Kompresor sekrup

Atlas Copco GA 37 VSD s FF

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 100 h, Kami berspesialisasi dalam rekondisi blower, kompresor, dan pompa vakum. Kami memperbaiki peralatan dari produsen seperti: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Kami juga menawarkan layanan sewa blower dan kompresor. Kami beroperasi di seluruh Eropa dan sekitarnya. Nodjn Tntqjpfx Am Aowf

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Nwjdpfx Aou Rptysm Asf Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Misinvestment by a corporation. The machine is brand new and unused (already delivered). There are no lead times—immediately available. A truly rare opportunity. Machine type Horizontal Machining Center with Pallet Changer Series NHX 8000 Control Siemens S840Dsl with CELOS Measuring System Fully Closed Scale Feedback (X/Y/Z) Machine Concept DCG Nsdpfjxizdajx Am Aewf Travel X/Y/Z 1,400 / 1,200 / 1,350 mm Rapid Traverse X/Y/Z 50,000 mm/min Pallet System Pallet Changer, Turn-Type Number of Pallets 2 Pallet Size 800 × 800 mm Pallet Load 2,200 kg [optional 3,000 kg] Max. Workpiece Ø/H 1,450 mm / 1,450 mm Pallet Change Time 16 s B-Axis Direct Drive Minimum Indexing 0.001° Max. Speed 100 rpm Spindle powerMASTER Speed 16,000 rpm Power 85/50 kW (10% DC / Continuous) Torque 549/279 Nm Mounting HSK-A100 Cooling Centralized Spindle Cooling Internal Cooling optional CTS 7 MPa Tool Magazine Chain Magazine with 60 Stations [optional 100/120] Rack Magazine Options 180 / 240 / 330 Stations Max. Tool Diameter with Adjacent 110 mm Max. Tool Diameter without Adjacent 320 mm [if >10,000 rpm: 230 mm] Max. Tool Length 800 mm Max. Tool Weight 30 kg Tool-to-Tool 1.9 s Cut-to-Cut 5.0 s Equipment / Options Workpiece Probe Tool Measurement System Laser Monitoring optional High-Pressure Coolant 7 MPa optional Chip Conveyor Full Enclosure with Roof Dimensions n.a. Weight n.a. Connection Data n.a.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 6.000 rpm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 32.000 W, produsen pengendali: SIEMENS, model controller: C200-sl, jumlah sumbu: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning operations. This machine is ideal for precision and efficiency in metalworking, making it a valuable addition for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for more information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Machine Advantages • Control: Based on Sinumerik 840D solutionline (sl) with Sinamics S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operator interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 inside the control panel). Network capability for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (Profisafe). • Turret mechanism: Hydraulic locking, AC motor with helical gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-grooves for increased repeatability. Driven tools possible at every station (can only rotate in the working position). • Cooling unit: 13 kW for hydraulics, spindles, and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, glycol 25%). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter tank, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Bar feeder interface: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with selector for finished parts/remnants. Additional Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. main fuse: 100A Main Drive Main spindle and counter spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston surface pressure: 57cm² Nsdpfxeyyuvtj Am Aowf Piston area, clamping: 57cm² Max. clamping force: 45,600 N Max. draw force: 45,600 N C-Axis: Drive: Spindle hollow-shaft motor; Angle measuring system directly on the spindle Positional dispersion (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Head Tool Carrier 1 X-axis travel: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5,000N Z-axis travel: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5,000N Y-axis travel: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5,000N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5,000N Z-axis travel: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5,000N Y-axis travel: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5,000N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Kondisi: bekas, Tahun pembuatan: 2014, INDEX C200 CNC Lathe 3 Turret 2 Spindle Kontrol Fanuc: 31i-Model B Pemegang Motoris Aksial: 6 pcs Pemegang Motoris Radial: 13 pcs Njdpfx Amexxm Hfj Ajwf Pemegang Alat: 11 pcs Pemegang Boring Bar: 21 pcs Pin: 1 pcs Bushing & Sleeves Loader: Ø51/Ø46/Ø41 Bushing loader MBL baru: 2 set 2 skala optik direkondisi oleh HEIDENHAIN 1 Box Lengan Portal soket Balluff dengan berbagai sensor, saklar induksi, dan kabel Belt motoris: 6 pcs Set bushing anti-vibrasi untuk loader MBL Waktu operasi: On time: 37.946 Jam hidraulik: 37.500 Waktu produksi: 26.500 Dengan MBL Bar Feeder

Kondisi: baru, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2,500 kg - Tank capacity approx. 100 liters - Hand protection grid in the area of the control panel and on the opposite side - Color scheme: body RAL according to customer specification Protection grid/cutter bar RAL 1028 melon yellow Made to order Njdpfx Asftnt Nom Ajwf Price and further information on request

Kondisi: baru, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor swing diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Nwsdjbq St Hepfx Am Aof Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen basket locking for contaminant discharge Weight: approx. 18,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Data teknis: Tekanan 10 bar Aliran udara 1080 l/menit Tegangan 400 V Daya penggerak 7,5 kW Berat 431 kg Tingkat kebisingan 63 dB(A) Outlet udara 3/4" Dimensi (PxLxT) 1950 x 690 x 1700 mm dengan pengering pendingin terintegrasi, pembuangan kondensat otomatis, pemisah oli-air Nodsxq Elwspfx Am Aswf

Kondisi: siap digunakan (bekas), daya motor 11 kW tekanan kerja 10 bar Nwsdpfsnr Hhiex Am Aof kapasitas 1,59 m3/menit tabung

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 139640,