520C-200-675

ARBURG

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 64.300 h, gaya penjepit: 3.200 kN, diameter sekrup: 60 mm, berat injeksi: 723 g, tinggi total: 2.400 mm, berat keseluruhan: 17.700 kg, This hydraulic injection molding machine was manufactured in 2004. It features a screw diameter of 60mm and can process a maximum shot weight of 723g. The machine offers a clamping force of 3200 kN with a maximum opening stroke of 700mm. It is equipped with special features such as 2x AS core pull and 6x DS hot runner control zones. The Arburg Allrounder Selecta 720 S 3200-2100 we are offering for sale is ideal for demanding performance in a production environment. Please contact us for further information. Additional Equipment • The Wittmann robot is not included • Conveyor belt is included, safety enclosure covers only the electrical components • Other peripheral devices are not included Machine Advantages Qualitative Machine Advantages • Condition: used, pump overhauled Technical Machine Advantages • Known issues: the water computer and water batteries should be overhauled (no impact on functionality) Nsdex D N Sbjpfx Ahwsku • Machine is offered without handling system and peripheral equipment Additional Information Machine is still under power Dimensions Machine depth: 7200 mm

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 106.864 h, gaya penjepit: 1.300 kN, diameter sekrup: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on schedule. Good condition, fully functional Still in operation until week 11 Additional service reports and documentation available Technical data: Year of manufacture: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve on the injection unit for especially high dynamics and reproducibility of the injection process, back pressure is regulated, the nozzle contact force is manually adjustable Nksdpfx Asrp Dyrshwsu - VE 557/00 AES Energy-saving system for automatic power optimization and corresponding energy reduction through stepless adjustment of the pump drive speed to match the respective power requirements of the injection cycle - VE 460/00 ED electromechanical dosing drive via a frequency-controlled three-phase asynchronous motor to increase productivity through simultaneous movements, more gentle material preparation, and relevant energy savings compared to hydraulic dosing Loading and transport (Europe-wide) can be organized on request, at an additional charge. Prices plus VAT Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Kondisi: bekas, Tahun pembuatan: 2005, gaya penjepit: 25 kN, volume langkah: 440 cm³, tekanan injeksi: 1.550 batang, berat keseluruhan: 2.500 kg, jam kerja: 40.000 h, diameter konveyor sekrup: 25 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan Nkjdpoynbcnefx Ahweu

Tahun pembuatan: 2007, jam operasional: 88.893 h, Kondisi: siap digunakan (bekas), produsen pengendali: HAITIAN, Arburg A470 C 1500-400 ini diproduksi pada tahun 2007. Dilengkapi dengan sistem penanganan Haitian yang dipasang pada tahun 2022, penutup pelindung, serta konveyor untuk penempatan bagian. Dengan 88.893 jam kerja, pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Arburg A470 C 1500-400 ini. Hubungi kami untuk informasi lebih lanjut. Informasi tambahan • Sistem penanganan Haitian Nkodpfxsx D Rbqe Ahwou • Penutup pelindung • Konveyor untuk penyimpanan bagian

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Arburg injection moulding machine, year 2000. 130 tonnes clamping force. The machine is delivered fully refurbished at our facilities in Heras (Cantabria). New seals in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660x840 mm OPENING STROKE: 575 mm MAX. DISTANCE BETWEEN PLATENS: 800/850 mm TIE BAR DISTANCE: 420x420 / 470x470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ SHOT WEIGHT: 117 g Nodjrxtpdjpfx Ahweku YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 22.626 h, diameter sekrup: 25 mm, Arburg 470 H 1000-170 ini diproduksi pada tahun 2014. Mesin injeksi hidrolik dengan gaya penutupan 100t dan diameter sekrup 25mm. Beroperasi pada 400V 3∼, 50Hz dengan total daya terpasang 75kW. Ideal untuk aplikasi injection molding presisi. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Unit tersedia: 2 unit serupa • Tegangan operasi: 400 V, 3 fasa, 50 Hz Njdpfox D Rcuox Ahwsku • Tegangan kontrol: 230 V, 50 Hz; 24 V AC • Arus nominal motor: 80 A • Arus nominal pemanas: 58 A • Arus nominal total: 138 A • Daya terpasang total: 75 kW • Tahun kalibrasi: 2027 • 1x unit tahun 2011 juga tersedia

