Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)
Arburg 1200 T 2000-800

Name: Arburg 1200 T 2000-800
Brand: Arburg
Availability: InStock

Tahun pembuatan

2019

Kondisi

Bekas

Lokasi

Trenčianske Stankovce Slovakia

Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562) Arburg 1200 T 2000-800

Data dasar

Nama mesin:: Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)

Pabrikan:: Arburg

Model:: 1200 T 2000-800

Tahun pembuatan:: 2019

Kondisi:: hampir baru (bekas)

Harga & Lokasi

Lokasi penjual:: 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovakia

Hubungi

Rincian penawaran

ID iklan:: A19403861

Nomor referensi:: 250175

Pembaruan:: terakhir pada 30.04.2026

Deskripsi

Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm)

Dcjdpowugczjfx Aavep

Clamping unit 2000T

Table diameter: 1200mm

Angle rotation: 180 degrees

Clamping force: 200 tons

Opening force max. kN/mm: 115/500

Platen daylight max. : 600 mm

Injection unit

Screw diameter: 45 mm

Shot volume: 318 cm3

Shot weight: 291 g

Injection pressure: 2470 bar

1. Model: T model
2. Machine type: 1200 T 2000 - 800
3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant
4. Screw: Reinforced screw coupling for splined coupling geometry
5. Control system: SELOGICA ‘direct’ controller
6. Technology stage: Stage 2 servo-regulated with 2 control pumps
7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating
8. Nozzle: Open nozzle 45 mm with nozzle tip
9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2
10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating
11. Clamping platen: Mould mounting platen set, central diameter 125 mm
12. Blow unit: Mould blow unit with pressure reducer at station 1
13. Safety: Optical barrier at loading station, continuous oil cooling and filtration
14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper
15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1)
16. Electric axes: Basic equipment for electric axes control
17. I/O: 4 programmable inputs/outputs on terminal rail
18. Sockets: Additional socket combination (1 CEE, 1 Schuko)
19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation
20. Acoustic alarm: Error alarm acoustic signal
21. Safety interlock: Interface for safety interlock of door (EUROMAP 73)
22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold
23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter
24. Manual & labels: CD operating manual & spare parts list, Slovak language labels
25. Machine feet: Anti-vibration footplates
26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme
27. Display languages: IT/EN/SK

Dokumen

19403861-01.pdf

Penyedia

Terdaftar sejak: 2018

182 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+421 32/3... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin cetak injeksi Allrounder 520 C 2000 Arburg Allrounder 520 C 2000-675

Weil der Stadt

11.183 km

Mesin cetak injeksi Allrounder 520 C 2000
ArburgAllrounder 520 C 2000-675

€8.199

EXW Harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 95.239 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 173937, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, tinggi cetakan (min.): 250 mm, panjang total: 5.100 mm, lebar total: 1.800 mm, tinggi total: 2.200 mm, berat keseluruhan: 6.630 kg, Perlengkapan: dokumentasi / manual, The machine was running perfectly until the very last day before the new machine was delivered. Dcodpfov D Nxlox Aavsp Therefore, the machine is in good used condition. Due to a lack of space in the injection molding area, the machine is being sold and is no longer connected to power. Pump / injection unit / clamping unit are leak-free. Machine manual is available. Videos of the machine are available. Operating hours pump: 95,239 Operating hours automatic: 86,082 Repairs carried out in recent years: - Filter replaced annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed incl. new piston

Lihat detail

Iklan kecil

Mesin cetak injeksi Arburg ALLROUNDER CENTEX 320C 500-250 VO

Deutschland

11.023 km

Mesin cetak injeksi
ArburgALLROUNDER CENTEX 320C 500-250 VO

Hubungi

Iklan kecil

Printer 3D OR Laser Orlas Creator 3D-Metall Drucker

Emmelshausen

11.245 km

Printer 3D
OR LaserOrlas Creator 3D-Metall Drucker

Hubungi

Kondisi: bekas, Tahun pembuatan: 2018, 3D printer Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-Theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Dcsdevtftqjpfx Aavjp Coater: Rotationally guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Lihat detail

