Platform kerja

Arbeitskorb V 1500 AB

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, diameter sekrup: 38 mm, This machine is currently in storage at Plastima Used Machinery. Knjdpfx Aajvcqccsbjd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h - 100 kg/m³ approx. 9.7 t/h Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Kjdpfx Aeu Thbxoabsnd Drive power: 4.0 kW Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: bekas, Tahun pembuatan: 2020, ukuran ban depan: 600/70R30, ukuran ban belakang: 650/85R38, Perlengkapan: rem angin bertekanan,

Tahun pembuatan: 2016, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Garis pencucian Film HDPE tahun konstruksi: 2016 0 jam kerja (tidak pernah beroperasi) Knjdpjtuui Dofx Aabod Merek NEUE HERBOLD, D-74889 SINSHEIM terdiri dari: Granulator basah tipe SM 450/600-S5-2 Mesin cuci gesekan tipe FW 560/3000 Sekrup pengangkut Tangki terapung (Pemisahan bak penampung) tipe TB 500 Pengering Mekanis tipe TM 1005 Unit Hisap tipe MFT 55/500 Kontrol listrik

Kondisi: siap digunakan (bekas), Model Baler HSM V-press 1160 plus Tekanan (kN): 532 Ksdera Nyuepfx Aabjnd Kapasitas (bale/jam): 1-2 Ukuran bale maksimum (mm): 1200x1100x1000-1200 Dimensi panjang x lebar x tinggi (mm): 1780x1150x2985 Daya (kW): 7,5 Tahun 2007-2008 harga 5500 eur Tahun 2009-2010 harga 5800 eur Tahun 2011-2013 harga 6300 eur Kami juga memiliki Baler HSM v press 1160 max tahun 2014-2015 Berat (kg): 2300 TAHUN 2017-2018 JUGA TERSEDIA – 7500 eur

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS Kedpfx Aod E A I Ioabend ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, tinggi total: 3.000 mm, lebar total: 2.400 mm, panjang total: 6.000 mm, konsumsi energi: 35 kWh, Perlengkapan: dokumentasi / manual, Vacuum Evaporator – 57,000 L/day | Industrial Wastewater and Process Water Treatment Ksdpfx Aswnbxdjabend General Description The offered vacuum evaporator (57,000 L/day) originates from a project for the treatment of process water and digestate at a biogas producer cooperative in southern France. The system was fully installed but never put into operation. It is in as-new, factory-preserved condition and immediately available. The evaporator is designed as a thermally efficient vacuum system for the reduction of volume, concentration, and recovery of water-containing liquid waste. In combination with downstream reverse osmosis, it is ideally suited for applications where both clean distillate and highly concentrated nutrient or salt solutions are required. Technical Data (Evaporator 57 000) Type Vacuum evaporator, thermally heated Manufacturer Blue Water Plant Year of manufacture 2020 Capacity 57,000 L/day (approx. 2,400 L/h) Operating pressure < 0.2 bar (vacuum operation) Heating medium Hot water / steam Material specification Stainless steel AISI 316 / 304 Control system Siemens S7-1200 PLC with touch panel Energy consumption approx. 45–55 kWh/m³ (depending on feedwater) Condition As new, factory-preserved, unused Applications Biogas and digestate treatment – recovery of nitrogen concentrates Landfill leachate treatment – reduction of wastewater volume Chemical & pharmaceutical industry – process water treatment Food industry – cleaning and reuse of washing and process water ZLD systems (Zero Liquid Discharge) – final stage for concentrate evaporation Advantages High thermal efficiency through vacuum operation Robust stainless-steel construction (AISI 316) for aggressive media Fully automatic control (Siemens S7 + touch HMI) Low maintenance, durable components Ideally combinable with RO systems (double pass integration) Immediately available – optional refurbishment, commissioning & 1-year warranty Special Features Plant was part of a combined system with SIMPEC RO 8000 44 8 Never operated, fully documented and preserved Location: southern France (disassembly & transport can be organized by RIEFILT GmbH) Price & Scope of Supply Price: on request Scope of supply: Evaporator 57 000 + control system + documentation Optional: refurbishment / factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Tahun pembuatan: 2006, jam operasional: 15.000 h, Kondisi: baik (bekas), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250-350 kg/h Knjdpfx Aoumubysabjd Currently, the system is processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February.

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Kedpfx Aaehigmbsbsnd Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 22 kW (29,91 hp), berat keseluruhan: 2.600 kg, Tahun pembuatan: 2006, Cutting unit width: 600 mm Cutting unit length: 1,200 mm Center distance between cutter shafts: 250 mm Cutter shaft speed: approx. 16 rpm Cutter shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Ksdpfx Ajtzbvyoabond Total drive power: 22 kW Weight: 2,600 kg