Mesin pelapis gulungan

BÜRKLE SAS1300

Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: 9830-01, lebar kerja: 1.300 mm, diameter rol: 250 mm, Perlengkapan: Penandaan CE, No reserve price – guaranteed sale to the highest bidder! The machine must be collected between 10.06.26 and 30.06.26! The coating plant consists of several individual machines as follows: Pos. 1 – MANFRED LAMPRECHT MASCHINENBAU BM 1300 - V (Brushing Machine) Max. working width: 1,300 mm Total power: 4.2 kW Pos. 2 – BURKLE SAS 1300 (Coating Machine) Max. working width: 1,300 mm Application roller diameter: 250 mm Number of coating units: 3 Coating unit 1 Djdjy Uwnbepfx Aktokn Type: Dosing unit Material: Steel Roller diameter: 180 mm Coating unit 2 Type: Application unit Material: Rubber Roller diameter: 250 mm Coating unit 3 Type: Filler unit Material: Steel Roller diameter: 250 mm Pos. 3 – BURKLE UV SYSTEM Max. working width: 1,300 mm Drying system: Ultraviolet lamps – UV System type: Motorised feed rollers Pos. 4 – BURKLE SLC 1300 (Coating Machine) Max. working width: 1,300 mm Application roller diameter: 250 mm Number of coating units: 2 Coating unit 1 Type: Dosing unit Material: Steel Roller diameter: 180 mm Coating unit 2 Type: Application unit Material: Rubber Roller diameter: 250 mm Pos. 5 – HACKEMACK KTR 3370 (Drying Machine) Max. working width: 1,300 mm Drying system: Ultraviolet lamps – UV Number of lamps: 2 System type: Conveyor belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8542

Tahun pembuatan: 2025, Kondisi: baru, de Dodpfx Aksgd Uifetskn

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), translation_001 Dkjdpsy Tx N Dsfx Aktjn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-029, lebar total: 800 mm, panjang total: 4.700 mm, tinggi total: 1.900 mm, jenis arus masuk: tiga fasa, konsumsi energi: 2 kWh, