Tahun pembuatan: 2023, jam operasional: 5 h, Perlengkapan: kabin, lampu depan tambahan, palu hidrolik, track baja, track karet,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Iedpfogmh H Tsx Aahetr Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.