Iklan kecil

Mesin cetak injeksi Arburg Allrounder 470S 1300-350

Cantabria

12.280 km

Mesin cetak injeksi
ArburgAllrounder 470S 1300-350

Hubungi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Arburg injection moulding machine, year 2000. 130 tonnes clamping force. The machine is delivered fully refurbished at our facilities in Heras (Cantabria). New seals in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660x840 mm Dcjdpfsrxtpdex Aavsp OPENING STROKE: 575 mm MAX. DISTANCE BETWEEN PLATENS: 800/850 mm TIE BAR DISTANCE: 420x420 / 470x470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Lihat detail

Iklan kecil

Pusat pemesinan CNC 5-sumbu HMC, pusat penggilingan, pusat pemesinan dengan kontrol CNC SIEMENS 840D LICON Liflex 1266 PC B1

Hessisch Lichtenau

11.072 km

Pusat pemesinan CNC 5-sumbu HMC, pusat penggilingan, pusat pemesinan dengan kontrol CNC SIEMENS 840D
LICONLiflex 1266 PC B1

€165.000

Harga tetap ditambah PPN

Hubungi

Kondisi: bekas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned: 2017 Equipped with CNC path control SIEMENS 840D SL (Solution Line) with 5 simultaneously controlled axes Traverse paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/– 135° (270°) B-axis 360° infinite Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7,500 N Feed force Z-axis 10,000 N Positioning tolerance (X/Y/Z) 0.008 mm Swivel speed A-axis 180° rotation in 4 sec. Interference circle diameter in the swiveling bridge max. 1400 mm Transport load in the swiveling bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle output 37 kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent pockets occupied Ø 140 mm Dcjdpfxjt Ac Efo Aavep Tool diameter with adjacent pockets empty Ø 250 mm Tool length max. 400 mm Tool weight max. 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Pneumatic connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37 kW/40% duty cycle) with liquid cooling and recooling device - 2-axis rotary tilting table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary axis’s table - Double pallet changer, without pallets (new pallets must be procured) - Media transfer with 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, as disc turret - Machine designed for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper-belt chip conveyor, ejection height 1,150 mm - Licon ECO-Mode (energy-efficient operation of aggregates) - Direct position measuring system in all axes - Logged operating hours with control voltage on = approx. 7,500 h Space requirement for operation L x W x H 9,000 x 5,000 x 3,800 mm Space requirement for transport L x W x H 6,100 x 4,400 x 3,600 mm Basic machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Lihat detail

Iklan kecil

Arburg 570 S 2200-800/290 Arburg 570 S 2200-800/290

Rumania

11.248 km

Arburg 570 S 2200-800/290
Arburg570 S 2200-800/290

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, gaya penjepit: 2.200 kN, diameter sekrup: 70 mm, berat injeksi: 172 g, Arburg 570 S 2200-800/290 ini diproduksi pada tahun 2020. Mesin ini dilengkapi dengan sistem penggerak hidrolik dan kontrol Selogica untuk pengoperasian yang presisi. Dengan gaya clamping 2.200 kN dan diameter sekrup 40 mm, mesin ini sangat ideal untuk tugas injection molding yang detail. Manfaatkan kesempatan ini untuk membeli mesin injection molding hidrolik Arburg 570 S 2200-800/290. Hubungi kami untuk informasi lebih lanjut. Unit Pengunci • Jarak antara tie bar: 570 × 570 mm • Stroke pembukaan: 650 mm • Gaya ejektor: 70 kN • Stroke ejektor: 200 mm Unit Injeksi • Ukuran unit injeksi: 290 • Tekanan injeksi: 2.500 bar • Volume shot: 188 cm³ Dcsdpex Nkp Ijfx Aavep Penggerak & Kontrol • Sistem penggerak: Hidrolik • Kontrol: ARBURG Selogica

