Mesin penghancur poros ganda

Arjes 760 D (PLUS) + Magnet

Kondisi: bekas, Tahun pembuatan: 2016, 3999cbbc Dedpsx R A Ufefx Aktekn

Kondisi: baru, Tahun pembuatan: 2025, Features: - Overbelt neodymium magnetic separator - HP Dkodjw Elbdjpfx Aktjn - Dust suppression - Belt speed control - Self-propelled drive, semi-trailer

Kondisi: baru, berat muatan maksimum: 50.400 kg, berat keseluruhan: 65.000 kg, konfigurasi gandar: 3 gardan, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-029, lebar total: 800 mm, panjang total: 4.700 mm, tinggi total: 1.900 mm, jenis arus masuk: tiga fasa, konsumsi energi: 2 kWh, Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Capable of separating all metals from approx. 1 mm grain size. Suitable for material with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, available for inspection and testing. Camera option available on request! If the machine is too small, we also build larger versions. This is our demonstration unit. Maximum throughput depends on material and purpose. Dksdpfx Aeqabm Eektjn Price negotiable!

Kondisi: bekas, jarak tempuh: 53.857 km, daya: 270 kW (367,10 hp), pendaftaran pertama: 06/2003, jenis bahan bakar: diesel, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, warna: kuning, tipe perpindahan gigi: otomatis, kelas emisi: Euro 3, lebar total: 2.680 mm, tinggi total: 3.750 mm, Perlengkapan: pemanas parkir,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Dedpfx Akjvf E Avotokn Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, DIE MASCHINE IST BRANDNEU Dsdpfx Asrc Dkqoktokn Die Maschine eignet sich zum Verpressen von Aluminium- und Stahlblechdosen mit einer Materialstärke von bis zu 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche Elektro- und Elektronikkomponenten stammen von Schneider und Siemens. Die Maschine ist vollautomatisch und verfügt über eine SPS-Steuerung sowie ein Siemens HMI Simatic Touchpanel mit Not-Aus-Tastern. Die Maschine wird mit einer Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden – je nachdem, was zuerst eintritt – ausgeliefert. Je nach Einsatzgebiet ist eine Öl-Kühl-/Heizanlage vorhanden. Optional ist ein MB 500 Magnetabscheider sowie ein VH (120-250) Vibrationsdosierer erhältlich. Diese ermöglichen die Separierung von Aluminium- und Stahldosen sowie die Abscheidung von Staub- und Schmutzpartikeln im Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behältermaß (B x L x H): 500 mm x 1.000 mm x 330 mm Leistung: Bis zu 1.000 kg/h (Aluminium) Bis zu 2.000 kg/h (Stahl) Ballengewicht (mechanische Waage): 10–20 kg Taktzeit: 30 Sekunden Deckelzylinderkraft: 25 Tonnen Hauptpresszylinderkraft: 100 Tonnen Arbeitsdruck: 225 bar Maschinenabmessungen (B x L x H): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Kondisi: baru, Tahun pembuatan: 2022, Shear; Suitable for use with: construction machinery Dedpfepa Rpbox Aktjkn

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Infeed: 1,000 x 350 mm, max. feed piece size: 320 x 320 mm, 45 kW electric motor, crusher weight: approx. 13.3 t, incl. steel subframe Dkedpfxewb Dfge Aktsn

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 5 h, Perlengkapan: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal untuk puing bangunan, beton, limbah besar, aspal, bitumen, kayu, limbah campuran, biomassa, karet, plastik, keramik, panel fotovoltaik, dan bahan lainnya. Dalam harga dasar mesin sudah termasuk: Dksdpfx Aksyf Ni Detsn - Satu set poros lengkap dengan kaset dan bantalan pilihan (untuk beton, kayu, biomassa, limbah campuran, lainnya) - Sistem penyemprotan untuk mengurangi debu - Magnet tetap melintang (membuang bagian baja ke samping) - Bak pembuangan samping di bawah magnet - Bilah pembentuk