Vertikal mesin broaching 16to

Arthur Klink

Kondisi: bekas, Artrhur Klink RSH1 - 1250 Mesin Gerinda Broach 09.2009, baru 1979, meja 200 x 1800, elektromagnet 200 x 600, dengan perlengkapan/aksesoris terkait, tanpa lemari. Predpfx Aszc Iq Isqvjb

Kondisi: baik (bekas), Tahun pembuatan: 2009, Diameter roda - maks. 1200 mm Lebar roda 260 mm Modul - maks. 16 Modul - min. 0,5 Langkah (stroke) 270 mm Jarak spindle/meja 920 mm Penahan roda pemotong - SK Kontrol Bosch MTX Diameter meja 900 mm Diameter benda kerja maks. untuk roda gigi dalam 1200 mm Jumlah langkah - tanpa tahapan 50-1000 langkah/menit Diameter spindle 125 mm Lubang meja 320 mm Jarak sumbu Min/Maks 0-820 Daya penggerak kepala pemukul 30 KW Kebutuhan daya total 72 KVA Berat mesin sekitar 24 t Kebutuhan ruang sekitar 6,5x2,9x4 m M8160132 Pjdpfewzmpzsx Aqvorb

Tahun pembuatan: 1984, Kondisi: bekas, nomor mesin/kendaraan: 16700, Color: white With magnetic strip conveying, automatic feed, Tensile force: 10 t Stroke: 1200 mm Prjdpfxebrclqs Aqvsb Weight: 6 t Footprint: approx. 160 x 140 cm

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Prsdpfscc D Ddox Aqvjb Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] Pedeuhb Uhepfx Aqverb EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Year of manufacture: 1990 Prodpfx Aqjlpadysvob Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Remarks: High-performance production broaching machine for large-scale series production with high cutting speed!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Pjdpfxjr A Hdgs Aqvjrb Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Direct contact details for us as well as further information can be found in the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 1998, Rincian teknis: Modul - maks.: 7 Berat mesin sekitar: 5 t Diameter ulir penggiling: 280–350 mm Lebar ulir penggiling: 84–104 mm Prodpfxozgw I No Aqvjb Jumlah gigi - min.: 6 Jumlah gigi - maks.: 600 Diameter lingkar kepala terbesar yang diizinkan: 360 mm Berat benda kerja maks.: 60 kg Termasuk turboseparator, portal pemuatan, alat penyeimbang dan pengasahan generasi terbaru serta berbagai aksesori.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 Predpfjdffzfox Aqvob General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Prodpfx Aqoixntwjvsb Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! Prjdpfx Asd Iin Hsqvsb High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Tahun pembuatan: 1971, Kondisi: sangat baik (bekas), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Podpfx Aqshpqquevsrb Weight: 4.8 t

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Predjr A Hcbopfx Aqvjb Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: baik (bekas), The listed driven tools VDI 50 are designed for a tool turret by SAUTER and are in good condition and fully functional. These tools have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufactured by NACKE + WTO, VDI 50 for SAUTER brand tool turret: Item No.: XVI 24275 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Podebql S Hopfx Aqverb Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Prodpjgyd T Ejfx Aqveb Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz