Arburg 370S-800-150

ARBURG

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 800 kN, 1 Pgedjyxqiyjpfx Abxji

Kondisi: bekas, Tahun pembuatan: 2010, Milling machines Travel X: 760 mm Travel Y: 510 mm Travel Z: 610 mm HSC (High-Speed Cutting) machine Number of axes: 3 Milling machine / machining center Control: Hurco WinMax Spindle taper: SK - A40 Spindle speed: 12,000 rpm Table size X: 1,020 mm Table size Y: 508 mm Max. workpiece weight: 1,350 kg Tool changer: 24 stations Drive power: 13.5 kW Torque: 214 Nm Podpfx Aov D U Apobxjgi Rapid traverse: 35 m/min Spindle cooling Chip conveyor

Kondisi: baik (bekas), Tahun pembuatan: 1998, gaya penjepit: 500 kN, 1 Pedpfx Abeyxp Easxogi

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 60.902 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206087, gaya penjepit: 400 kN, diameter sekrup: 22 mm, volume langkah: 34 cm³, Dijual mesin injection molding merek Arburg tipe 270 U 400-70. Mesin dalam kondisi berfungsi penuh dan siap langsung digunakan. Data teknis: Tahun pembuatan: 08 / 2007 Jam operasi otomatis: 60.902 jam Nomor seri: 206087 Tegangan operasi: 400 V Tegangan kontrol: 230 V (~ 50 Hz) / 24 V Arus nominal: 82 A / 39 A Gaya penutup: 400 kN Jarak antar tie-bar: 270 mm x 270 mm Unit injeksi: ukuran 70 Diameter screw: 22 mm Kontrol: Selogica Aksesori yang disertakan: Penarik inti, penutup jarum pneumatik, diverter selektif. Pjdpfx Aeyk Tlaobxsgi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, 1 Pgjdpfefyiqbox Abxji

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 150 kN, diameter sekrup: 18 mm, For sale is an Arburg 220 S 150-60 183385 injection moulding machine. The machine is in good condition and fully operational. Technical data: Clamping force: 150 kN Opening stroke: 275 mm Mould installation height: 150 mm Clear tie bar distance: 221 x 221 mm Injection unit: 60 Screw diameter: 18 mm Calculated shot volume: 20 cm³ Shot weight: 18 g/PS Injection pressure: 2500 bar Injection volume: 32 cm³ Net weight: 1900 kg Pump hours: 94,830 h Automatic operation: 85,152 h Pgedpeyxnmpsfx Abxji The offer refers to the machine only, without tooling; this can be negotiated separately. Transport and loading can be organised Europe-wide at additional cost upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 81.912 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 202150, gaya penjepit: 180 kN, 1 Pjdpsyxm Thefx Abxjgi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Arburg 270 M-350-90 U Clamping force: 35 t Year of manufacture: 1997 Screw diameter: 25 mm Tie bar distance: 270 x 270 mm Pgodpfjg S I S Aox Abxoi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, gaya penjepit: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with modern controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection molding machine, you should consider the hydraulic injection molding machine Arburg Allrounder 520 S 1600-290 / 290, which we offer for sale. Contact us for further details. • Injection Units and Plasticizing • 1st Injection Unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw control ScrewPilot • 2nd Injection Unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: bilateral • Multi-component processing; separating plane device on short rails for 2nd component • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling Pgjdpfjyxdwdex Abxsi • Drive unit with 30 kW motor • 65 l/min charging flow • Accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector plate • Core Pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Mold Connections Pneumatics/Hydraulics • Electrical connection pneumatic NVD 1 (in the mold) • Electrical connection pneumatic NVD 2 (in the mold) • Electrical and hydraulic connection NVD 3 (in the mold) • Electrical and hydraulic connection NVD 4 (in the mold) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling Water and Mold Circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (supply) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Controls and Electrical Equipment • Selogica direct control; technology level • Protection circuits for heating zones (1-6 with 16 A) • 15 electric heating zones for mold heating • Boost function for heating circuits (hot runner) • Upper safety guard open, raised to safety distance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Kondisi: bekas, Tahun pembuatan: 2003, Arburg mesin injection moulding tersedia untuk pembelian segera. Mesin masih beroperasi. Pemeriksaan dapat dilakukan dengan janji temu. Pjdpfx Abeyw Snbexjgi Detail teknis lengkap tersedia di dokumen/foto terlampir. Gaya penjepit (maks.): 3200 kN Gaya pembuka cetakan (maks.): 130 kN Langkah pembukaan (maks.): 700 mm Gaya ejektor (maks.): 100 kN Langkah ejektor (maks.): 250 mm Diameter ulir (mm): 60/70/80 Panjang ulir efektif (L/D): 23/20/17,5 Volume langkah (cm³): 792/1078/1407 Tekanan injeksi (bar): 2500/2000/1530 Laju alir injeksi (cm³/dtk): 224/306/400 Jarak antara pelat (maks.): 1000–1400 mm

