Pembungkus Pallet Pembungkus Peregangan

ATLANTA SYNTHESI

Tahun pembuatan: 2023, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S230965, Pembungkus palet semi-otomatis dengan panel sentuh, 6 program yang dapat disimpan + 1 program dasar: Kereta film FM dengan rem mekanis pada roller pengarah Kerangka dasar dengan meja putar Ø2400, berat muatan maksimum 2.000 kg Rampa naik Ø2400 Rampa diperpanjang dan diperkuat untuk Ø1500 hingga Ø2400 Tiang untuk ketinggian pengemasan 2200 mm Djdpfx Agexfimhj Ujcn Colokan listrik 2P+PE 250Volt 16A, sudut 180 derajat, hitam Sensor cahaya laser untuk pendeteksian tinggi digunakan pada film hitam atau produk berwarna hitam atau mengkilap untuk pembungkus palet merek ATLANTA (Synthesi, Mytho Easy, Mytho, Sfera Easy, dan Sfera)

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Dcedpfxev Npx Nj Ag Usn Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Dijual Atlanta Avvolgitore Synthesi pallet wrapper putar tahun 2016. Mesin dalam kondisi baik dan berfungsi normal. Opsional tersedia dengan ramp. Harga termasuk ramp: €2.550,- Masih banyak (robot) pallet wrapper lain yang tersedia. Silakan tanyakan stok mesin yang ada. Untuk informasi lebih lanjut silakan kirim pesan. Video mesin saat beroperasi dapat dikirim melalui WhatsApp. Dedpfxoxcb Hzs Ag Uocn Kami juga menjual stretch film. Untuk detail lebih lanjut, jangan ragu untuk menghubungi kami. Tukar tambah pallet wrapper (bahkan yang rusak) dimungkinkan. Lihat juga iklan saya yang lain. Kata kunci: pallet wrapper, mesin wrapping, mesin bungkus pallet, robot wrapping, stretch film, mesin pembungkus otomatis.

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiWaage02, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Options available: Ramp OPRS film carriage with 200% pre-stretch Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optional 1650 mm) Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start / start/stop) Frequency-controlled film carriage speed upward/downward Acoustic signal at wrapping start and at end of cycle Emergency stop switch as per CE regulations Turntable always stops in the same home position Anti-fall device for the film carriage Pushbuttons for machine power-on, start & stop function & reset as per CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 – Display lock (program change lock) F02 – Infinitely variable turntable speed 5-12 rpm Film carriage speed upward and downward independently adjustable F03 – Film carriage speed upward: 1.3 to 5.4 m/min F04 – Film carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1 - 10 wraps) F06 – Number of wraps at pallet top (1 - 10 wraps) F09 – Delay for photocell wrapping height F13 - F16 – Film tension for base & top wrapping / upward & downward passes independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping programs F01 - 1 – Cross-wrapping (upward/downward) F01 - 2 – Simple wrapping (only upward or only downward) F01 - 3 – Pushbutton for manual functions F10 - F11 – Wrapping cycle with preset start and stop heights F12 – Wrapping to a preset height (with height sensor deactivated) F22 / F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for applying edge protection F30 - F31 – Wrapping cycle with reinforcement and adjustable wrap count Dedswtc Dlepfx Ag Ujcn Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton Further units available ex stock Ludwigsburg.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Maximum pallet dimensions: 800 x 1,200 mm Maximum load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Individually frequency-controlled carriage speed up/down Acoustic signal at start of wrapping and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Anti-drop device for film carriage Push buttons for power on, start & stop function, and reset in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 – Display lock for program modification F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed up and down can be set independently F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13 – F16 – Film application tension for base & top wrap / ascent & descent can be set independently F62 – Ergonomic height for film replacement Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrap (up or down only) F01-3 – Push button for manual operation F10–F11 – Wrapping cycle with preset start and stop heights F12 – Wrapping to a stored height (with deactivation of height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for installation of edge protectors F30–F31 – Reinforced wrapping cycle with adjustable wrap count Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motor drive string formation (optional) Reinforcement cycle via push button Djdev Iqyrepfx Ag Uscn FILM CARRIAGE TYPE “OPRS” motor-driven pre-stretch system 200%. Optionally with easy-change gear set 150%–200%–250% Film specification: Max. outer diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power supply: 230 V – 1L+N+PE – 50 Hz Total power consumption: 1.2 kW / 6A Options available: FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio fixed at 200% Turntable sizes up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for black products Cutting device etc. Further units available ex-stock Ludwigsburg. Images may show optional equipment subject to surcharge.

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23SynthesiLow05, Demo machine, as new. SYNTHESI with flat turntable Turntable height 25 mm Short ramp 500 mm long TECHNICAL DETAILS: LOW PROFILE Turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage lift speed upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power, start & stop, and reset in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL Dedpsv Iqt Eefx Ag Ujcn All functional parameters adjustable via display F00 - Display lock for program changes F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be adjusted independently F03 - Carriage lift speed upwards from 1.3 to 5.4 m/min F04 - Carriage lift speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Delay of photocell for wrap height F13–F16 - Film application tension base & top wrapping / ascent & descent individually adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (photocell height sensing disabled) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start function to reduce film tears on sharp pallet edges Wrapping cycle with manual or powered rope-threading (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch set to 200% Film application tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection: 230V – 1Ph+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Additional machines available from stock in Ludwigsburg.

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp, 500 mm long Manual roping device mounted on the frame at the pallet for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Dcedpsv Iqucjfx Ag Uen Acoustic signal at wrapping start and cycle end Emergency stop switch as per CE regulations Turntable always stops at initial home position Fall protection for film carriage Pushbuttons for machine power-on, as well as start & stop function & reset, Ø 22 mm, according to CE standards ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program changes F02 - Continuously variable turntable speed 5–12 rpm Carriage speed independently adjustable for up/down F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Photocell delay for wrapping height F13–F16 - Film application tension for base/top wrap and up/down direction, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) PROGRAMMABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (up/down) F01 - 2 - Simple wrapping (up only or down only) F01 - 3 - Pushbutton for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio preset to 200% Film application tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm; height = 500 mm; core Ø76 mm Standard power supply: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Further machines available ex-stock Ludwigsburg.