Kompresor sekrup

Atlas Copco GA 55 VSD FF

Kondisi: baik (bekas), Tahun pembuatan: 2013, berat keseluruhan: 1.519 kg, daya: 75 kW (101,97 hp), laju aliran volumetrik: 14,85 m³/jam, tekanan (maks.): 12,8 batang, Kompresor Udara Atlas Copco GA75VSD FF Data Teknis Lsdpjxk U Alsfx Ag Rehd Pabrikan: Atlas Copco Airpower Tipe: GA75VSD FF Tahun Pembuatan: 2013 Tekanan Maksimum: 12,8 bar Kapasitas Aliran: 14,85 m³/menit Daya Motor: 75 kW Kecepatan Motor: 3000 rpm Berat: 1519 kg Catu Daya: 400 V 50 Hz 3 Fasa Tipe: Kompresor sekrup dengan injeksi oli Kontrol: Panel kendali elektronik Asal: Dibuat di Belgia Tidak ada jaminan atas kebenaran, kelengkapan, atau keterkinian informasi yang diberikan.

Tahun pembuatan: 1997, Kondisi: baik (bekas),

Kondisi: baru, Delivery pressure: 11 bar Intake capacity: 480 cm³ Volume flow: 360 Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW V / kW Speed: 892 rpm Machine weight: approx. 200 kg Lhedpfsvkizgjx Ag Rjd Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 135 h, kapasitas angkut: 230 kg, berat kosong: 7.600 kg, tinggi konstruksi: 2.530 mm, jenis bahan bakar: diesel, panjang total: 7.770 mm, jenis penggerak: Diesel, jangkauan lengan: 10.600 mm, lebar konstruksi: 2.300 mm, tinggi kerja: 17.650 mm, Articulating Boom Lift Transmission: Hydrostatic Condition: As new Technical Condition: Very good Front Tyre Type: Solid rubber Ledpfeupauqsx Ag Rohd Front Tyre Size: 18 Front Tyre Condition: 80 - 100% Rear Tyre Type: Solid rubber Rear Tyre Size: 18 Rear Tyre Condition: 80 - 100% Description: The 180 ATJ articulating boom lift has a lifting capacity of 230 kg at a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped and obstructed terrain. Thanks to its off-road capability, it is the ideal work partner on construction sites with rough ground. The newly introduced, progressive hydraulic speed regulation helps to reduce noise levels and fuel consumption. As with other diesel-powered platforms, four-wheel drive and three steering modes allow for easy navigation and positioning of the machine on congested or tight job sites. The design of the control panel ensures a clear operator environment for fast handling and immediate productivity. 230 V generator and sockets in platform basket, SMS Safe Man System.

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Lhjdpfexdc Uvjx Ag Rod

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Ljdpfju Rptysx Ag Rohd Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.950 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 916 kg, panjang total: 1.200 mm, lebar total: 1.100 mm, tinggi total: 2.000 mm, produsen motor: Atlas Copco, daya: 55 kW (74,78 hp), jenis bahan bakar: listrik, laju aliran volumetrik: 650 m³/jam, tekanan kerja: 13 batang, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Atlas Copco Kompresor Sekrup Model: FA55VSD+ Tahun pembuatan: 2020 Jam kerja: 8.950 jam Daya nominal motor: 55 kW Tekanan: 4,0 hingga 13,0 bar Lhsdpfox Dfmzex Ag Rsd Kapasitas aliran: 182,5 l/dtk atau 10,9 m³/menit Tegangan/Frekuensi: 400 V / 50 Hz Dimensi (Panjang/Lebar/Tinggi): sekitar 1.200 / 1.100 / 2.000 mm Berat: 900 kg Kompresor berfungsi dengan baik dan telah diperiksa serta dirawat secara rutin. Saat ini masih terpasang listrik dan dapat dipantau selama operasi. Pengering udara terkait serta tangki udara tekan dapat dibeli secara opsional (lihat penawaran lainnya).

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 9207102, Offer 12001 Technical Specifications: - Material thickness: 1.25 mm - Max. throat depth: 180 mm - Roll center distance: 63 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.25 mm - Working speed approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW Lhjdoi Hpmtspfx Ag Rsd - Required space (approx.): W 550 x H 1250 x D 1000 mm - Weight (approx.): 120 kg - Includes: Electronic foot switch

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 950 kg, warna: kuning, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 80 l, produsen motor: Deutz D2011L03, panjang total: 3.740 mm, lebar total: 1.410 mm, tinggi total: 1.360 mm, daya: 36 kW (48,95 hp), laju aliran volumetrik: 318 m³/jam, tekanan kerja: 7 batang, tekanan (min.): 4 batang, tekanan (maks.): 8,5 batang, tingkat kebisingan: 98 dB, Tahun pembuatan: 2016, jam operasional: 1.190 h, inspeksi berikutnya (TÜV): 04/2025, nomor mesin/kendaraan: APP418299, Perlengkapan: Pemeriksaan keselamatan UVV, - Hood and body made of impact-resistant, robust polyethylene - Overrun and parking brake with automatic reverse function - Tool oiler - Choice of truck DIN towing eye or car ball-type coupling, height-adjustable drawbar Lhodpetwz Ezofx Ag Rsd Next pressure vessel inspection according to Directive 87/404/EEC due in May 2026 If you have any questions, please feel free to contact us directly.

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Ljdot Hw S Ijpfx Ag Rjhd Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice.