Mesin cetak injeksi

Arburg 320S 350-60 Nr. 182833

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The unit enables dosing and mixing of up to 4 granular components. Actual, measured, and weighed quantities are continuously compared with set values using a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: - 2 feeding hoppers for virgin material or regranulate/virgin material - 2 feeding hoppers for premixes or additives - 2 pneumatically controlled conical dosing heads - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters Njdswm Ii Tjpfx Adiecw - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, allowing recipe, regrind, and process data management, vibration compensation, and continuous self-optimization; built-in Ethernet port and standard reporting/printing functions Technical specifications: Average throughput: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, oil and water free Weight: approx. 60 kg ✅ Material loaders from Piovan, as shown in the photos, are included in the sale.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g Ncodetrya Ropfx Adisw - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: bekas, Tahun pembuatan: 1991, nomor mesin/kendaraan: 19085, Folding Machine – Stahl T50/4-4-SAK66 Year of manufacture: 1991 Nodsh Axvcepfx Adiscw Serial no.: 44429/91-184041 Minimum folding size: 100 x 150 mm Maximum folding size: 500 x 820 mm Folding configuration: - 1st unit with 4 buckles, folding width 500 mm - 2nd unit with 4 buckles, folding width 500 mm Maximum pile height: 690 mm With stream delivery SAK 66 Compressor included Counter – Control PCS 100 Manuals included Online video inspection via Skype available We would be pleased to welcome you for an on-site visit – further machines in stock. Immediately available – ready for inspection In stock at Emskirchen / Nuremberg – test runs possible.

Kondisi: bekas, nomor mesin/kendaraan: 78261, Faltmaschine MB multipli-cas 524 Serien-Nr. 78261 Online-Video-Inspektion per Skype-Video Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Nodpfxeh Axynj Adijcw Lagerort: Emskirchen / Nürnberg – Test vor Ort möglich

Kondisi: bekas, Tahun pembuatan: 2019, daya: 30 kW (40,79 hp), laju aliran volumetrik: 4,95 m³/jam, tekanan (maks.): 12,75 batang, Kompresor Udara Atlas Copco AQ30VSD FF Pabrikan: Atlas Copco Tipe: AQ30VSD FF Tahun Pembuatan: 2019 Tempat Pembuatan: Belgia Tekanan Maksimal: 12,75 bar Daya: 30 kW Kapasitas Aliran: 4,95 m³/menit Laju Aliran: 82,5 l/detik, 174,8 cfm, 4,95 m³/menit Daya Motor: 40 HP Kecepatan Motor: 8600 rpm Berat: 702 kg Catu Daya: 400 V, 50 Hz, 3 phase Desain: Tanpa oli Kelas ISO: 8573-1 Class 0 Sistem Kontrol: Elektronikon Graphic Perlengkapan: SMARTLINK Ncjdpfjxk U Arex Adiew Asal: Buatan Belgia Tidak ada jaminan atas keakuratan, kelengkapan, dan aktualitas informasi yang diberikan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 120 mm, jarak perjalanan sumbu W: 450 mm, For sale: Hauser S35-400 Coordinate Grinding Machine The machine is in excellent condition and was partially overhauled in 2024 for €15,000. It comes equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL SPECIFICATIONS Distance between upright and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 120 mm W-axis travel: 450 mm U-axis travel: 5.5 mm Taper grinding: max. 16° Table size: 600 x 380 mm T-slots: 6 pcs, 10 mm width, 50 mm pitch Table load: 300 kg Ncedpfx Adswtqthoiew Speed & Tool Interface Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rate X/Y: 0 - 1,200 mm/min Feed rate W-axis: 900 mm/min Feed rate Z-axis: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Operating pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Connection rating: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Tilting table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included On request, transport and loading can be organized Europe-wide at additional cost. All prices plus VAT. Viewing by appointment possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Arburg Allrounder 420C 1000-350/150 Arburg Two-component injection moulding machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can also offer on-site commissioning to guarantee functionality. Extras include: Rotary platen, Geiger Robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR Vertical / 2120 BAR Horizontal INJECTION VOLUME: Horizontal 182cm³ INJECTION VOLUME: Vertical 54cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOLD HEIGHT: 250 mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002 Njdpfx Aop Audqsdijcw

Kondisi: baik (bekas), Tahun pembuatan: 1998, Battenfeld 600/200 CDC Unlocking force: 4000 kN Clamping force: 60 tons Ncsdpfsg Emvhjx Adisw Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Aluminum angle conveyor belt incl. mobile underframe Horizontal section: 1,100 mm Inclined section: 1,500 mm Incline angle at bend: 60° Total conveyor length: 1,750 mm Discharge height: approx. 1,600 mm Nodpei Igikefx Adiscw Height of horizontal section (infeed height): 300 mm Conveyor belt width: 500 mm PU conveyor belt incl. carriers and corrugated edge, petrol matt Drive: 0.25 kW motor, speed 0.2 m/sec Power: 220/240V, 50Hz, protection class IP54 Drive ready for connection, motor control optional 4x swivel castors with parking brake 2 pcs. corrugated side walls, 50x35 mm 11 pcs. T-50 cleats, centrally welded, 481 mm pitch 2-ply, particularly cross-stable Usable width: 290 mm, composed as follows: Transverse arrangement -70+30-5+290-5+30-70 mm

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Max. clamping force: 500 kN, opening stroke: 350 mm, mold installation height: 200 mm, heating capacity: 6.5 kW, screw diameter: 40 mm, weight: 2.33 t, no documentation available. Ncodpfx Aoilhfcsdiow