Meja putar pembungkus palet dengan timbangan

ATLANTA - mit integrierter Waage SYNTHESI - Palettenwiegesystem

Exhibition machine, like new.

SYNTHESI with integrated scale
Pallet weighing system integrated into the machine

FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE)
Film tension electronically controlled via control unit
Film specification: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm
Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ

Options available:
Ramp
OPRS film carriage with 200% pre-stretch
Turntable 1650 mm
Wrapping height up to 3500 mm

TECHNICAL DETAILS:
Turntable 1500 mm (optional 1650 mm)
Wrapping height (including pallet) 2,200 mm
Height detection via photoelectric sensor
Frequency-controlled turntable drive (soft start / start/stop)
Frequency-controlled film carriage speed upward/downward
Cjdjwtc Dljpfx Adpsrh
Acoustic signal at wrapping start and at end of cycle
Emergency stop switch as per CE regulations
Turntable always stops in the same home position
Anti-fall device for the film carriage
Pushbuttons for machine power-on, start & stop function & reset as per CE standards Ø 22 mm

ADJUSTABLE PARAMETERS VIA CONTROL PANEL
All functional parameters adjustable via display
F00 – Display lock (program change lock)
F02 – Infinitely variable turntable speed 5-12 rpm
Film carriage speed upward and downward independently adjustable
F03 – Film carriage speed upward: 1.3 to 5.4 m/min
F04 – Film carriage speed downward: 1.3 to 5.4 m/min
F05 – Number of wraps at pallet base (1 - 10 wraps)
F06 – Number of wraps at pallet top (1 - 10 wraps)
F09 – Delay for photocell wrapping height
F13 - F16 – Film tension for base & top wrapping / upward & downward passes independently adjustable
F62 – Ergonomic height for film change
Film consumption display (optional)

ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL
6 programmable wrapping programs
F01 - 1 – Cross-wrapping (upward/downward)
F01 - 2 – Simple wrapping (only upward or only downward)
F01 - 3 – Pushbutton for manual functions
F10 - F11 – Wrapping cycle with preset start and stop heights
F12 – Wrapping to a preset height (with height sensor deactivated)
F22 / F23 – Wrapping cycle for top sheet application
F29 – Soft start cycle for applying edge protection
F30 - F31 – Wrapping cycle with reinforcement and adjustable wrap count
Soft start to reduce film tearing on sharp pallet edges
Wrapping cycle with manual or motorized rope formation (optional)
Reinforcement cycle via pushbutton

Further units available ex stock Ludwigsburg.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.