Laser cutting machine

Sheet Laser Cutting Machine VS-3015CE 6KW

Kondisi: baik (bekas), Tahun pembuatan: 2015, Atlas Copco Kompresor Sekrup Bebas Oli dengan Pengering Udara Terintegrasi Model SF2+FF 7,75 bar / 112 PSI Tahun 2015 Chodpfey Iplfex Anpsd 400 volt tiga fasa, 2,2 KW / 3 HP, 2885 RPM 8,9 CFM / 4,21 ltr/dtk Penggunaan sangat minim Bekas fasilitas farmasi

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8153336470, berat keseluruhan: 616 kg, laju aliran volumetrik: 399 m³/jam, tekanan (min.): 4 batang, tekanan (maks.): 13 batang, tingkat kebisingan: 67 dB, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, We are a company specializing in the compressed air industry for over 20 years. Our professional service level and the high-quality products we offer—market-proven—guarantee a successful partnership with you. We offer a NEW Atlas Copco GA37VSDs FF rotary screw compressor (variable speed drive, with integrated dryer). This machine is equipped with a frequency inverter (VSD), built with the latest technologies, which translates into greater efficiency and performance: - On average, 20% lower specific energy consumption (SER) than previous GA VSD series models. - The eco-friendly and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models operating on idle. - Additionally, performance increase (FAD) of up to 12% regardless of energy savings. - Efficient fan motor (ERP 2015 compliant) reduces energy usage and noise level. - The highest efficiency iPM motor (up to 94.5%), exceeding IE3 efficiency levels. Built to work hard for your success. The GA series oil-injected rotary screw compressors provide market-leading efficiency, high productivity, and low maintenance costs—even under the toughest conditions. Technical Data: - Capacity at 4 bar: 15.69–13.75 l/s / 0.94–7.85 m3/min - Capacity at 7 bar: 15.67–129.35 l/s / 0.94–7.76 m3/min - Capacity at 10 bar: 15.68–110.79 l/s / 0.94–6.65 m3/min - Max pressure: 10 bar (13 bar version available on request) - Voltage: 400 V - Motor: 37 kW - Noise: 67 dB(A) - Weight: 616 kg - Motor with internal permanent magnets (iPM) - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic condensate drain with zero compressed air loss - Elektronikon controller - Inlet valve - VSDs module - OEM code: 8153336470 Cjdpfswlp Hdox Anpjhd If you are unsure whether this machine is suitable for you, or can’t find the right compressor, CALL US! We can advise you on choosing the right equipment. Feel free to check out our full product range.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 80 kW (108,77 hp), jumlah sumbu: 2, berat keseluruhan: 172 kg, panjang meja: 900 mm, lebar meja: 600 mm, Perlengkapan: dokumentasi / manual, A medium-sized CNC laser machine designed for continuous operation in small, medium, and large-scale production. This model features a lift table, providing you with additional production versatility. The Wattsan laser cutter will be an indispensable asset for your business—efficient and fast. The Wattsan 6090 LT can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, and more. The lift table function allows the working area to be lowered by up to 160 mm, enabling installation of a rotary device to diversify your production. Additionally, it includes a waste collection tray, making your tasks significantly easier. Contact our consultants for further details! Features of the Wattsan 6090 LT: - Working area: 600 x 900 mm - Laser power: 90–100 W - Table lowering depth: 160 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 1030 x 1490 x 670 mm (+ 315 mm if on wheels) - Package dimensions: 1110 x 1580 x 755 mm Chedpfxeiim Unj Anpjd - Weight: 230 kg Virmer not only provides premium machines, but also full service and delivery. Our engineers and consultants are ready to answer all your questions and, if necessary, provide video support. Wattsan machine owners also benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We provide not only laser engravers, but also metal cutters, welding machines, markers, and cleaning systems. Wattsan is a Chinese manufacturer with nearly 15 years of experience in laser machinery, continuously evolving with the help of customer feedback. Thanks to ongoing improvements, Wattsan has implemented over 50 modernizations, making their machines more reliable, precise, and powerful—empowering you to take your business to the next level. WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for a laser or CNC milling machine, we’re happy to assist. Discover our wide range of machinery and accessories: - CO2 laser machines - Metal laser cutters - Fiber metal lasers - Fiber laser engraving machines - CNC milling machines for metal - Wood milling machines - CNC routers - Laser engravers - Laser plywood cutters - Metal laser cutters - Laser markers - Lenses - Chillers - Machine cooling systems - S&A coolers - IPG laser, MAX Photonics, Raycus - Compressors - Rotary devices - Laser machine mirrors

