Oven pemanas awal, oven udara panas, oven sirkulasi hingga 750°C, oven udara panas, oven sirkulasi,

ARTUR NOLZEN TL30/30/50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring table dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection possible. Knjdpfx Adou Ur Sqewjd

Tahun pembuatan: 1994, Kondisi: baik (bekas), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Includes belt filtration system - Includes coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Knsdpfxjk Ixl As Adwed Good condition, fully functional. The machine can be inspected and tested under power on-site. Shipping available internationally. Inspection: As a general note, to avoid any misunderstandings, the item can be viewed and tested under power prior to purchase. Please ask any questions before buying to avoid ambiguities. For general inquiries or to schedule an inspection appointment, I am always available at the phone number listed below or above. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipping via freight forwarder.

Kondisi: baik (bekas), 1 Kjdeh Hx Nhjpfx Adwend

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Knedpfxot Tqrne Adwjd Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 800 mm, rentang pengukuran sumbu Y: 1.800 mm, rentang pengukuran sumbu Z: 500 mm, masa garansi: 12 bulan, tinggi total: 3.000 mm, jenis arus masuk: tiga fasa, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available – please feel free to contact us. Knodpfx Ajvxhzuodwed Zeiss | UMC850 with Renishaw PH10 and SP25 scanning system, including Renishaw metrology software MODUS Retrofitted coordinate measuring machine equipped with the latest Renishaw technology Year of manufacture: approx. 1990 / Modernized in 2022 - clad in light grey Measuring range XYZ: 800 x 1800 x 500 mm Measurement uncertainty MPE (E0): 2.6 + L/300 µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 rotary indexing head with SP25-2 scanning system, incl. FCR25-L6 (6-port) stylus changer - MODUS measuring software, latest version, with CAD STEP import including 1 year software maintenance - PC system with Windows 10 and 2 x 27" TFT monitors, NEW, including height-adjustable desk - Control cabinet with state-of-the-art safety technology - Base plate We are happy to customize the configuration according to your requirements. Optional service package available upon request: Delivery to site (ex works) | Commissioning | Inspection | Accuracy certification according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment available on request.

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: FARO-PT08, Well-maintained Faro Platinum measuring arm with 7 axes Measuring arm length: 8ft (approx. 2.4m) Accuracy: 30 / 43µm Knjdpfxolwktps Adwod Last calibration: 2012 Includes new Aberlink 3D software (free updates) Windows 10 HP notebook (used) Optional: Inca Premium software (+ €4,000) or others (Polyworks, PcDmis, MCosmos, etc.) Measuring table 1500x1000 available on request Software training as needed

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Kjdpjt Hw S Isfx Adwend Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice.

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Complete system – available immediately Powder coating booth KPZ-4 PSN Knsdpofnuklsfx Adwsd Automatic washing system (2-zone) Gas convection oven SGS-800 Manual overhead rail system Price starting from €99,999.00 net

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Knjdpst Hw Nyefx Adwod Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800 x 1170 x 2280 mm Weight: 500 kg Knsdpfx Adjvz Hq Tewjd Total power requirement: 1 kW Martina 85 Hot Air Furnace The MARTINA series of hot air furnaces represent an ideal solution for energy utilization in woodworking industries and crafts enterprises. These units have been developed especially for heating large utility spaces, such as workshops and production areas in both craft and industrial settings. Thanks to their design, these hot air systems do not require long preheating times and are capable of quickly heating joiners’ and carpenters’ workshops, as well as other manufacturing facilities. The fuel used includes solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE, the Italian Presidential Decree No. 459 of July 24, 1996, as well as the plant safety directive 89/392 CE. All models in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous ventilation operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Airflow capacity: 6,400 m³/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required flue draught at nominal output: 0.18 mbar - Heatable space: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet (connector) diameter: 200 mm - Chimney diameter (reference value): 250 mm - Efficiency: 85-90% - Chimney draught: 16 Pa - Flue gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical details, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located on the rear lower section of the furnace. A maximum pipe length of 20 meters per air outlet is permitted for air distribution.