Mesin cetak injeksi

Arburg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 79.008 h, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, berat injeksi: 2.000 g, tinggi cetakan (min.): 250 mm, panjang pelat: 795 mm, tinggi pelat: 795 mm, panjang total: 6.000 mm, lebar total: 2.000 mm, berat keseluruhan: 10.950 kg, Arburg 5770A-2000-170 Mesin Cetak Injeksi Hibrida Dua Komponen dengan Katup Pemilah (243) dengan katup pemilah Nomor: 243 Ketersediaan: tersedia Tahun produksi: 2010 Produsen: Arburg Kondisi mesin cetak injeksi: bekas Diameter sekrup [mm]: 50//35 Berat injeksi [g]: 359//105 Tekanan injeksi [bar]: 2000//1470 Gaya penguncian [kN]: 2000 Jarak antar pelat [mm]: 570 x 570 Ukuran pelat [mm]: 795 x 795 Tinggi cetakan minimum [mm]: 250-550 Jenis kontrol: Selogica Bahasa: Inggris, Jerman Jam kerja [jam]: 79008 Berat [kg]: 10.950 Bsdpfx Aszq A S Ijd Rowr Dimensi [mm]: 6000 x 2000 Corong pengisian: TIDAK Katup udara: x5 Rantai penanda inti: 1x

Kondisi: bekas, Tahun pembuatan: 1999, 4x Kart elektronik – Arburg Tahun pembuatan sekitar 1999 Bwedpszl R Nqefx Ad Rer

Kondisi: bekas, Mesin cetak injeksi ARBURG, Tipe Allrounder 320 C 600-100 Tahun pembuatan: 09/2002 Bsdpfszqglrex Ad Rewr Kekuatan penutup: 60 ton. Diameter sekrup: 25 mm Mesin akan dibongkar pada tanggal 17.08.2026 dan diangkut ke gudang kami, atau langsung dikirim ke tempat Anda.

Kondisi: bekas, Tahun pembuatan: 2005, 1 unit mesin cetak injeksi hidraulik ARBURG ALLROUNDER SELECTA 270S Dapat dibongkar sendiri Warna: seperti pada gambar, sesuai dengan gambar dan pemeriksaan fisik Tahun pembuatan: 2005 Bsdpozqcl Ijfx Ad Rswr Nomor mesin: 198190 Dimensi P/L/T: 350x110x200 cm Kondisi: bekas

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 78.099 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 25 mm, jarak antara tiang: 520 mm, volume langkah: 71 cm³, tekanan injeksi: 1.550 batang, berat injeksi: 65 g, langkah pembukaan: 925 mm, tinggi total: 2.800 mm, berat keseluruhan: 10.700 kg, Perlengkapan: dokumentasi / manual, Arburg 520 S 1600 290/70 2K termasuk Multilift H – mesin cetak injeksi 2 komponen yang sangat terawat dan berfungsi penuh. Mesin ini berasal dari fasilitas produksi yang dikelola dengan sangat baik. Menurut operator, ketersediaan mesin selalu menjadi prioritas utama: unit ini dirawat secara teratur dan cermat, serta beroperasi terus-menerus dengan penyaringan oli tambahan. Mesin ini dalam kondisi yang sangat baik dan siap digunakan, dan dapat segera dioperasikan setelah pemasangan. Peralatan dan fitur teknis utama: • Tahun pembuatan 2009 • 12,3 juta siklus / 78.099 jam operasi dalam mode otomatis • Versi 2 komponen dengan unit cetak injeksi horizontal 290 dan unit cetak injeksi vertikal 70 • Unit cetak injeksi 1: diameter sekrup 25 mm, maks. 71 cm³ • Unit cetak injeksi 2: diameter sekrup 18 mm, maks. 21 cm³ • Jarak buka cetakan 925 mm • Rotasi indeks elektrik • Saluran panas 12 zona terintegrasi • 3 x penggerak inti • 2 x penghembusan, termasuk kontrol untuk penutup jarum • Antarmuka untuk unit pendingin dan pengering • Berbagai input dan output yang disesuaikan dengan kebutuhan pelanggan Termasuk Arburg Multilift H, kapasitas angkut 6 kg: Bedpfx Asxzix Aed Rjwr • 2 x vakum • 5 x penjepit kerja ganda • Sumbu Z servo, 800 mm • Sumbu C, G, X, dan B pneumatik • Berbagai input dan output, termasuk pemantauan penjepit Mesin ini berfungsi penuh. Dokumentasi/manual tersedia. Ini adalah kesempatan yang sangat baik bagi pengguna yang mencari mesin cetak injeksi 2K yang terawat dan siap digunakan dengan otomatisasi.

