Tekan eksentrik - satu kolom

AMBOLD PEEV 25.4

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08/2000 in Germany. This milling center operates on three axes, with maximum X / Y / Z travels of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D CNC control, connected via LAN cable to an external computer. Additionally, the machine is fitted with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel finder, and a control cabinet air conditioning unit. The spindle reaches a maximum speed of 15,000 rpm. Spindle hours approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of Hermle C 800 V CNC Machining Center: – Travel X / Y / Z axes: 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C800V CNC Machining Center: – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots Gkodoiva Dkspfx Aaxed – Toolholder type: SK40 – Coolant pump through the tool: 40 bar – Control cabinet air conditioning unit – Swivel finder – Chip conveyor Separately available as shown in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 probe, as new

Kondisi: bekas, Tahun pembuatan: 2007, 1 Godpfx Aevgl Rceaxskd

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, kendali jauh kaki, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Gedpfxsvbrqxs Aaxekd Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)

Tahun pembuatan: 2002, Kondisi: baik (bekas), CORSE ASSI X AXIS (longitudinal) (mm) 7,700 Y AXIS (transversal) (mm) 470 Z AXIS (vertical) (mm) 420 A AXIS (spindle rotation) 0° to 180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool holder taper HSK - 63F Automatic tool changer coupling ● Cooling with heat exchanger ● ON-CARRIAGE AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine 8 Maximum number of angle heads insertable in the tool magazine 2 Maximum saw blade diameter insertable in the magazine (mm) Ø = 180 FUNCTIONALITY Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle head unit (side faces, ends) 2 + 2 With saw blade tool (top face, side faces and ends) 1 + 2 + 2 TAPPING CAPACITY With floating chuck M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of clamps 8 Maximum number of clamps 12 Independently motorized clamps ● Maximum number of clamps per zone 6 2021/04/01 w Gksdpfsrupldex Aaxed

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface finishing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency control - Dosing pump Godpfjn Smbrex Aaxekd - Magnetic valve - Basic control panel - Rinsing pipe (various types) The images are for reference only. Optional accessories are available at an additional cost.

Kondisi: baru, Cutting range at 90 degrees: round 255 mm Cutting range at 90 degrees: square 240 mm Cutting range at 90 degrees: rectangular 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 18 - 110 m/min Total power requirement 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Gedefgyh Uopfx Aaxskd SPECIAL OFFER PRICE!!! Double-miter metal band saw, frequency inverter hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° / right 45° • Material height sensor (automatic cutting start recognition) • Frame and gearbox made from a single casting, very quiet operation and extremely low vibration • Hydraulic vice, laterally adjustable • Precision-guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable hydraulic feed pressure • Infeed support roller • Ball-bearing-mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Lower frame in rapid traverse to material or, for serial cuts, start cutting immediately 4. Switch off saw blade 5. Raise frame to just above material 6. Open vice

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Gkodpfjd Nl E Ujx Aaxsd Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Kondisi: sangat baik (bekas), Das System stammt aus dem Jahr 2022. Idealerweise wird die komplette Anlage verkauft, d.h. Stickstoffgenerator mit zwei 500-Liter-Tanks sowie Filtern. Gkodevt Ec Eepfx Aaxed

Kondisi: diremajakan ulang (bekas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Gjdpfx Aefmavxoaxokd Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Required air pressure: 8 bar. More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50), as well as Schaal and Mabu presses.

Kondisi: sangat baik (bekas), We are offering you a Zwick / Roell universal testing machine (tabletop tensile testing machine). Zwick / Roell materials testing machine Model: BDO-FB0.5TH - Load testing in tensile/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Test area width: unlimited - Test area depth: 100 mm - Max travel without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection for operation: COM 1 - Power supply: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used Godpjd Sr S Iefx Aaxokd - Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer further questions by phone.