Penghancur dua poros

Arjes Impaktor 350

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Dedovf E Avepfx Airouu Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Screening area: approx. 1,300 x 4,000 mm new semi-mobile steel construction Dsdpfxotpgvxs Airouu

Kondisi: baru, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor swing diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen basket locking for contaminant discharge Dujdsbq St Hjpfx Aireu Weight: approx. 18,500 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, 600 HD immediately available from stock at a special price EXW, 06188 Landsberg, Germany The 600HD alligator shear is a fast and powerful metal shear with an extended hold-down, making it ideal for all cutting and cleaning tasks, whether for cables, plastic profiles or window frames. Its cutting capacity is up to 63 mm (2.5″) of construction steel round bar. Dusdpfxjib Irce Airju The 600HD alligator shear is probably best known for its use in processing car radiators. It was developed and built at the request of customers who wanted a shear with a longer blade for cutting larger parts, such as car radiators, in a single stroke. The automatic hold-down clamp secures the material during the cutting process and prevents kickback, speeding up operation and increasing operator safety. Jaw opening and closing are controlled via a foot pedal. As soon as the foot pedal is released, the blades return to the open position. However, continuous cutting can be achieved by maintaining foot pressure on the pedal. The 600HD can be supplied with either an electric motor or a 2-cylinder diesel engine.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, nomor mesin/kendaraan: SY008CE0693K8, Year of manufacture: 2024 Engine power: 73 HP (53.7 kW) Operating weight approx. 8,800 kg Yanmar engine, Stage V, approx. 73 HP, 202 Nm, 3,319 cc Hydraulic system: load sensing, max. 185 l/min 1st proportional auxiliary control circuit (GRL/hammer) on joystick 1 2nd proportional auxiliary control circuit (grapple) on joystick 2 Safety lift valves for arm and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the arm Bucket breakout force (ISO): 56 kN Arm tear-out force (ISO): 38 kN Operator cabin ROPS Adjustable boom, dipper arm 2,050 mm Dozer blade Rubber tracks 450 mm Battery master switch Travel alarm and beacon Emergency engine stop switch LED work lights: 2x on the cab roof LED work light: 1x on the boom 12V socket Document compartment Dujdpfev Nix Asx Airju Radio with speaker

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 381201764, Gasparin GI118CV OLIMPO Mobile Jaw Crusher on Crawler Tracks The raw power demonstrated by the OLIMPO, thanks to its 1100x800 crusher, makes it the ideal machine for professionals in quarries and recycling applications. This uncompromising machine was designed with a clear focus on operational requirements, productivity, effortless maintenance, and transportability. Equipped with state-of-the-art control and operating systems, it is both user-friendly and environmentally responsible. The HCS Control System (Hydraulic Crushing System) actively supports automated machine operation, ensuring maximum profitability through reduced operating costs and enhanced productivity—making it truly incomparable. The reinforced structure between the frame and the crusher provides outstanding robustness against stress and heavy-duty operations. The unique design of the supporting structure ensures excellent access to all machine components during maintenance. The OLIMPO crusher delivers impressive and unmatched performance, whether processing natural stone, handling recycling tasks, or in rental operations. Production capacity: approx. 360 t/h Patented HCS system Dujdjhd I U Espfx Aireu Proportional distributor with “load sensing” for system optimization and a reduction in fuel consumption by approx. 30% Optional pre-screening Gap width hydraulically adjustable—even during crushing operation Quick wedge locking system with folding cylinders Discharge height: 3200 mm Dust extraction system Refueling pump Magnetic separator Warranty: 1 year or up to the maximum operating hours from initial commissioning Technical Data: Jaw crusher: 1100 x 800 mm Adjustable crusher gap: 50 to 200 mm Feed hopper: 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen: 1020 x 2000 mm Main conveyor belt: 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Crawler track: 450 x 3800 mm Weight: kg Transport length: 13,850 mm Transport width: 2,550 mm Transport height: 3,390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Tahun pembuatan: 2025, Kondisi: baru, Description:  Screening deck system consisting of 1 deck for screening waste wood or wood chips  Input material: 0-200 mm  Throughput capacity approx. 80 m³/h (depending on material)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer’s own impact walls or subframe Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o Outer dimensions: Length = 5,500 mm; Width = 1,850 mm o Screening area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW gear motors o Screening body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and low-cost adaptation to other grain sizes possible) Dedpfx Aiog I Uqfsrsuu o Bearing lubrication external, optional centralized lubrication available at extra cost

