Arburg 520S 1300-400 (2015)

Arburg 520S 1300-400

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 13.450 mm, lebar total: 4.135 mm, panjang total: 3.092 mm, kapasitas muatan per bagian penyimpanan: 400 kg, tegangan masuk: 400 V, kapasitas angkut: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load Capacity per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays approx.: 91 pieces Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid as long as the system is unsold. Technical specifications per Logimat: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity approx.: 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight (without trays): 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by e-mail. Price: special export price Price: excl. VAT Lead time: in stock We have 3 pieces of Schäfer Logimat in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from brands including Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Predjru A Atspfx Ab Iod Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Podpfx Abeu Atmus Isrd Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 56.000 h, Dijual: Mesin injeksi Arburg 570-2000-800 tahun 2008. Dalam kondisi teknis dan visual yang sangat baik, bekerja sangat halus tanpa kebocoran oli. Kontrol Selogic. Unit injeksi bimetal diameter 45 mm. 1 x udara, 2 x inti hidrolik, keluaran robot. Mesin dijual tanpa feeder material dan pewarna. Prjdsukirbopfx Ab Iod

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Prodpfstyyn Hsx Ab Ied Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT CNC 8-SUMBU DENGAN KEPALA MILLING, KEPALA TURRET BAWAH, DAN COUNTER SPINDLE DIAMETER PUTAR MAKSIMAL: 660 mm PANJANG PEMBUBUTAN MAKSIMAL: 1495 mm DIAMETER PEMBUBUTAN MAKSIMAL: 660 mm KAPASITAS BATANG: 65 - 65 mm SPINDLE: 35–5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35–5000 rpm; 18,5 kW; 254 mm KEPALA: CAPTO C6; -30°+195°; 15–12.000 rpm; 18,5 kW JARAK GERAK SUMBU X: 580 mm JARAK GERAK SUMBU X2: 150 mm JARAK GERAK SUMBU Y: 160 mm JARAK GERAK SUMBU Z: 1545 mm JARAK GERAK SUMBU Z2: 1490 mm JARAK GERAK SUMBU B: 1550 mm PERGERAKAN CEPAT X-Y-Z: 38 - 26 - 38 m/menit KEPALA TURRET BAWAH: 9 POSISI MAJELAS ALAT: TIPE RANTAI; 80 POSISI COOLANT TEKANAN TINGGI: 18 Bar UNIT KONTROL: MAZATROL MATRIX Pjdpfx Aew Ey R Hob Iord BERAT: 11.800 kg DIMENSI TOTAL: 5.090 x 3.270 x 2.830 mm AKSESORIS: KONVEYOR SERPIHAN; FILTER KERTAS; SETTER ALAT

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 100 mm, diameter roda gerinda: 350 mm, berat benda kerja di antara senter: 20.000 g, jarak antara pusat: 400 mm, jenis arus masuk: tiga fasa, lebar roda gerinda: 30 mm, kecepatan spindel (maks.): 1.200 rpm, kecepatan spindel (min.): 30 rpm, panjang umpan sumbu Z: 420 mm, daya motor spindle penggiling: 3.000 W, berat keseluruhan: 1.600 kg, tahun perombakan terakhir: 2025, tegangan masuk: 400 V, de-DE Psdpswt Tgwjfx Ab Iord

Kondisi: sangat baik (bekas), Heidenhain digital readout.\nFehlmann cross table: KS 255.\nAccessories: available.\nWorking area:\nQuill travel Z-axis\t110 mm\nMachine head travel\t450 mm\nTable to spindle nose\t0 – 527 mm\nQuick-change systems\tSF 32\nWork spindle\t2.9 kW\nInfinitely variable speed range\t50 - 6300 rpm\nClamping surface\t255 x 550 mm\nDimensions and weight:\nRequired space (W x D x H)\t1.5 m x 1.35 m x 2.1 m\nWeight approx.\t850 kg Prjdpfxsvbzlrs Ab Iod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Used straightening press in very good condition for sale. Pedoufhzvjpfx Ab Isrd This universal and robust Stierli straightening press is equipped with a 5m straightening beam, allowing processing of beams up to HEA-600 and HEB-600 (at S-235). The machine operates using the reliable Stierli stroke fine adjustment control system, which makes it very user-friendly and enables fast, precise straightening and bending. Additional options can be added upon request, such as a powered roller conveyor, NC control, laser measurement, and more. (Note: The photo does not show the actual machine.)

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle power: 52 kW / 430 Nm Total power requirement: 87 kVA Approx. machine weight: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, Internal coolant supply (IKZ) 40 bar, Prepared for Renishaw MP 10 infrared probe (probe not included), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Compressed air through spindle center, Pedpepumdcjfx Ab Ijrd Electric oil mist extraction, Electronic handwheel, TRANSMIT function, High-precision package, BA 4, Laminated safety glass panel on the right door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, stacker crane, central controller, and 10 pallets Approx. 98,500 operating hours (main switch ON) Approx. 45,500 spindle hours

Tahun pembuatan: 2017, Kondisi: hampir baru (bekas), Lini produksi pembuatan kapsul kopi NESPRESSO Terdiri dari komponen-komponen berikut: Pedpfx Abew Nriue Ijrd Pos. 01) Cetakan injeksi untuk kapsul, produsen: FOSTAG AG 1,0 unit cetakan dengan 16 rongga 1,0 unit cetakan dengan 32 rongga Pos. 02) Mesin cetak injeksi dua komponen, Produsen: ARBURG, Tipe: 720A3200-800, Tahun pembuatan: 2017 Pos. 03) Sistem pengambilan kapsul 16 rongga, produsen: Beck, tahun pembuatan: 2019 Pos. 03) Sistem pengambilan IML untuk kapsul 32 rongga, produsen: Beck, tahun pembuatan: 2019