Oven udara panas

Compactsystem MARTINA 85

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² Rsdpfx Amevz Hq Hjuju - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Volume: 1000 l, max. temperature: 750°C, heating power: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. On-site inspection possible. Expected to be available from October/November 2025. Rjdpfx Amsw Emyzsueu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Viessmann Vitoplex 100 LS with Weishaupt WM-G10/4A Redpotrl Skjfx Amusu

Kondisi: bekas, 4 stainless steel tank containers, used Capacity: 35 cbm Order number: 4244 Material: 1.4404/1.4401 Rjdpfx Amjv Dtgasusu External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data (as per type plate): 1 tank = -0.4/+4 bar operating pressure, 150 °C 1 tank = -0.4/+3 bar operating pressure, 110 °C 1 tank = +3 bar operating pressure, 120 °C 1 tank = +4 bar operating pressure, 130 °C Design: Cylindrical horizontal tank mounted in 20' transport frame with dished ends Half-pipe heating coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating overpressure 50 mm insulation around the cylinder and end caps Connections: 2 manways DN 500 on the top centerline plus various additional connections Discharge outlet at the end face Weight: approx. 4.4 t Available on request: Frame for 4 tank containers, manufactured from painted mild steel, delivered disassembled for transport External dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height Surcharge upon request.

Kondisi: baik (bekas), A-100730-Horizontaltank 16m3 Horizontal tank, 16,000 L Rjdpfxoiiyufs Amusu Material: Stainless steel AISI 316 Dimensions: Ø 2,530 mm x H 2,900 mm x L 3,800 mm Manhole at front

Kondisi: bekas, kapasitas tangki bahan bakar: 128 l, Tahun pembuatan: 2018, jam operasional: 8.470 h, Tahun pembuatan: 2018 Berat kosong: 9.000 kg Rodpfx Amjxqfc Njuju Dimensi (P x L x T): 699 x 220 x 257 cm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, New KAESER TB19 Refrigeration Compressed Air Dryer, with energy-saving SECOTEC control system and electronically controlled condensate drain. Year of manufacture: 2024 Rodpod S S T Dofx Amusu Technical data: - Volume flow: 2.10 m³/min - Pressure dew point: 3°C - Overpressure: 3 to 16 bar - Ambient temperature: +3°C to +43°C - Max. compressed air inlet temperature: +55°C - Compressed air connection: G 1" - Dimensions (W x D x H): 620 x 540 x 963 mm - Weight: 108 kg Electrical supply: 230 V / 1 / 50 Hz Visit our showroom in Erlangen. On over 450 sqm of exhibition space, you will find a large selection of new and used compressors.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Patented electric heating solution for efficient and comfortable heating. Rodjqvmcpspfx Amuou Heating output: 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) Suitable for approximately 10–35 sqm area at around 2.5 m ceiling height Connected load: 11.8 A Dimensions: 54 x 29 x 80 cm Weight: 15 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Rodpfxevz Hqyo Amueu Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal Redpfx Asvz Hqtsmuju - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.