Mesin pembengkok pipa

AMOB CH-80 CN1

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, like-new OPTIMUM OPTIpolish GZ40P polishing machine with variable speed conversion, Siemens inverter, and cyclone extraction. For polishing wheels up to 350mm diameter, max. wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine, high own weight effectively absorbs already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, housing made of cast iron. Additionally included: Variable-speed drive with Siemens Sinamics V20 inverter. Peripheral speeds can be adjusted from 34 m/s down to 6 m/s. Stable base with integrated cyclone extraction system, saving space and soundproofed. The base must be filled with concrete on site by the customer. Automatic start/stop function: When an external device is switched on or off, the extraction system automatically starts or shuts down with a delay of 2–3 seconds. Manual activation or deactivation of the extraction system is no longer necessary: Residual dust is extracted after the machine is switched off, in accordance with hazardous materials regulations. Nlodpeyglkysfx Adiod The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please contact us for further information.

Kondisi: bekas, Tahun pembuatan: 2014, panjang total: 1.500 mm, lebar total: 1.150 mm, tinggi total: 2.400 mm, de-to-hu-it-lt-001 Nsdpfx Adsxapftjield

Tahun pembuatan: 2025, Kondisi: baru, - Plate width 710 mm Nedpeh Ramgjfx Adield - Rear stop - Adjustable stroke

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° Nedpfxsttah Re Adisld → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Table size 520 x 400 mm Strokes 160 strokes/min Nsdpsb U Hwnsfx Adiold Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Kondisi: bekas, Tahun pembuatan: 1999, Pipe diameter up to 60 mm Nlodpfxovvnm Se Adied Machine weight approx. 1.8 t

Kondisi: sangat baik (bekas), Pressure: 50 t Throat depth: 245 mm Njdpfx Adotrhf Ajisld Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table size: 700 x 490 mm Ram surface: 400 x 230 mm Pin hole in ram: 40 mm Pass-through opening in table: 240 x 140 mm Installation height (with max. stroke and ram adjustment at top): 360 mm Total power requirement: 4 kW Machine weight approx. 3.41 t Space requirement approx. 0.8 x 1.75 x 2.1 m The machine was partially refurbished in-house as follows: - Disassembly, cleaning, and inspection - Table surface re-milled - Newly painted in light grey / gentian blue; ram assembly in orange - Shaft crack test performed - Ortlinghaus KBK + auxiliary brake disassembled, cleaned, inspected, seals replaced - Additional air reservoir - New control cabinet with safety controller and touchscreen display - New machine wiring - New Vogel central lubrication system with piping (previously manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam controller - New two-hand control panel - New foot switch - Current UVV safety inspection with brake time measurement - Machine made safe for manual part feeding

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, en_01 Njdpfjx Emqtsx Adield

Kondisi: bekas, Tahun pembuatan: 2006, RASI S80.6L - Mandrel Tube Bending Machine - Curve and mandrel bending of tubes and round profiles - Helical bending of tubes - Incl. tools and documentation - Year of manufacture: 2006 Technical Data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. section modulus: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Bend return speed (programmable): 0 - 9.3 rpm - Bend forward speed (programmable): 0 - 6.6 rpm - Pressure die rail: fixed / following - Tooling: single-, double- or triple-groove - Bending direction: right - Feed rate (stepless): 0 - 60 m/min - Feed force (stepless, adjustable during bending) Nsdpfoyvvk Dsx Adiold - Rotation speed (stepless): 0 - 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. tube clamping force: 8 t - Collet diameter acceptance: 6.5 mm - Bending length: 3 - 6 m - Motor power: 11 kW - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V DC - Machine length: < 7000 mm - Weight: approx. 2500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Pressure: 20.0 t Bending length: 850 mm Distance between uprights: 850 mm Backgauge - adjustable: 375 + 400 mm Ram stroke: 196 mm Installation height: 470 mm Approach speed: 200 mm/sec Table height approx.: 900 mm Total power requirement: 5.0 kW Machine weight approx.: 2,500 kg New price ~ €85,000 Well-maintained / very good condition (!!) With electromechanical direct drive (servo motor + ball screw spindles) Machine operates without hydraulic oil - Checked condition - Machine video - ?v=foxzKIA7vX8 Description: High performance, fast traverse speeds, and excellent ergonomics make this press brake a perfect tool in terms of productivity and precision. This enables unrivaled productivity in the field of small and medium-sized bent parts, as even complex bending sequences at multiple stations can be processed very quickly. A wide variety of different and universally segmented tools allows for an almost unlimited range of applications. Equipment: - Robust machine frame for both standing and seated operation - Deformation-optimized ram - High-dynamic, electromechanical direct drive (servo motor + ball screw spindles) - CNC control via Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes: Y + X + R + Z1 + Z2 - CNC operating unit front right, swiveling - Inductive length measurement system with temperature compensation - Ergonomic machine design - AMADA upper tool clamping system - AMADA lower tool clamping system - 1x brand new universal tool set (complete) - Front safety device (DUAL Laser/Iris Rapid Bend) - Rear safety cover - Side-mounted swing doors - 2x foot switches for both standing and seated operation - Comfort support tables (front) - Operating manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) Njdpjxacifofx Adield * X axis speed .. 250 mm/sec * R axis speed .. 600 mm/sec * Z axis speed .. 1,100 mm/sec * X axis positioning accuracy .. 0.04 mm * R axis positioning accuracy .. 0.06 mm * X axis travel .. 375 + 400 mm * R axis travel .. 180.0 mm