Kecilkan terowongan

AMTEC POF-L HS (high speed)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. Iaodpfx Ameh Ek Dae Rsu According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Tahun pembuatan: 1989, Kondisi: bekas,

Kondisi: baru, Tahun pembuatan: 2025, Sleeve packer / film banding machine for packaging very large products. Includes shrink tunnel. Automatic product infeed, automatic transfer into the tunnel, and outfeed. - Specifications (depending on actual product dimensions): Power supply: 380V, max. 40kW Compressed air: approx. 6 bar Max. machine cycle rate (no load): 8 cycles/minute Max. product dimensions (mm): W (approx. 1000–1200) x H (approx. 500–600) Machine dimensions (mm): L (approx. 5600–9500) x W (approx. 2000) x H (approx. 2000) Weight (net/gross): approx. 1400–2400 / 1600–2700 kg Iaodpfxsv Nl N Rj Am Rsu Please note that our new equipment prices are often below the typical used machine prices. Feel free to contact us and let us know your specific packaging requirements. - We typically have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Sleeve wrapper / film banderoling machine for packaging large products. Includes shrink tunnel. Fully automatic product infeed, automatic transfer into the tunnel and discharge. - Specifications: Power supply: 380 V, 21.0 kW; compressed air: 0.6 m³, 6.0 bar; max. machine cycle rate (idle): 10 cycles/minute; max. product dimensions (mm): W750 x H300; machine dimensions (mm): L5060 x W1150 x H2000; weight (net/gross): 1200/1400 kg. Iasdpfx Amev Nl N Dj Rju Please note that our new equipment prices are often below the usual prices for used machinery. Feel free to contact us and describe your packaging requirements. – Typically, 30–50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, KALLFASS Folien-Wrapping mit Schrumpftunnel Anlage besteht aus: 1) Kallfass Universa 8060/200 Folien-Wrapping/ -Schweißmaschine 2) Compact 650SO Schrumpftunnel Iaodpfx Amowcnqcj Reu 3) Auslauf Fördersystem (extra) 4) Speicher Vorrichtung für verpackte Pakete (extra) Das zu verpackende Gut wird innerhalb der Inversa in einen Folienhalbschlauch eingeschweißt und anschließend im Compact-Schrumpftunnel eingeschrumpft, dann über ein Fördersystem in eine Paket-Speicheranlage transportiert. Weitere technische Info => Bilder Bitte mailen oder anrufen

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Used machine Manufacturer: Kallfass GmbH Model: Fully Automatic Side Seal Machine Universa 500 Year of manufacture: 2016 Dimensions: approx. 2150 x 1800 x 1550 mm (L x W x H) Weight: approx. 1050 kg Transverse sealing bar: 500 mm Film: Center-folded film, approx. 12 - 80µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 80 mm Pass-through height: 200 mm Iaodpfxoyw Rn Te Am Reu Working height: 780 - 930 mm Power supply: 400 Volt three-phase, 50 Hz with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Fully automatic bagging machine for packaging products—regardless of their length—in full overwrap and without film overlap. Product feed is via a conveyor belt, with simultaneous overwrapping in a center-folded film through a forming shoulder. Product indexing is controlled by a photoelectric sensor. The feed belt is easily adjustable for various product widths. Longitudinal sealing is performed by a continuous side sealing unit. The height position of the forming shoulder and sealing units can be manually adjusted. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Compact 650 S Year of manufacture: 2016 Dimensions: approx. 1850 x 1400 x 1450 mm (L x W x H) Weight: approx. net 580 kg / gross 630 kg Technical data: Tunnel pass-through width: 650 mm Tunnel pass-through height: 200 mm fixed Length of heated tunnel hood: 1200 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in single operation Compact and economical shrink tunnel utilizing the patented ring nozzle heating system with particularly effective air volume regulation. Equipped with an infinitely variable plastic chain conveyor. This tunnel is especially suitable for shrinking small to medium-sized products at medium performance requirements. Offer validity: 30 days, subject to prior sale Functional guarantee, no warranty

Tahun pembuatan: 2025, Kondisi: baru, X-ray inspection system designed for trays, cartons, and large bags. Suitable for detecting foreign objects such as metal, glass, stone, plastic, etc. in food or non-food products. - Specifications: Conveyor belt width: 600 mm; Detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic objects such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; Detector resolution: 0.4 mm; X-ray emission: < 1µSv/h; X-ray beam: horizontal scanning; Conveyor height: 750 ± 30 mm; Conveyor speed (depending on product): 10 – 60 m/min; User interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5 – 35 °C; Ejector system: available as an option according to requirements; Power supply: 220VAC, 50/60Hz; System dimensions: L1800xW1300xH1900 mm; Weight: 580 kg. Ijdpfx Amov Nm Izo Rjau Please note that our new prices are often below the usual used equipment prices. Feel free to contact us and tell us about your packaging application. - From stock, we typically have 30-50 different new machines available for immediate delivery at any time. For customer-specific machines, we offer very short delivery times starting from just 3 weeks. - All machines are available with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, PRO version of the shrink tunnel for processing very large and very wide products in POF film at high speed. - Ideally combined with the AMTEC Shrinker SIDEshrink W60XXXL PRO version. Double air circulation, adjustable airflow, suitable for large products and/or high-speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L(unlimited)xW1100xH230 mm; tunnel size: L2400xW1200xH280 mm; machine dimensions: L2400xW1600xH1260 mm; power consumption: 380V, 28kW. Iedev Nmadspfx Am Rsau Please note that our new prices are often lower than the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock at any time. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Kondisi: bekas, Tahun pembuatan: 1993, filterfläche-121-m²-luftleistung-13200-m³-h-ventilator-15-kw-rie del-absauganlage-mit-zellradschleuse Iaedpfx Aoyk H Uuom Rju

Kondisi: baru, Tahun pembuatan: 2025, The SHRINK tunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35L. High-speed shrink wrapping at 0-20 m/min for POF film (polyolefin). - Specifications: Max. packaging dimensions: W550xH250mm, tunnel size: L1500xW650xH300mm, power supply: 380V, max. 18kW, machine dimensions and weight: L1800xW1140xH1300mm, 700kg. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting at approximately 3 weeks. - All machines are available with a full warranty. Iaodpfxov Nl Tvj Am Rou