Plat penjepit 6000 x 1650 (4 buah)

ANAYAK FL 6000

Kondisi: bekas, Tahun pembuatan: 1983, Inner diameter min/max: 10 / 250 mm Grinding depth: 400 mm Max. external diameter: 380 mm Swing diameter: 390 mm Max. table travel: 550 mm Min. table stroke: 2 mm Rapid traverse: 10 m/min Infinitely variable table speed: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head: B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Max. swivel angle: +/- 30 degrees Spindle bore: 50 mm Drive power: 2 kW Rapid traverse: 0 - 250 mm/min Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 Gjdpfx Aovprxfoabjua - New control system (July 2015)

Tahun pembuatan: 2013, Kondisi: bekas, Cutting diameter: 420 mm Band saw blade length: 41 x 5600 mm Cut width: 1.3 mm Guodpfsd Izmasx Aabja Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw drive motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw, equipped with round bar magazine and discharge gripper for cutting round bars from 50 to 420 mm. Includes 6 storage compartments, each with a maximum bar weight of 3,400 kg. Cutting lengths: 20 – 1,000 mm. As-new condition, approx. 1,000 operating hours.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Kontrol Heidenhain iTNC 530 Godpoynw Erefx Aaboua Perjalanan sumbu X/Y/Z: 1200 x 900 x 500 mm Kecepatan spindle 16.000 rpm Majalah alat untuk 30 alat + majalah tambahan untuk 57 alat HSK-A 63 IKZ 40 bar Konveyor serbuk Probe pengukur Heidenhain Sistem laser Blum

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 475 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, berat benda kerja (maks.): 200 kg, kecepatan rotasi (maks.): 42.000 rpm, diameter meja: 450 mm, 5-axis Röders Tec RXP800DS --completely overhauled-- The machine is fully refurbished, inspected, and measured at our facility. The machine once again meets new-machine tolerance standards! Gusdovvlmcspfx Aabea Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52 stations Spindle: HSK40E, max. 42,000 rpm Tool measurement laser for tool presetting Handheld control unit Minimum quantity lubrication Prepared for extraction system (e.g. for graphite machining) Spindle compensation Precision package Control system: Röders RMS6, latest version An on-site inspection of the machine in fully operational condition is possible at any time. You are also welcome to visit our website or our Hüttmann YouTube channel to learn more about the type and scope of our refurbished machines.

Kondisi: baik (bekas), Tahun pembuatan: 2016, Abmessungen des Tisches: 3000 x 1700 mm Verfahrwege X/Y/Z: 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase zu Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Gedpfswu Dlasx Aabeua Spindeldrehzahl: 6.000 U/min Werkzeugmagazin: 40 Plätze (ATC) Steuerung: Hurco WinMax 5 Späneförderer

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t Gedjbn Amfepfx Aabjua

Kondisi: bekas, Tahun pembuatan: 2014, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! MAIN TECHNICAL DATA Year of manufacture: 2014 Travel distances: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: qty: 7 Size of T-slots: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. load capacity: kg 11,000 Paint finish: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Max. torque: Nm 935 Speed control: 3-stage (oil-cooled), with automatic switching Feeds: Godoygipaopfx Aabsua X, Y, and Z axis: mm/min 2 – 15,000 Max. rapid traverse: X, Y, and Z axis: mm/min 25,000 Max. feed force: X, Y, and Z axis: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor + 1,280mm) Height approx. (for Z= 1500mm): mm 3,800 Width approx. (for Y= 1200mm): mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & internal coolant supply (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us following a strict selection process and undergo a comprehensive inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are repaired professionally by our expert service team.

Tahun pembuatan: 2022, jam operasional: 108 h, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: SN2120, EDM312MF30-SLM (second-life machine) Technical Specifications: Travel paths: 450x300x300 mm Workpiece clamping table: 820x400 mm Tank size: 900x520 mm Filling height: 300 mm Distance table/electrode holder: 150/450 mm Max. workpiece weight: 800 kg Gujdpfx Aashtrdyobea Max. dielectric fluid volume: 700 l Dimensions (W x D x H): 2700x1800x2350 mm Machine weight: 2500 kg Power supply: 3/N/PE 400/230V 50Hz Power consumption: 6.7 KVA Features: Color: Newly painted light grey + tele grey New control cabinet New APC910/2 control unit (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A Rev.4 generator 5-fold tool changer Touch guard operable by button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma chiller Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling button Automatic tracking lowering tank Chuck: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Guodpfsxwdygex Aaboa Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 55.771 h, jam kerja laser: 35.157 h, daya laser: 3.200 W, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, tebal plat aluminium (maks.): 8 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 150 mm, kecepatan pemposisian: 140 m/menit, akurasi pemposisian: 0,02 mm, tahun perombakan terakhir: 2024, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, Laser dalam kondisi operasional, dapat dilihat dan diuji coba. Secara rutin diservis dan dalam kondisi teknis yang baik. Semua kaca spion telah diganti pada tahun 2024. Guedpfxjv Hxbbo Aabja