Arburg ALLROUNDER 270 S 400-100

Arburg ALLROUNDER 270 S 400-100

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, 1 unit used two-component injection molding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tons Tie bar spacing: 720 x 720 mm Minimum/maximum mold height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Nwsdpfxev S E Dge Abwjh Injection weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Injection weight in PS: 31 g Control system: Selogica Please request technical specifications.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.700 mm, daya pengelasan (maks.): 600 kVA, Diameter kawat (maks.): 6 mm, jenis arus masuk: tiga fasa, MG950 Lebar kisi-kisi (panjang kawat melintang) untuk pemasukan bawah, 1 jalur: 200 – 900 mm untuk pemasukan atas, 1 jalur: 200 – 1700 mm untuk pemasukan atas, 2 jalur (lebar efektif) maks. 1530 mm Panjang kisi-kisi maks. 3200 mm min. 350* mm Jarak antar kawat memanjang terluar maks. 1600 mm Pitch kawat memanjang min. 20 mm Pitch kawat melintang min. 10 mm dapat diprogram tanpa tahapan Jarak bebas kawat memanjang min. 15 mm Jarak bebas kawat melintang min. 8 mm Diameter kawat memanjang 2,0 – 6,0 mm Diameter kawat melintang untuk pemasukan bawah 1,5 – 4,0 mm untuk pemasukan atas 2,0 – 6,0 mm Kelebihan kawat memanjang maks. 300 mm min. 10 mm Kelebihan kawat melintang maks. 300 mm min. 5 mm Jumlah kelompok pengelasan individu ESG 12 Nwsdpfx Asym An Aobwjh Jumlah kelompok pengelasan portal PSG18 12 Jumlah kawat memanjang maks. 12

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Arburg 320 C 500-170 (2014) Nsdpfxsxqdtae Abwowh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 800 kg, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel paths: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Max. taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged wire-cut EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. Automatic Wire Changer AWC (utilizes 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be fully cleaned, overhauled, and extensively tested following order intake. Axis laser measurement is carried out at our facility. We are also happy to perform a custom test on the CUT 3000 for you. Operator training at Techma on your overhauled machine is included. Nodeych Rzopfx Abwowh Optional extras available upon request: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Kondisi: bekas, Tahun pembuatan: 2000, nomor mesin/kendaraan: SO117, Used HDPE 4+4 Blow Moulding Machine TECHNE SYSTEM up to 2700 bph This HDPE blow moulding machine features a highly specialised system for producing containers made from high-density polyethylene (HDPE). The machine processes bottle formats up to 2 litres and achieves a production capacity of up to 2,700 bottles per hour (bph). Furthermore, the system features a 4+4 configuration, i.e. four upper and four lower cavities, which ensures optimised output through a symmetrical and highly efficient design. This machine will be available from mid-October. Main technical specifications of the TECHNE SYSTEM HDPE blow moulding machine: To ensure high precision in bottle formation, the blow moulding system offers a cavity spacing of 150 mm. Additionally, the machine is equipped with a double carriage, which optimally controls the production cycle and minimises downtime. In particular, this blow moulding machine can process containers up to 2 litres, providing high flexibility for the production of various packaging types. Mould configuration and flexibility: Although the machine does not include any moulds as standard, it supports a wide range of mould sizes up to a maximum capacity of 2 litres. Moreover, the entire system can be easily adapted to specific production requirements. Additional accessories or necessary modifications can be provided upon request and are offered separately. Additionally, our technicians, who handle the dismantling, can also take care of the reinstallation of the machine, ensuring reliability and operational continuity. Nwjdpfxjvgvkaj Abweh Manuals and technical documentation: This blow moulding machine comes with complete technical manuals and detailed wiring diagrams, supporting installation, maintenance, and daily operation. The documentation includes detailed specifications on container tolerances as well as technical diagrams of all system components. This allows for the optimisation of critical parameters such as bottle spacing and the distance between extruders and container bodies. Production and output: This used blow moulding machine supports a production capacity of 2,400 to 2,700 bottles per hour, depending on operating conditions and container type, thus maintaining a consistent production rate. Regarding precision, the carriage stroke extends to 660 mm, allowing optimal calibration...