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 350 kN, DE-01 Nksdpewqnggofx Ahwju

Kondisi: baik (bekas), Tahun pembuatan: 1998, jam operasional: 83.000 h, diameter sekrup: 50 mm, berat keseluruhan: 7.400 kg,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 75.942 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 213141, gaya penjepit: 400 kN, diameter sekrup: 18 mm, jarak antara tiang: 270 mm, Perlengkapan: dokumentasi / manual, Here we offer, as a trading company specializing in injection moulding machines, the following well-maintained used injection moulding machine for sale. Naturally, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been wholesale dealers of injection moulding machines for more than 25 years. Manufacturer: Arburg Model: 270C 400-70 Control Unit: Selogica Year of Manufacture: 2010 Operating Hours: 75,942 h Machine Number: 213141 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine is retrofitted with interfaces for: - Tool temperature control - Heating channel - Colour / dyeing via Siemens Logo PLC control system German language - From first owner – sourced in Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Platen size: 446 x 446 mm Opening stroke: 350 mm Mould height: min. 200 mm Maximum distance between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical: Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50 A Weight: 2,150 kg Warranty Warranty until initial commissioning Loading / Shipping Free loading onto buyer's truck or delivered free to site subject to reimbursement of freight costs Available from our warehouse in Hanover, Germany Njdswfua Aspfx Ahwoku Information about our machines and our company: - We only sell machines purchased from ongoing production, held at our Hanover warehouse - All offered machines are checked and tested prior to decommissioning - We do NOT sell insolvency assets — we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and care are standard practice - All available machines can be inspected at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 53.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206432, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine for sale: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for more than 25 years. Current note – Tax advisory and benefit for used machinery As of 01/07/2025, used machinery is also eligible for a special depreciation allowance of 30% per annum for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well-maintained – German origin Extras: - Complete high-wear resistant thermoplastic injection unit, 50 mm - Screw in HC (high corrosion) version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastics processing - Open nozzle, 50 mm - Extended nozzle tip, 50 mm - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping plate set, 570 mm, central ⌀ 125 mm - 2x air eject systems with pressure regulator - Air eject connection 1 - Selector unit connection - 1 core pull for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67 standard), 50-pin - Central computer interface ARBURG - Additional socket distributor: 1 CEE, 1 Schuko - Serial printer interface, USB - CompactFlash interface for data storage - Operator authorization via chip card according to EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Colour dosing unit interface - Manually adjustable cooling circuits - Machine-related cooling circuits regulated - Advanced monitoring equipment package - Advanced movement package - Production control equipment package - Optimization/operation support package - Quality assurance equipment package - Documentation equipment package Complete documentation included Injection unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Injection volume: 392 cm³ Clamping unit: - Clamping force: 200 tons / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platen: 795 x 795 mm - Minimum mould height: 300 mm - Maximum platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Nkodpfx Asw Tt R Iohwou Drive capacity: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Loaded free onto buyer’s truck or delivered free to destination against freight charge Available from our Hannover/Germany warehouse Information regarding the machines we offer and our company: - We only sell our own stock, machines purchased from ongoing production, available from our Hanover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from reputable companies with consistent maintenance and care - All machines offered can be inspected at our warehouse