Kondisi: baru, Tahun pembuatan: 2025, Dry rotary vane vacuum pump available in stock. Marpa Vacuum pump. Completely brand new unit. 12 months warranty. Rated flow: 140 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. For any questions, please contact us. Cedpfx Anoftzhnspehd

Kondisi: baru, Tahun pembuatan: 2025, Oven powered by natural gas for powder coating applications. The oven is designed for powder coat polymerization. It is equipped with the latest heat exchanger, made entirely from stainless steel AISI 1.4301, ensuring a very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply: 400V, 50Hz • 2 x Riello 90 kW burners • Operating temperature: 210°C • Maximum temperature: 230°C • High-grade insulation: 150 mm • Partition wall in the middle of the oven, allowing for a 50/50 ratio Equipment: • Overhead conveyor, • Hot air circulation (uniform temperature throughout the oven, accelerated heating process for parts), Codpfx Ansfktipjpshd • Safe open/close locking system, • Timer module, • Thermoregulator (controls and maintains the correct internal temperature), • For easy transport, the oven is equipped with rails. Choose BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX Sp. Z O.O. products are CE-certified. We offer our own transport – prices are individually calculated per order. We issue invoices with VAT indicated. Short delivery times! Option to order machines in various individual configurations and sizes! Feel free to contact us.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), de-20240622-01 Cjdpfx Anexg Rhvspehd

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees Cedpov T Nqasfx Anpjhd - Max. cutter diameter: 145 mm - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Kondisi: baik (bekas), Rotary vane vacuum pump, oil-lubricated, 2-stage Condition: Completely overhauled Warranty: 12 months Manufacturer: Leybold Model: Trivac D16B Pumping speed: approx. 16 m³/h Ultimate pressure: approx. 5 x 10⁻³ mbar Motor: 400V three-phase Operating fluid: mineral oil Accessories: Operating manual Oil mist separator optional Delivery time: by arrangement (subject to prior sale) Cedpobgdifjfx Anpshd Spare parts, operating fluids, or alternative pumps available on request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 6.361 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: 840D ShopMill, panjang benda kerja (maks.): 900 mm, lebar benda kerja (maks.): 560 mm, tinggi benda kerja (maks.): 630 mm, berat benda kerja (maks.): 600 kg, tinggi total: 3.000 mm, panjang total: 4.000 mm, lebar total: 5.000 mm, lebar meja: 900 mm, panjang meja: 560 mm, beban meja: 600 kg, berat keseluruhan: 5.000 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 6.361 h, hidung spindel: SK40 (DIN69871), jumlah spindel: 1, jumlah slot dalam magazin alat: 30, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mesin DMG MORI ecoMill 600V buatan Jepang ini kami ambil dalam kondisi operasional langsung dari produksi dan masih dalam keadaan bersih. CMX 600V (ecoMill 600V) dilengkapi dengan konstruksi rangka-C (konfigurasi klasik) dan meja yang dapat bergerak (sumbu-X), dirancang untuk pekerjaan milling umum/serbaguna. Csdpfjy Dg Eujx Anpehd Opsi & aksesori tambahan: - Siemens 840D SlimLine termasuk simulasi 3D. - PROGRESSLine (menampilkan sisa waktu produksi dan jumlah produk untuk satu proses pemesinan penuh). - Konveyor serbuk serpihan - Pistol pembilas - Persiapan untuk pendinginan internal. - Dokumentasi asli

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected Load: 15.3 kVA Rated Current: 25.6 A Short-Circuit Resistance: 2.5 kA Max. Turning Diameter: Ø 200 mm Max. Turning Diameter x Length: Ø 200 x 380 mm Swing Over Bed: Ø 450 mm Swing Over Cross Slide: Ø 300 mm Workpiece Weight (one-sided support): 120 kg Spindle Diameter: Ø 100 mm Spindle Nose: JIS A2-6 Spindle Bore: Ø 66 mm Spindle Speed Range: stepless Spindle Speed: 75 to 3000 rpm Number of Tool Stations: 12 Turret Type: Multitasking V12 Turret Tool Mounting External Turning Tools: 20 x 20 mm Tool Mounting Internal Turning Tools: Ø 32 mm Driven Tool Speed: 6000 rpm Travel Distance Z-Axis: 400 mm Cedpfxjy R A N As Anpjhd Travel Distance X-Axis: 165 mm Travel Distance Y-Axis: 80 mm Feed Rate Range: 0.001 to 1000 mm/rev Rapid Traverse Z-Axis: 25000 mm/min Rapid Traverse X-Axis: 20000 mm/min Rapid Traverse Y-Axis: 10000 mm/min Tailstock Quill Diameter: Ø 55 mm Tailstock Quill Stroke: 80 mm Machine Height: 2040 mm Installation Area: 2120 x 1750 mm Machine Weight: 4800 kg Year of Manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.