Tahun pembuatan: 2012, Kondisi: baik (bekas), Robot 40 RC 200 X = 700mm, Y = tandem 1600mm, Z = 3320mm, B + C servo axes Year of manufacture: 2012 Price: €8,900 Contact: Mr. Rainer Eckerle Nwsdpfx Abegkvtxjwsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 650W500V/200HL. 2F 2-component machine  Tie-barless design Njdpfxjgrafvs Abwswh  2000 kN clamping force  Screw diameter unit 1: 45 mm, unit 2: 45 mm  Max. shot volume unit 1: 226 cm³, unit 2: 183 cm³  Mold installation height: min. 250 mm, max. 750 mm  Year of manufacture: 1998

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), 6434249 Nwsdsx E Ac Ejpfx Abwoh

Kondisi: bekas, Tahun pembuatan: 2001, jam operasional: 58.764 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 502748, gaya penjepit: 1.000 kN, diameter sekrup: 30 mm, jarak antara tiang: 420 mm, volume langkah: 144 cm³, tekanan injeksi: 1,905 batang, gaya ejektor: 41 N, lintasan ejektor: 150 mm, langkah pembukaan: 500 mm, panjang pelat: 590 mm, lebar pelat: 590 mm, tinggi pemasangan: 250 mm, panjang total: 4.550 mm, lebar total: 1.450 mm, tinggi total: 2.000 mm, berat keseluruhan: 4.800 kg, kapasitas pemanasan: 9 kW (12,24 hp), daya pompa: 30.000 W, jenis penyesuaian ketinggian: hidrolik, panjang langkah: 150 mm, tinggi alat: 250 mm, berat alat: 700.000 g, Perlengkapan: dokumentasi / manual, Demag ERGOtech injection molding machine ERGOtech 100-420-200 NC4, year of manufacture 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection molding machine is in good condition and ready for operation. For sale is the injection molding machine ERGOtech 100-420-200 NC4. Optionally, all associated Wittmann peripheral devices can be included at an additional cost. We acquired the Demag ERGOtech as part of our facility expansion in 2020 for a customer order and equipped it with the relevant Wittmann peripherals. The machine was serviced on site by a DEMAG service technician and is free from defects. OPTIONALLY, all associated Wittmann peripheral equipment can be sold: Wittmann Battenfeld Peripheral Equipment (Germany): • Wittmann Tempro Plus D160 – Dual circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMO DEVICE – used, no defects Equipped with: – 2 pcs. reinforced pump TemproPlus D160-1.0kW (2.4A) 60l – 1 pc. flow measurement – ultrasonic 140–180°C – 1 pc. digital interface 20mA – 1 pc. packaging for temperature control unit Original price: €6,980.00 Sale: €3,490.00 • Wittmann compact chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMO DEVICE – used, no defects Original price: €4,750.00 Sale: €2,375.00 • Wittmann Battenfeld Germany Drying and dosing accessories – 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granulate – 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granulates, hinged lid with integrated collector motor – 1 pc. HOPPER: MT203 machine hopper 203 for setting up a separator from the 200 series Nwedpfx Aotltvzjbwjh – 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulates Condition – NEW – Unused Original price: €8,467.00 Sale: €4,233.50 All prices are exclusive of the legal VAT of 19%. ATTENTION: The offer does not include relocation or transportation costs for the machine. These can be additionally offered and organized as a service upon request. For further questions, please feel free to contact me personally at any time.

Kondisi: baik (bekas), Tahun pembuatan: 2010, AWEA 1250, Nwsdpfoxu Ew Uox Abwoh 15.000 rpm pendingin melalui spindle, Penukar alat dengan 40 posisi Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Ragum mesin dan pelat di atas meja tidak termasuk dalam mesin.