Rak kantilever

Kragarmregal doppelseitig Höhe 4.160 mm Tiefe je Seite 1.200 mm / Länge 4.000 mm

Double-sided cantilever rack, used: Hot-dip galvanized bolted system

Scope of delivery:
- 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm
- 24 cantilever arms, 1,200 mm depth, standard
- Including horizontal and diagonal bracing for 1,300 mm axle spacing
- Including fastening material (without floor anchors)

- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts and extensions available at any time)
- (*Also available in larger quantities: 20 uprights in stock)

Detailed description:
- Robust steel construction made from IPE profiles
- Surface of all components hot-dip galvanized
- Load capacity per upright side: 2,250 kg
- Load capacity per cantilever arm: 750 kg
- Cantilever arms height-adjustable in 100 mm increments
- Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep
= 4 storage levels per rack side
- Including horizontal and diagonal bracing for 1,300 mm spacing
- Rack length: 4,000 mm
- Including fastening material (without floor anchors)
- Supplied with assembly instructions and C4 load capacity signage according to DIN standard

- Expert telephone consultation available
- Made in Germany
- Short delivery times
- On-site collection possible

Our cantilever racks are exclusively manufactured in Germany.
We offer reliable shipping with advance notice prior to delivery.
The material is sensibly packed to allow for easy unloading.

Note: When installed outdoors, load capacities must be reduced due to wind and snow loads.
The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits.
Dedpfxoh Ek Dae Ag Uecn

The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended.
According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.