Monitor Arburg

ARBURG

Kondisi: bekas, Tahun pembuatan: 2017, gaya penjepit: 250 kN, volume langkah: 570 cm³, tekanan injeksi: 2.470 batang, berat keseluruhan: 14.500 kg, jam kerja: 22.900 h, diameter konveyor sekrup: 55 mm, Basis pengiriman: FCA Pegnitz Bedpfexv D Tksx Abhswh Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke: 350 mm Mould height: 200 mm Tie bar spacing (vertical): 320 mm Tie bar spacing (horizontal): 320 mm Mould mounting plates: 446x446 mm Injection pressure: 2240 bar Injection flow rate: 124 cm³ Ejector stroke: 125 mm Ejector force: 30 kN Net weight: 2080 kg Bwjdpfsu Dmgqjx Abhsh Type: Horizontal Drive: Hydraulic Selogica CF card reader Machine tested English language

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 9.171 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control with a 15-inch touchscreen provides enhanced operator comfort. Take advantage of this opportunity to purchase an Arburg 520S-1500-400. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended two-stage closing program • Hydraulically servo-driven ejector on the moving platen • Injection/plastification unit: • Screw diameter: 45 mm (without nozzle) • High-wear-resistant design • Sintered metal non-return ring • CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature-resistant thermoplastics • Technology level 2 – servo-driven dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Auxiliary equipment: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Bodpfsyg I Ihex Abhowh Additional equipment • Not included in this listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Kondisi: baru, Tahun pembuatan: 2023, Schließkraft: 320 t Schraubendurchmesser: 30 mm Schussgewicht: 97 g Abstand zwischen den Holmen V: 720 mm Abstand zwischen den Holmen H: 720 mm Schussvolumen: 106 cm3 Typ: Mehrkomponenten Bwodpfoyg I Emox Abhjh Antrieb: Hybrid

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 13.361 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 injection molding machine was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-driven dual-circuit pump system for precise movements. The SELOGICA direct control with a 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic Arburg 520S-1500-400 injection molding machine. Contact us for further details. Bjdpeyg I Egjfx Abhewh • Programmable and controlled clamping force build-up; advanced two-stage clamping program • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High-wear resistant version; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Kondisi: baru, Tahun pembuatan: 2023, 1 Bjdpfeyg I A Sjx Abhswh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mold height: 150–300 mm Platen distance: 350–500 mm Tie bar spacing: 221 mm Mold mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Bjdpsuykh Dsfx Abhswh Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Arburg 520 TV 1300-350 (2004) Bwsdpfx Abjwp E E Rohoh

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, Arburg Allrounder 630A Mesin Injection Moulding Plastik Multi Komponen (2021) Bodpfx Ajygx Urebhswh Arburg Allrounder 630A 2500-800/400 L2, Mesin injection moulding plastik multi-komponen dengan gaya clamping 2500kN (2021), termasuk unit injeksi horizontal 800 dan unit injeksi vertikal 400.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, gaya penjepit: 1.300 kN, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35–45 mm and a clamping force of up to 2000 kN. The machine is equipped with a take-out robot as well as an enclosure with a Filter Fan Unit, ensuring clean operation. Ideally suited for precision plastics processing, it offers a mold height of 250 mm and a platen distance of 825 mm. Please contact us for further information about this machine. Bodpfxox D E Dyo Abhewh Additional Equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Advantages Technical Machine Advantages • Sound pressure level: 70 dB(A) | ± 3 Additional Information Screw diameter: 290 unit: 30 / 35 / 40 mm 400 unit: 35 / 40 / 45 mm 800 unit: 45 / 50 / 55 mm Maximum injection pressure: 290 unit: 2500 / 2000 / 1530 bar 400 unit: 2500 / 2000 / 1580 bar 800 unit: 2470 / 2000 / 1650 bar Maximum shot weight (g PS): 290 unit: 97 / 132 / 172 g 400 unit: 141 / 184 / 232 g 800 unit: 291 / 359 / 434 g Heating capacity 290 unit: 7.7 kW | 5 zones 400 unit: 9.7 kW | 5 zones 800 unit: 19.9 kW | 8 zones Net machine weight: 290 unit: 5600 kg 400 unit: 5900 kg 800 unit: 6350 kg