Kondisi: baru, Chcielibyśmy zaoferować wały dedykowane do rozdrabniaczy średniej wielkości z grzebieniami bocznymi, poprzeczką łamiącą oraz kasetą. Modele: LINDNER U75, ARJES VZ750, HAMMEL VB750OLNOVA 75DK -5-7-7 -6-7-7 -8-7-7 -10-7-7 MRW 2.85: -5-8-8 -6-8-8 -8-8-8 -10-8-8 Firma PROTECHNIKA działa już 21 lat i od początku swojej działalności specjalizuje się w produkcji części zamiennych oraz kompletnych linii recyklingowych. W ostatnich latach poszerzyliśmy nasze portfolio o produkcję wałów do rozdrabniaczy wolnoobrotowych. Dzięki wdrożeniu zautomatyzowanych procesów spawalniczych i własnej technologii produkcji, maksymalnie skróciliśmy czas wytwarzania przy zachowaniu powtarzalnej, wysokiej jakości. Wały rozdrabniające to produkt seryjny, co pozwala nam również na współpracę z producentami maszyn w zakresie OEM. Co wyróżnia PROTECHNIKĘ na tle konkurencji? To proste! - Certyfikowane materiały 3.1 - Jakość TUV SUD Rheinland - ISO 9001 - Zautomatyzowany proces spawania / ISO 15613 / ISO 15614 - Uprawnienia spawaczy ISO 9606-1 - ISO 9001:2015 Dodpfsx Hhwdox Aireuu - ISO 14001 - Własne, niezależne biuro konstrukcyjne - realizujemy wszelkie wymagania klientów - Własne CENTRUM BADAWCZO-ROZWOJOWE Relacje z klientami są dla nas najważniejsze, ponieważ ich satysfakcja to nasz sukces!

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.304 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Dodoxx Tigjpfx Airsuu Splash protection (inner and side fenders) Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for intake roller and scraper floor (twin drive) Fuel tank 2 x 450 liters Intake roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged lubrication bars Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is off 24-V electrical control system Separate control box at rear of machine Hydraulically folding fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including one-piece rear flap Rear conveyor: Belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, includes antimagnetic centre section Underside conveyor: Belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at feed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL 2011 deep orange Additional Equipment: Hydrostatic travel drive Scraper floor chain lubrication NEODYMIUM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: engine compartment and rear conveyor Spraying system Delivery date to be agreed Available from 06/2026

Kondisi: bekas, Tahun pembuatan: 2023, 10017 Two-Fraction Star Screen GÜNTHER MULTISTAR ONE / MS ONE Used, Year of manufacture: 2023 Approx. 200 operating hours Mobile star screening plant for screening waste wood, biomass, green waste, and other screenable materials into two fractions, as well as for oversize return. - Input material: bulk density 200 - 650 kg/m³ / maximum moisture content 55% / maximum piece size and individual weight 1000 mm and 20 kg / material feed via conveyor belt or wheel loader / throughput up to 200 m³/h - Control, Operation, Control Cabinet: Type PLC / Operation via display, control panel / manual or automatic mode / power supply AC 400 V, 3P, 50Hz via customer-side 32A plug - System linkage: 16-pin plug connection / cable (15 m) incl. winding device mounted on base frame / screen deck overrun on EMERGENCY STOP / blanking plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / increase of discharge height for usable fraction by 450 mm / all support legs can be controlled individually - Feed hopper: capacity approx. 2.5 m³ / loading height 2500 - 3000 mm / free feed-in length 2300 mm / feeding device: scraper chain conveyor with maintenance-free flat-link chain / drive 2.2 kW, frequency-controlled - Collection conveyor: axle spacing 4600 mm / belt width 1000 mm / belt type flat / plug-on geared motor 2.2 kW, v=1.2 m/s - Connect: Connect! is Komptech's innovative telematics solution / provides an overview of operating status, error messages, statistics, GPS location, and utilization - Petrol-driven hydraulic pump - HyDrive System 2.0 MS ONE Dodpfxjwhy T Ts Airouu - Screen deck 60/90: Output: 0-60/90 and >60/90 mm / length 4500 mm / width 1450 mm / screening area 6.5 m² / inclination 11° ascending / 17 star shafts / star diameter 340 mm / star width 55 mm / axle spacing 266.5 mm / Cleanstar cleaning elements / two drive motors, each 4 kW / speed controlled via frequency converter - Drive motors 50 Hz: Screen deck drive / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / 3 kW drum motor / standard beaters - FKAB with magnetic drum: axle spacing 6200 mm / belt width 1000 mm / installation angle 30° ascending / belt type: profiled, 15 mm chevron / plug-on geared motor 3.0 kW, v=2.2 m/s / discharge height usable 3500 mm - 3950 mm / multipole permanent magnet drum / incl. discharge chute - Oversize discharge conveyor: axle spacing 6200 mm / belt width 1000 mm / installation angle 30° ascending, 220° swiveling / belt type: profiled, 15 mm chevron / plug-on geared motor 3.0 kW, v=2.2 m/s / discharge height usable 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm (LxWxH) Weight approx. 9200 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport, or assembly Errors in description and price reserved Dismantling, transport, and loading by us optionally available To avoid potential misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition descriptions, year of manufacture and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the rule is: "purchased as seen" Images and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location