Lihat detail

Iklan kecil

Pompa vakum Busch PANDA WV 2400 A + COBRA NC 0630 C

Forst (Lausitz)

10.727 km

Pompa vakum
BuschPANDA WV 2400 A + COBRA NC 0630 C

Hubungi

Iklan kecil

Jerman

10.886 km

Gergaji lengan radial
ELURAS 1253

Hubungi

Kondisi: bekas, Tahun pembuatan: 1993, Technical details: Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting depth: 68 mm Cutting length: 450 mm Total power requirement: 2.55 kW Machine weight approx.: 150 kg Dimensions (L x W x H): 0.85 x 0.86 x 1.4 m This circular saw is manually operated, fitted with a table support measuring 400 x 860 x 22 mm, adjustable, and mounted on a frame. Application: Wood, duroplastics, gypsum, chipboard and various similar materials Specifications for pivot arm: Length 800 mm, max. reach 580 mm, swivels 45° to the right/left, indicated via radial scale Specifications for saw frame: Dsdpsu Nifyefx Aavjcp Manual feed (handle), tiltable 90° to the left, indicated via radial scale, motor 380V with 2,700 rpm, protection class IP44,

Lihat detail

Iklan kecil

Radviliškis

10.116 km

Ekstruder LSAM
CEADS25 Extruder

Hubungi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EX-006-S25, Tahun pembuatan: 2022, jam operasional: 20 h, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, arus masuk: 32 A, sambungan udara terkompresi: 10 batang, frekuensi input: 60 Hz, daya: 9 kW (12,24 hp), Kami menawarkan CEAD S25 LSAM Extruder baru, tahun pembuatan 2022. Model: S25 Extruder Nomor seri: EX-006-S25 Fase input: 3 fase Tegangan input: 400 V Frekuensi input: 50-60 Hz Arus input: 32 A Dodoy Nk S Nspfx Aavecp Daya: 9 kW Rating arus hubung singkat: 10 kA Tekanan udara: 6-10 bar Tekanan udara: 87-145 psi Rekomendasi RCD: 30 mW Pengering dan feeder pellet sudah termasuk. Termasuk hampir 2 ton pellet Airtech Dahltram® C-250CF + senyawa pembersih. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Lihat detail

Iklan kecil

DN SOLUTIONS LYNX 2100LMSA DN SOLUTIONS LYNX 2100LMSA

Hungaria

11.248 km

DN SOLUTIONS LYNX 2100LMSA
DN SOLUTIONSLYNX 2100LMSA

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 560 mm, daya motor spindle: 15.000 W, tinggi total: 1.693 mm, lebar total: 1.595 mm, berat keseluruhan: 3.600 kg, produsen pengendali: FANUC, model controller: 0i PLUS, panjang produk (maks.): 2.805 mm, jumlah sumbu: 3, This 3-axis DN Solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine is equipped with a 6-inch chuck, a 12/24-position turret, and a sub-spindle for expanded capabilities. If you are looking for a high-quality lathe, consider the DN Solutions LYNX 2100LMSA horizontal turning center that we have for sale. Please contact us for further details. • Condition: New, 0 operating hours • CNC control: FANUC 0i PLUS with 15" touchscreen Capacity: • Chuck size: 6 inches • Max. turning diameter: 300 mm • Max. turning length: 510 mm Axes / Travels • X-axis rapid traverse: 30 m/min • Z-axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: spindle positioning for milling and drilling operations Main spindle • Max. spindle torque: 127 Nm Sub-spindle: • Sub-spindle: yes • Max. sub-spindle speed: 6,000 rpm Turret: • Number of turret stations: 12 / 24 • Driven tool speed: 6,000 rpm Integrated options • Automatic tool changer • High-pressure coolant system: 7 bar Additional equipment Dcsdpsy Ex A Ujfx Aavop • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor belt Technical Specification Counter Spindle: Yes Driven Tools: Yes

Lihat detail

Beriklan di sini