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 45.000 h, gaya penjepit: 160 kN, volume langkah: 23 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 6.000 kg, diameter konveyor sekrup: 18 mm, Basis pengiriman: FCA Pegnitz Bsdpjzp R I Iofx Ad Rewr Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 15.000 h, gaya penjepit: 160 kN, volume langkah: 23 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 6.000 kg, diameter konveyor sekrup: 18 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Bwodpfx Aezp R Izjd Rjr Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 1.000 kN, This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical primary movements powered by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical primary movements with servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Compact hydraulic unit with pressure accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting plates with centring ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, high wear/ corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for mounting a linear robot on the fixed platen • Mould protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, switch cabinet, interfaces: • Selogica control • Software packages (Pos 555: Advanced mechanical cycle controls; Advanced movements; Production control; Optimisation/operator support; Quality assurance control; Documentation) • Temperature-controlled switch cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorisation via card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) Bwjdpfxsx D Hgvo Ad Ror • 12 mould temperature measuring zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm temperature controllers (Pos 453/01) • USB-serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 69.990 h, gaya penjepit: 320 kN, volume langkah: 154.314 cm³, tekanan injeksi: 25.001.280 batang, berat keseluruhan: 14.500 kg, diameter konveyor sekrup: 3.550 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan Bwsdpfx Adsxl Hi Ts Rsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 21.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190332, Perlengkapan: dokumentasi / manual, From July 1, 2025, used machines can also be taken into account for tax purposes with a special depreciation of 30% per year. 3-color or 2-color injection molding machine (the 3rd unit can be deactivated via software) (horizontal/vertical, plus 3rd in L-position with safety enclosure) ##### Can also be converted to 2-color operation ##### Immediately available from our Hannover warehouse Manufacturer: Arburg Model: 420C 1000-150/150/60 Year of manufacture: 2003 Machine number: 190332 Controller: Selogica Operating hours: only 21,200 h +++++Clamping unit+++++ Control: Selogica Clamping force: 1,000 kN / 100 tons Tie bar spacing: 420 x 420 mm Mounting platen: 795 x 795 mm Mold height: 300 mm Max platen distance: 950 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic ++++Injection unit 1 (150 assembly)++++ Screw diameter: 15 mm (highly wear-resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2,750 bar ++++Injection unit 2 (150 assembly)++++ Screw diameter: 15 mm (highly wear-resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2,750 bar ++++Injection unit 3 (60 assembly)++++ Screw diameter: 15 mm (highly wear-resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2,080 bar Extras 1 ALLROUNDER 420 C 1000-150/150/60 1 Vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping rails, manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 open nozzle 15 mm, wear-resistant, without heating band (1st inject. unit 150) VE-902/00 1 Technology level 2 – servo-controlled hydraulic system with two variable pumps for controlled machine movements, with position-dependent, controlled target ramps. Build-up of mold clamp force is programmable and regulated. The clamp force is servo-controlled by the second pump. Set-up force for the nozzle assembly is programmable. The set-up force is manually adjustable and electronically maintained. 1 Technology level 3 hydraulic system with 3 variable pumps for simultaneous movements of main axes and faster movements of secondary axes. For 2-component machines, as hydraulic system for the 2nd injection unit (requires technology level 2, VE 132/03) VE-130/40 1 Heating band for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into parting line with 2-component processing VE-136/02 1 Position-controlled screw with control valve at injection unit, incl. controlled back pressure, nozzle set-up force manually adjustable VE-561/20 1 Position-controlled screw with control valve for multi-component machines – for injection unit 2 VE-561/30 1 Injection unit 60 for horizontal injection into the parting line as the 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 - Injection unit 60 in L-position: assembly lowered by 70 mm, incl. special parting level full safety guard VE-907/00 Bsdogrzh Eopfx Ad Rewr 1 Plasticizing cylinder kit 15 mm (without nozzle), with pre-positioned feeder and pressure reducing valve, in highly wear-resistant design with sintered metal check valve, (L-position) VE-908/00 1 Open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating band for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection unit

Kondisi: baru, Tahun pembuatan: 2005, Screw diameter: 60 mm Injection weight in polystyrene: 607 g/PS Clamping force: 3,200 kN Control system: SELOGICA Bedpfx Adsvkqfao Rowr Mold installation height: 300 mm Mounting plate: 1,040 x 1,040 mm Opening stroke: 700 mm Total power requirement: 96 kW Machine weight: approx. 17 t Space requirement: approx. 7 x 2.2 x 2.3 m This injection molding machine for plastics is in very good condition, can be inspected by appointment with the owner, and is supplied including Multilift H. Operating hours: 42,878 h