Internal mesin Broaching

Arthur Klink RISZ 10x1000x400

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter Kwedpfsxmhdnsx Ac Hju - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, de-hu-001 Kwedpovxllkefx Ac Hju

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle Kodpfx Aerz Nflsc Hjwu - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) Kedpfx Aod Nb A Njc Hjwu - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: bekas, Tahun pembuatan: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 mm/min (x-axis) Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight (approx.): 1.15 t Required space (approx.): 1.5 x 1.45 x 2.2 m Product Information – "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Spindle Speed" The Optimill MF 4 Vario is a multifunctional drilling and milling machine designed for professional applications. It features a continuously variable electronic drive with frequency inverter "Made in Germany" and a digital 3-axis position display DPA 21. Heavy-duty, massive construction made from high-quality Meehanite cast iron. High concentricity accuracy thanks to tapered roller bearings, less than 0.01 mm measured at the quill. Automatic quill feed. Clockwise/counterclockwise rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant system. Y-axis features a flat guideway and a large travel of 400 mm. Motorized table height adjustment (Z-axis) with rapid traverse. Equipment details: - Frequency inverter, quality made in EU - Drilling/milling head - Tiltable ±45° - Overhang 200–680 mm - Stepless speed control, especially wide speed range - Drill depth stop, adjustable with millimeter scale, front readable - Protective screen, height-adjustable, generously sized - Cross table, heavy-duty, generously sized, precision-machined surface - Motorized table height adjustment (Z-axis), adjustable end stops - OPTI control panel with integrated control desk - Integrated digital position display DPA 21 with rpm indicator - X-axis motorized table feed, stepless speed regulation, rapid traverse, right/left-hand rotation Technical Data: Length (product): 1,500 mm Width/Depth (product): 1,450 mm Height (product): 2,200 mm Kwedpet U Rm Isfx Ac Heu Weight (net): 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Max. cutter head size: 100 mm Max. end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle spindle mount: ISO 40 DIN 2080 Vertical spindle speed range: 8 ranges, electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle–horizontal table min.: 40 mm Distance vertical spindle–horizontal table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. table load: 275 kg Vertical spindle main drive motor: 3 kW Coolant pump drive motor: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity in steel (S235JR): 32 mm Continuous drilling capacity in steel (S235JR): 28 mm Vertical spindle rotation range, milling head Z–X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 8.185 h, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, en Kwsdpex D Dyajfx Ac Hsu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4E184001, diameter putar di atas sled silang: 430 mm, panjang pembubutan: 670 mm, diameter pembubutan: 220 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.300 rpm, berat keseluruhan: 4.300 kg, Mesin bubut CNC hard turning bekas dengan spindle tambahan Merek: EMCO Tipe: Emcoturn 45E Tahun pembuatan: 2018 Kwjdew Rrvwopfx Ac Hju Jam operasi rendah Kontrol: Siemens 828D Jumlah alat: 12 unit berpengerak Kecepatan maks.: 0-6000 rpm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 7.000 kg, Mesin ini dikonfigurasikan dengan 4 sumbu CNC sepenuhnya elektronik dan dilengkapi perangkat lunak terintegrasi yang menghasilkan program otomatis. Deskripsi: Diameter roda gigi maksimum: 400 mm Lebar roda gigi: 76 mm Kjdewvbqispfx Ac Howu Langkah: 82 mm Putaran: 150 - 700 rpm Modul: min. 0,5 mm Modul: maks. 6 mm Berat mesin: sekitar 7500 kg Perlengkapan listrik: – Tegangan operasi: 380/400 V – Proteksi: 20 kVA Mesin dengan CNC Siemens 808D baru Drives dan Servomotor Siemens Update terbaru 2025 Layar untuk pembuatan program otomatis Siklus otomatis NR12 Termasuk: Konveyor serbuk Tangki pendingin Pelumasan otomatis Kontrol tekanan digital Pemandu hidrostatis

Kondisi: bekas, Technical Details: Number of controlled axes: 6 Workpiece weight: 20 t Operating hours: 4290 h Control system: YASKAWA Total power requirement: 35 kVA Total weight (approx.): 2000 kg Dimensions (L x W x H) - Robotic welding cell: 2.7 x 1.1 x 2.0 m Control cabinet dimensions: L: 700 x W: 800 x H: 2000 mm Welding robot system consists of: Robot specifications: - 6 axes of movement - Max. payload: 20 kg - Working envelope: rotational radius = 1717 mm, vertical reach = 1417 mm, horizontal reach = 2072 mm - Rotation axes arm: S-axis rotation = +/-180°; L-axis lower arm = +1550° / -110°; U-axis upper arm = +255° / -165° - Wrist axes: R-axis roll = +/-200°, B-axis pitch/yaw = +230° / -50°, T-axis rotation = +/-360° - Axis speeds: S-axis and L-axis = 170°/s; U-axis = 175°/s; R-axis and B-axis = 355°/s; T-axis = 525°/s - Permissible torque: R-axis and B-axis = 39.2 Nm; T-axis = 19.6 Nm Welding unit specifications: - Fronius, TIG welding (DC & AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, protection class IP23 Positioner specifications: - Table diameter Ø 600 mm, 360° rotation, 90° tilt to the right/left Wire feed specifications: - Fronius, type KD 7000, feed rate 0.2 - 22 m/min, protection class IP23, voltage U1 230V Kwedpfx Asu Nwfbsc Hsu Hand pendant control Control cabinet in stock.

Kondisi: baik (bekas), Tahun pembuatan: 1972, Mesin bubut LZ Produsen: HEIDENREICH & HERBECK, Tipe: 21RO, Tahun: 1972 dengan holder quick change Parat 10 pcs, dokumentasi mesin, pengukur ulir, ujung senter, chuck Forkardt 250 mm. Diameter pembubutan di atas ranjang: 430 mm Diameter pembubutan di atas penyangga pelan: 255 mm Jarak antara senter: 1000 mm Panjang pembubutan: 750 mm Kecepatan putar spindel: 19-2000 rpm, motor 5,5 kW Lubang spindel: 56 mm Data teknis lebih lanjut lihat datasheet Kebutuhan ruang: panjang 2900 mm, lebar 1100 mm, tinggi 1300 mm, berat sekitar 1750 kg. Dokumentasi mesin tersedia Kwjdpet Ipi Ijfx Ac Hju Perlengkapan pendingin ada, pelindung chip belakang Mesin dalam kondisi baik, dapat diperagakan dengan daya listrik.