Garis ekstrusi

Artec 145DV

Tahun pembuatan: 2003, Kondisi: diremaj di bengkel (bekas), Stock No. 2651 Fpsdpoiyyf Ijfx Aagsd 1 used, partially overhauled in 2023, underwater pelletizing system Throughput: up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and knife head, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer, 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200-liter water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available ex stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruder.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW - Adaptor for wide slot die 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / Take-off unit Fodpjrg Ebcofx Aagepd - Control system

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pelletpresse Fodpfxevdrtxe Aagjpd Hersteller – TEKNO UNO Modell – TK 304 Baujahr – 2014 Motorleistung – 50 kW Kapazität – 450 kg/h

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-AT Fpjdpfx Aaevbcbujgjd

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: 7YXXX, VIS G ist die ideale und effizienteste Lösung für die Schrottverarbeitung wie Stanzteile, Abschnitte und Drähte und wird vor allem für die Automobilindustrie, Metallrecycler sowie die Nichteisenmetall-Recycling- und Umschmelzindustrie empfohlen. Fpjdsmqi Akspfx Aaged

Kondisi: siap digunakan (bekas), Mesin bekas Mesin injeksi plastik Produsen: Krauss Maffei Tipe: KM 80 C1 Fsdou Ti Sropfx Aagepd Tahun pembuatan: 2000 Hanya tersisa 1 unit di stok Tanpa waktu pengiriman, siap kirim segera Kunjungan dapat dilakukan dengan janji terlebih dahulu Mesin tidak lagi terhubung ke listrik / Tanpa sambungan air pendingin Mesin disimpan secara profesional Data teknis: Gaya penutup: 800 kN Pelat pemasangan (mm): 610×610 Jarak antar tie-bar (mm): Tinggi pemasangan cetakan (mm): 250 Jarak pelat (mm): 750 Kontrol: MC4 Bahasa tampilan layar: Jerman (tidak dapat diubah) Diameter sekrup unit injeksi (mm): 45 Tekanan injeksi (bar): 1878 Volume langkah (cm³): 275 Daya penggerak pompa (kW): 18,5 Daya pemanas (kW): 13 Isi oli (l): 270 Dimensi (m): 4,3 x 1,4 x 2,1 Bobot total: 3,2 ton Foto tambahan atas permintaan.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. Fpedpfx Ajvf E Aveagod - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Rated power: 77kW, PCU power: 30kW, extruder power: 18.5kW, motor power: 10.7kW, heating zones: 1, heating power: 12kW. Documentation available. An on-site inspection is possible. Fodpswty Hkjfx Aagepd

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas),

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 The equipment is incomplete and is being sold as parts. Defects: - Hydraulic pump missing - Control unit missing Fodpfjur Ravsx Aagjpd - Power supply missing