Arburg 320 C 500-100 - PENURUNAN HARGA!

Arburg 320 C 500-100

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Arburg 320C 500-100 / Excellent Technical Condition Year of manufacture: 10.2004 Injection Unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2000 bar Dosage volume: 49 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional Equipment: The machine is in excellent technical condition and was used for testing injection molds. Operating hours: 25,739 h in automatic mode Total operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units – bimetallic Proportional valve on injection unit – precise injection Integrated system for quality pressure control by Sensor Kistler – mold pressure measurement The screw diameter can be changed to smaller or larger: 20 mm or 30 mm Dimensions: Weight: 2,300 kg Length/Width/Height: 3.18 x 1.47 x 1.99 m Drive: Pump/Motor: 15 kW Hodpfx Aszc Nifsa Dsfi Heating capacity: 4.9 kW Total power: 19.9 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 80/45 Tech Clamp force: 45 tons, tie-bar-less Hsdeh Rawbjpfx Aa Dsfi Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke: 350 mm Hfedpju Dmgqofx Aa Dsi Mould height: 200 mm Tie bar spacing (vertical): 320 mm Tie bar spacing (horizontal): 320 mm Mould mounting plates: 446x446 mm Injection pressure: 2240 bar Injection flow rate: 124 cm³ Ejector stroke: 125 mm Ejector force: 30 kN Net weight: 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader Machine tested English language

Kondisi: baik (bekas), Tahun pembuatan: 2002, We are selling this machine, available immediately. For further details, please refer to the images. Hfjdoyym Rpjpfx Aa Doi

Kondisi: baik (bekas), Magnetic table 455 x 170 mm Digital display Water tank Dressing device Wet grinding unit Hfedpfx Aetu Il Tsa Dei

Kondisi: bekas, Tahun pembuatan: 2002, jam operasional: 121.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 500 kN, diameter sekrup: 20 mm, For sale is an injection moulding machine by Arburg, model 320 C 500-100. The machine is in good condition and fully functional after installation. Technical data: Year of manufacture: 2002 Pump hours: 121,000 h Clamping force: 500 kN Ejector force: 35 kN Tie bar distance: 550 mm Clear tie bar spacing: 320x320 mm Hedpfswqnhwex Aa Defi Platen dimensions: 446x446 mm Screw diameter: 20 mm Calculated shot volume: 31 cm³ Transport and loading can be organised at extra cost upon request, Europe-wide. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Hedpfx Aajk Rnq Ns Djfi Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Kondisi: bekas, Grinding length: 1000 mm Grinding width: 300 mm Workpiece height: 230 mm Table clamping surface: 1000 x 240 mm X-axis travel: 1000 mm Hfodsu Dn Txepfx Aa Dei Y-axis travel: 270 mm Z-axis travel: 350 mm Grinding wheel diameter: 240 mm Grinding spindle speed: 2,180 rpm Table speed, infinitely variable: 3 – 30 m/min Total power requirement: 4.5 kW Machine weight approx.: 2.8 t Machine dimensions (L x W x H): 2.36 x 1.37 x 2.0 m Accessories: Magnetic chuck 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding device

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Kép panjang penggerindaan 800 mm Kép lebar penggerindaan 375 mm Ketinggian benda kerja 375 mm Pelat jepit magnetik elektrik 900 x 300 mm Kecepatan putar spindle 1500 - 3000 rpm Luas meja jepit 1550 x 370 mm Perjalanan memanjang meja 100 - 1000 mm Hsdpfjunt Iuex Aa Dofi Berat maksimum benda kerja 350 kg Ukuran batu gerinda 300 x 50 mm Kebutuhan daya total 9 kW Berat mesin sekitar 4,6 t Kebutuhan ruang sekitar 4,0 x 2,3 x 2,6 m Perangkat penggerindaan basah, pengaturan vertikal otomatis. Dapat dialihkan antara penggerindaan celah dan penggerindaan bidang. Perangkat pendresan lurus elektrik Pelat magnetik elektrik 900 x 300

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC) Hodpeuggb Dofx Aa Djfi  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.