Mesin penajam palu

AVS-100

CONTROL SYSTEM
.. SIEMENS S7

RAW MATERIAL PIPE
.. Max. outside diameter: 140 mm
.. Max. length: 8000 mm

MACHINE SPECIFICATIONS SWAGING, HAMMERING
.. Force: 1000 kN
.. Max. stroke rate: 560 /min

Pipe End Forging Hammer Machine AHM 100 with Feed Carriage 'S' – Maximum Performance for Professional Pipe Processing

The Pipe End Forging Hammer Machine AHM 100 is the ideal solution for industrial operations requiring high-quality cold-end forming and reduction of pipes. With its robust design, high forming force, and fully automatable operation, it enables economical production of drawing and folding mandrels, as well as precise cold forming of round and square tubes. The result: sturdy mandrels, optimal material flow at the start of drawing, and efficient removal of pickling and bonding solutions.

Processable Materials & Specifications

The AHM 100 is designed for heavy-duty operation and demanding materials:

Pipe diameter: 20–140 mm

Wall thickness: 1–6.5 mm

Pipe length: 3,000–8,000 mm

Material: Steel pipes up to 800 N/mm² tensile strength

Curvature: 2.5 D across the entire pipe length

Working height: approx. 1,050 mm

This makes the machine ideal for various production environments – from steel fabrication and tube profiling technology to drawing plants.

Technical Highlights of the AHM 100 Pipe End Forging Hammer Machine

Csdpfxjx Dh Une Aarjaa
-Maximum forming force: 1,000 kN – high performance even with thick-walled tubes
-Stroke rate: 560 min⁻¹ for efficient and rapid processing
-45 kW main motor output at 1,450 min⁻¹
-Total input power: approx. 60 kW
-Four synchronously operating forming tools for maximum deformation
-Quick-release tool holder → dramatically reduced setup times
-Sinusoidal swaging motion via eccentric drive → optimal forming quality and minimal tool wear
-Automatic forced lubrication → virtually maintenance-free
-Optional: electronic overload protection with force display

Productivity at a New Level – with Feed Carriage 'S'

For highest feeding forces and for greased or bonded pipes, the addition of the 'S' carriage feed system, specifically tailored to the AHM 100, is recommended.

Continuously variable feed speed: 0–100 mm/s

Carriage stroke: max. 600 mm

Stepless rotary speed of clamping head: 0–50 min⁻¹

Insertion force: 2.5 kN

Hydraulic unit output: 11 kW


The clamping jaws – available in either plastic or steel – are suitable for all areas of operation without the need for changeover. Rotation, clamping force, and feed are independently adjustable – for full process control.

Scope of delivery:
Separation unit
AVS-100
Existing documentation

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.