Tahun pembuatan: 1998, jam operasional: 62.144 h, Kondisi: siap digunakan (bekas), Clamping force: 2,000 kN, tie bar spacing: 520 mm x 520 mm, platen dimensions (X/Y): 715 mm x 715 mm, minimum mold installation height: 250 mm, maximum opening stroke: 650 mm, ejector stroke: 225 mm, ejector force: 66 kN. Screw diameter: 55 mm, shot weight: 240 g, injection pressure: 2,500 bar, stroke volume: 286 cm³, injection unit: 675. Machine dimensions (X/Y): approx. 5,600 mm x 1,700 mm, weight: approx. 7,000 kg, operating hours: approx. 62,144 h. Documentation available. Inspection on site possible. Expected to be available from June 2025. Nkodpfx Ahov Ifwxjwju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194573, gaya penjepit: 1.000 kN, Here we offer a well-maintained injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2005 onwards as part exchange. Please offer us any machines that will become available from your operations. Important notice – Tax information and benefit for used machines From 01.07.2025, used machines are also eligible for a special depreciation of 30% per annum. In addition to the lower purchase price compared to a new machine, you can benefit from the same depreciation rates as with new equipment. Reference: Growth Booster, (§ 7 Paragraph 2 EStG-E) Nsdpfx Ahjhyumgewjku Arburg 2-colour injection moulding machine with complete maintenance history, featuring both horizontal and vertical injection units. Machine No.: 194573 Arburg 420C 1000-150/150 Year of manufacture: 2004 Control system: Selogica Extras: - 2x core pull (simultaneous movement, adjustable holding pressure) - Intermediate stop for hydraulic rotary control - CF card drive - Interface for production control - Interface for dosing unit - Interface for conveyor belt - Prepared for Multilift - Selector unit with connection - Extended installation height to 350 mm - Highly wear-resistant screws - Air blow-off device connection - 2-colour / horizontal & vertical unit - Including disks/CF cards - complete documentation/manuals Clamping force: 100 tons / 1000 kN Tie bar spacing: 420 x 420 mm Mould plates: 570 x 570 mm Opening stroke: 500 mm Max. daylight: 850 mm Mould height: 350 mm 1st Injection unit (150) Screw: 30 mm (highly wear-resistant) Shot weight: 65 g Shot volume: 78 ccm Injection pressure: 2210 bar 2nd Injection unit (150) Screw: 25 mm (highly wear-resistant) Shot weight: 45 g Shot volume: 54 ccm Injection pressure: 2500 bar Weight/Dimensions Dimensions: 4.63 x 1.3 x 3.9 m (L x W x H) Weight: 4,000 kg Connected load: 125 A pre-fuse Delivery free to buyer’s business address up to the yard – Unloading is the buyer’s responsibility & risk from the truck loading area. The machine is offered fully tested and functional. For your information about us and the machines on offer: - We only sell machines that we have purchased ourselves directly from running production, from our warehouse in Hannover - All machines undergo inspection and testing prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from successful businesses where maintenance and care are a standard practice - All machines offered are available for inspection at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 203129, gaya penjepit: 400 kN, diameter sekrup: 25 mm, We offer the following well-maintained pre-owned injection moulding machine as a specialist dealer in injection moulding machines: We also actively purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a large-scale dealer for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and cylinder replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Material diverter The machine features retrofitted interfaces for: - Tool temperature control - Heating channel - Colour dosing/colouring via Siemens Logo PLC control German language - from first ownership, sourced in Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mould height: minimum 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: maximum 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Nkodpfxsx Rvcio Ahwou Warranty: Warranty up to first commissioning Loading/Shipping: Free loading onto buyer’s truck or delivery by freight reimbursement Available ex-warehouse Hannover, Germany Please note about our company and the machines we offer: - We only sell machines acquired directly from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested prior to removal - We do NOT sell insolvency assets and we are NOT brokers dealing with third-party property - All machines on offer come from successful companies for whom maintenance and servicing are a matter of course - All machines are available for inspection at our warehouse

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Minimum/maximum installation height: 250 mm / 750 mm, opening stroke: 500 mm, clamping force: 1,500 kN, screw diameter: 40 mm, tie-bar spacing: 420 mm, injection volume: 182 cm³, operating hours: 98,234 h. Documentation available. On-site inspection possible. Nodpfx Ahjt E Trheweku

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 72.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 208574, Perlengkapan: dokumentasi / manual, We are offering the following well-maintained used injection moulding machine for sale as part of our injection moulding machinery trading activities. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been wholesale dealers in injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2008 Operating hours: 75,942 h Machine number: 208574 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has been retrofitted with interfaces for - Mould temperature control - Heating channel - Colouration/dyeing via Siemens Logo PLC control. German machine - Single owner – origin Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 tons Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Max. distance between platens: 550 mm Ejector stroke: 125 mm Max. ejector force: 30 kN Injection unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical specs Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Nkodewn Nr Eepfx Ahwou Main fuse: 50 A Weight: 2,150 kg Warranty Warranty up to initial commissioning Loading/Shipping Free loaded onto buyer’s truck or free delivery within Germany subject to freight charge reimbursement Available ex our warehouse in Hannover, Germany Information about the machines we offer and our company: - We only sell machines purchased from ongoing production, directly from our Hannover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies for whom regular maintenance is a matter of course - All offered machines are available for inspection at our warehouse