Moulder spindel ganda untuk komponen kayu

AUER BL-100

Kondisi: bekas, Tahun pembuatan: 2000, unimat23e_spec Csdpfx Aaswztw Se Tspw

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, The BP 800 is an automatic bundle packer. It can package products with a width of up to 760 mm and a height of up to 380 mm. - Semi-automatic bundle packer - Pneumatic ram - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80µm - Low energy consumption - Conforms to EU standards Technical Data Power supply: 380 V Output per minute: 10 packs Usable sealing bar: 760 mm Maximum product height: 380 mm Cpjdpswth Dqjfx Aa Tsw Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download datasheet

Kondisi: bekas, Maximum cutting width: 310 mm Codpfx Aev Uq Tlja Tspw Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)

Kondisi: baik (bekas), de-Weinig Hydromat H23 50 mm Spindeln, 6.000 U/min Unterspindel 15 kW, hobelfertig Rechte Spindel 11 kW, hobelfertig Linke Spindel 11 kW, hobelfertig Rechte Spindel 11 kW, hobelfertig Linke Spindel 11 kW, hobelfertig Obere Spindel 15 kW, hobelfertig Untere Spindel 11 kW, hobelfertig (Geradhobel) + Lagerbock Obere Spindel 11 kW, hobelfertig (Geradhobel) + Lagerbock Untere Spindel 15 kW, hobelfertig Zusätzliche Gerade- oder Profil-Hobelaggregate können nach Bedarf nachgerüstet werden!!! Vorschubmotor 15 kW Automatisches Schmiersystem Lieferung mit Ein- und Auslauf-Förderern optional möglich. Werkzeugausstattung kann bei Bedarf angeboten werden. Cpedpfowmw Nvox Aa Tow

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), de2hu-it-lt-lv-nb-nl-pl-001 Cedeu Damdepfx Aa Tjpw

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 108111, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 240 mm, tinggi penyerutan: 160 mm, tinggi kerja: 180 mm, Four-side planer after service inspection, machine weight 3,900 kg Cpodpfx Aaovrq U Dj Tjw

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm Cpodpfxewvqkle Aa Tsw • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 2.400 kg, Mesin gergaji compact dengan pemasukan sentralisasi mekanis, motor listrik 2x75 kW dan 2x90 kW, mesin dapat dilengkapi dengan blok edging dan panel kontrol listrik dengan inverter frekuensi DETAIL TEKNIS Diameter atas: 80-230 mm Diameter batang maksimum: 350 mm Panjang batang minimum: 2,4 m Tinggi balok pada Chipper Canter: 60-232 mm Lebar balok pada Chipper Canter: 70-210 mm Kecepatan lini: 70-150 m/menit Cjdpfxexfrmwo Aa Topw Panjang serpihan: 20-30 mm

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 3.440 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 91, We are offering this very lightly used Krüsi Krüsimatik G1 with only 3,440 operating hours, year of manufacture 2011. The machine is available immediately. Manufacturer: Krüsi Maschinenbau AG OFFER - KRÜSIMATIC G1 5-Axis System by Krüsi Wood passage: 420x200 mm 5-axis saw unit 5-axis milling unit, horizontal 5-axis milling unit, vertical Drilling unit Chain mortising unit Push-off roller table 8 m Push-off roller table 8 m Control unit with cooling device Compressed air tank Including complete tooling Operating manual 1 used timber processing system, KRÜSI type Kruesimatic G1 Year of manufacture: 2011 Compatible with all common joinery software such as Catwork, SEMA, Dietrichs, S & S, Nußreiner, etc. 5-axis system with dovetail cutter Material feed/processing from right to left 6-side processing without having to flip the timber! Weight: 5.5 t BTL controlled for interface with the office or with manual input directly at the machine. To increase cutting performance, the feed is frequency-controlled and can be optimized for various cross cuts. Platform height without floor pit: 920 mm Offcuts fall into a mobile box, including chips The system only needs to be plugged in to the electrical cabinet Maximum timber cross-section: 200 mm x 420 mm System set up and ready for demonstration AVAILABLE IMMEDIATELY The entire system fits on a MEGA trailer Location: 8842 Unteriberg, ready for demonstration. Codpfxjyfwbnj Aa Topw Dismantling / transport / installation by Auf der Maur GmbH Machinery transport Sale from site Waagtalstrasse 42, 8842 Unteriberg, as viewed, without warranty or guarantee. Full payment required immediately upon receipt of invoice, without deductions. The system can only be collected after full payment is received. Sold as seen, with no claim to statutory warranty, guarantee, or aftersales support. “All warranty, to the extent permitted by law, is excluded. In particular, rescission and reduction are excluded.”

Kondisi: baru, Tahun pembuatan: 2025, masa garansi: 12 bulan, ketinggian potong (maks.): 120 mm, lebar pemotongan (maks.): 200 mm, daya: 16 kW (21,75 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Machine for processing components used in modern log house construction, offering the perfect price-performance ratio for beginners, small-scale production, or as a supplement for special parts. Components are manually loaded and positioned – After activating the processing unit using the two-hand control buttons, the milling operation runs automatically. Optional roller tables and positioning stops are available for precise component positioning. Cpodpownt Htofx Aa Tow