Kondisi: baik (bekas), Tahun pembuatan: 2016, jam operasional: 1.060 h, Fungsionalitas: berfungsi sepenuhnya, Bale press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Dodpoy Ni Shefx Aaqskl Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or YouTube channel. The hydraulic hoses should be replaced. We are happy to answer questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the above information or any potential errors. This offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, advance payment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. You can find a video on our website or YouTube channel. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: Dsdpfx Aey Ni Rdoaqokl All technical data is based on manufacturer’s specifications. We do not accept liability for any errors in the information provided. Subject to prior sale and change without notice. Inspections are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2017 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Dkedoy Ni I Aspfx Aaqol Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, Cardboard, Film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. We are happy to answer any questions you may have about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer’s specifications. We do not accept any liability for the information provided or possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLS, year of manufacture 2013 Technical Data: Manufacturer: Dixi Year of manufacture: 2013 Dksdpey Ni Hxjfx Aaqel Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00–14:00. On Fridays, we are available from 08:00–13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Dixi Year: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Size: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. For questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not accept any liability for the details provided or possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made in advance payment, ex works, without warranty or guarantee. Dkodpfx Aasy Ni Hrsqsl

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLD, Year of Manufacture 2015 Djdpfx Aajy Ni Eujqokl Manufacturer: Dixi Model: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale against advance payment ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2012 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Pressing Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370-410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Dedpfx Aajy Ni Dqoqekl Materials: Paper, cardboard, film The baler is in good condition. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical specifications are based on information provided by the manufacturer. We do not accept liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2021, hsm-vpress-860plus-en Dodpfsy Ni Ddex Aaqskl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, 1 Dodpfoy I Rnuox Aaqskl

Kondisi: siap digunakan (bekas), Spesifikasi teknis mesin press Dixi 60 AUTOMAT Bukaan pemuatan (L x T): 1550 x 1000 mm Daya penggerak: 31,5 kW Gaya tekan: 60 t Berat bal (tergantung material): 350–600 kg Dimensi bal (L x T x D, dapat disesuaikan): 1100 x 800 x 300–1600 mm Waktu press/siklus: 13/24 dtk Berat mesin: 7000 kg Djdpev Amw Nofx Aaqokl

Kondisi: baik (bekas), Tahun pembuatan: 2012, jam operasional: 5.812 h, Baling Press Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (slat belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive: 30 kW Pressing force: 50 t Feed opening: 1,600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Maximum feed volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (LxWxH) Machine weight: approx. 10,500 kg Dkjdpsy Idifefx Aaqel Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Incline conveyor Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, plastic film, PET bottles Please note: All technical data is based on manufacturer's specifications. We assume no liability for the stated information or possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, sold as-is without warranty or guarantee.

Kondisi: sangat baik (bekas), Produsen: Strautmann Tipe: PP 1207 Plus Ukuran bal (PxLxT): 1200 x 1100 x 730 mm Berat bal: sekitar 400 - 500 kg Dimensi luar (PxLxT): 1850 x 1047 x 3079 mm Tinggi transportasi: 2500 mm Lubang pengisian: 1190 x 600 mm Tekanan pengepresan: 59 ton / 580 kN Kapasitas: 1 - 2 bal/jam Jumlah ikatan: 4 Berat mesin pres: 2300 kg Daya listrik: 400 V / 50 Hz Daya terpasang: 4 kW Lokasi instalasi: atap dalam/luar ruangan Tingkat kebisingan: kurang dari 80 dB(A) Tahun produksi: 2003-2005 Saya juga memiliki baler Strautmann PP 1207 tahun 2009-2011 harga 5.500 euro Dkjdpfx Aaov Aiymjqel Juga tersedia baler Strautmann PP 1208 tahun 2014-2015 Strautmann AutoLoadBaler tahun 2018 harga 7.500 euro

Kondisi: bekas, Screw Press REG-MAC for drying films and fibers, and for compacting foam materials (e.g. Styrofoam, EPS) drive motor 55 kW Dsdjy Icn Tjpfx Aaqokl

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 39117, PRESTO kompresor sekrup dengan penghancur karton dan kontainer penghubung (30 m3) Dkjdpfx Aey N Rp Ioaqsl