Tahun pembuatan: 1993, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: RH 241-1-50-30v, 217ef9a0 Pedpfopy Eygex Abxsgi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 78.394 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 213142, gaya penjepit: 400 kN, diameter sekrup: 18 mm, volume langkah: 23 cm³, Here we offer, as a dealer specializing in injection moulding machinery, the following well-maintained used injection moulding machine for sale. Of course, we also buy well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h (screw and barrel replaced) Machine number: 213142 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator/diverter The machine has retrofitted interfaces for: - Tool temperature - Heating channel - Colour/dosing via Siemens Logo PLC control German language - Single previous owner – Origin: Germany Regular maintenance performed by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Platen size: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Max. distance between platens: 550 mm Ejector stroke: 125 mm Max. ejector force: 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2500 bar Electrics: Pump: 11 kW Heating: 4 zones, 4 kW total Pedpfxex Rvcve Abxsgi Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty until initial commissioning Loading/Shipping: Free loaded onto buyer’s truck or delivered free to customer’s door (shipping costs additional) Available ex stock Hannover, Germany

Kondisi: bekas, Tahun pembuatan: 2008, Screw diameter 18 mm Clamping force 250 kN Max. opening stroke 350 mm Pjdpfx Ajywzv Ijbxogi Mould installation height 200 mm Controller: Selogica ARBURG ALLROUNDER 270 S 250-70 – Injection Moulding Machine – Year of Manufacture: 2008 – Excellent Condition For sale is a reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection moulding machine from year 2008. This machine is ideally suited for precise plastic parts in small to medium production runs and impresses with its robust design and renowned ARBURG quality, “Made in Germany.” Technical highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Tie bar spacing: approx. 270 x 270 mm - Mounting plates: approx. 380 x 380 mm - Connected load: 53 kW Electrical equipment: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current: 89 A Further information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - The machine is robust, durable and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (typical for this series) - Compact design - High process reliability - Long-term spare parts availability Inspection possible by appointment. Further information, photos or videos available on request.

Kondisi: bekas, Tahun pembuatan: 2003, Pressing force 250 t Stroke 20 - 190 mm Stroke rate 25 - 140 /min Throat depth 460 mm Clearance between frame walls 590 mm Shut height 690 mm Table surface 1500 x 880 mm Pass-through opening in table 950 x 250 mm Podpfx Abjvuun Tjxegi Table height above floor 900 mm Slide surface 870 x 725 mm Slide adjustment 120 mm Drive power 30.0 kW Weight 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading and automatic operation according to CE standards with infinitely variable drive, light barrier (make: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the slide, automatic stroke adjustment, motorized slide adjustment, pneumatic slide weight compensation, fixed bolster, pneumatic drawing cushion in the table (20 t), motorized central lubrication, control panel with two-hand operation Clear distance between tie rods 940 mm Lateral passage 900 mm

Kondisi: bekas, Tahun pembuatan: 2019, de-to-hu-it-lt Pjdpfeywzvzex Abxsgi