Pabrik palu / pembagi benturan

Aubema 2508

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang rotor: 2.200 mm, kecepatan rotasi (min.): 58 rpm, berat keseluruhan: 30.000 kg, daya: 220 kW (299,12 hp), tegangan masuk: 400 V, 1 Fgodpfew Tk E Aex Airec

Kondisi: baik (bekas), Tahun pembuatan: 1999, translation-01 Fsdpjtlzdqefx Airegc

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Fgodpfx Aou Nlkxjirsc

Kondisi: bekas, Eldan granuliatorius HG129 Fgsdpfx Ast Uyvreirjc

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-029, lebar total: 800 mm, panjang total: 4.700 mm, tinggi total: 1.900 mm, jenis arus masuk: tiga fasa, konsumsi energi: 2 kWh, Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Capable of separating all metals from approx. 1 mm grain size. Suitable for material with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, available for inspection and testing. Camera option available on request! If the machine is too small, we also build larger versions. This is our demonstration unit. Maximum throughput depends on material and purpose. Price negotiable! Fedpfxjqabm Es Airegc

Tahun pembuatan: 1986, Kondisi: belum diuji (bekas), 6-kops roterende vacuüm-afsluitmachine, gereviseerd in 2017. Wordt verkocht in huidige staat of getest en afgesteld volgens klantwens. Fgsdpfx Aief Rk Agsrjc

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: Fgsdpfjvf E Avsx Airec The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Dijual! Mesin laminasi silang veneer Fisher+Rueckle FZR-24, tahun 2013! Panjang strip veneer: 400-1100 mm jalur ganda / 350-2100 mm jalur tunggal Lebar strip veneer: 50-500 mm Tebal strip veneer: 0,3-1,5 mm Kapasitas nominal maksimum / siklus mesin: 30 siklus/menit Kecepatan produksi rata-rata: 17-20 siklus/menit Panjang efektif zona pemanas: 2478 mm Daya terpasang: 22 kW Tekanan udara tekan: 6 bar Fodpfx Aieumrf Ajrsgc Jenis lem: Berbasis PVA atau UREA

Kondisi: sangat baik (bekas), ZEISS Model: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage, as well as drives for the external storage of data and images. Fgodpfxjfcwwnj Airec This enables quick and easy acquisition of insights regarding the composition and morphology of specimen surfaces down to the sub-micron range. With a magnification range from 5x to 300,000x, the examination of both macrostructures and microstructures is possible. By using special accessories, the range of applications can be significantly expanded, enabling, for example, analytical investigations on micro-areas of the surface. Operation of the device can be performed using conventional control elements or, optionally, via keyboard and mouse. Electron optics and vacuum control are operated conventionally. Image memory functions are controlled via keyboard or mouse (optional). Centrally located on the control panel is a separate information display for menu visualization. This user manual is intended as a guide to help users achieve optimal results with the device. The explanations are kept as simple as possible to provide even less experienced users with the necessary knowledge. Magnification range: 20x to 300,000x at 7 mm working distance Steps in 1-2-3-5-10 sequence Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm – guaranteed with tungsten cathode at 30 kV, 6 mm working distance, specimen not tilted 25 nm – guaranteed with tungsten cathode at 1 kV, 6 mm working distance, specimen not tilted 3.5 nm – guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, specimen not tilted Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications!) Please inquire about transport options prior to purchase. For further questions, feel free to contact us by phone.

Tahun pembuatan: 2010, Kondisi: baik (bekas), 2 SICON shredders Year: 2010 Missing electrical cabinet Price: €15,000 each 4 densimetric tables: €8,000 each Fgjdpfxsiz Tm Ij Airsc