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour Dksdpfx Aasu Thh Eeqsl – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, jam operasional: 28.748 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 570 kg, berat keseluruhan: 20.000 kg, kapasitas tangki oli: 600 l, daya: 37 kW (50,31 hp), laju aliran volumetrik: 350 m³/jam, en-1 Dksdpfxevn Tg Is Aaqel

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2024, en-GB Dkodpfxsu Thhro Aaqel

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical data baling press / can compactor / sheet metal press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Djdpsu Th S Sjfx Aaqjkl Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput (empty beverage cans): - with one press stroke: approx. 1.7 t/hour - with two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1200 kg/m³ Hydraulic oil tank capacity: 850 l Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing sheet metal cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition—see the functional video after the overhaul—and is sold with a 12-month OBM parts warranty. Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection is possible by appointment. We do not accept liability for the technical data or potential errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, kapasitas tangki oli: 3.100 l, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2025, Technical Data Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Feed volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic diagrams Comments: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantled press ram, disassembled into individual parts, overhauled the mechanics • Replaced the front two main running rollers • Replaced the knives on the press ram • Main hydraulic cylinder dismantled and disassembled, checked cylinder tube and piston rod, replaced complete set of seals • Counter-blade in the frame replaced Dedpfx Asx Dnb Ujaqskl • Knife clearance adjusted to approx. 3 mm • Upper steel guide rails on the left and right in the frame replaced • Removed worn press floor, replaced base plate with wear-resistant HARDOX steel • Dismantled tying and twisting unit, disassembled, overhauled the mechanics, replaced all twisting shafts and ball bearings • Replaced all wire spools in the needle heads • Cleaned and readjusted wire cutters, lubricated and tensioned chains • All wire guide rollers refurbished • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic modes; see our video of the machine function test. Complete documentation is included (operating manual, CE declaration, electrical/hydraulic diagrams). Inspection is possible by appointment. We accept no liability for the technical data or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2024, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A Dkedpeu Th D Rofx Aaqjl 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, kapasitas tangki oli: 400 l, tahun perombakan terakhir: 2025, laju aliran volumetrik: 108 m³/jam, en-GB Dksdpsw U Dt Nsfx Aaqjl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Djdpfsvf E Avsx Aaqjkl Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) Dkedpfx Asviwdmoaqsl The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2025, Technical data of the baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 h (as of December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Dkjdpsx A U Ncjfx Aaqsl Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: approx. 6.0 t/h - 50 kg/m³: approx. 10.5 t/h - 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant base made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small grain size - Control cabinet air conditioning - Machine stand increased by 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced: • Dismantling of the press ram, disassembly into individual components, servicing of the mechanics, replacement of the following plastic wear rails and plates: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Replacement of steel guide rails left/right at the top of the frame • Replacement of the complete base plate, four-part, made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Replacement of the counter knife, two-part, in the frame • Adjustment of the knife clearance to approx. 2.5 mm • Dismantling of tying and twisting unit, disassembly into individual components, servicing of the mechanics, replacement of all deep groove ball bearings and axial bearings on the twisting shafts, cleaning and adjustment of the wire knives, chains greased and tensioned • Support roller in front of twisting shafts renewed • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for tightness • Hydraulic oil is only one year old, was chemically analyzed, is still in good condition and was therefore not changed, but can continue to be used • General maintenance carried out Finally, the baler was subjected to a machine test in manual and automatic mode, see video for machine function test.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Merek: HSM Tipe: V-press 860 plus Tahun pembuatan: 2012 Tekanan tekan: 532 kN Dkjdpfxey N Rato Aaqjl Tegangan: 400 V Berat bal maksimal: 480 kg (tergantung material) Ukuran bal: 120 x 110 x 85 cm Berat mesin: 2083 kg Dimensi mesin: 180 cm x 125 cm x 298,5 cm Ukuran lubang pengisian: 120 cm x 65 cm Kondisi: sangat baik! Telah dicek fungsinya. Video mesin saat beroperasi tersedia atas permintaan. Layanan FLITS Rental & Sales: setiap mesin dilengkapi dengan satu bundel kawat pengikat (120 kawat). Membutuhkan lebih banyak bundel kawat pengikat? Silakan ajukan permintaan penawaran.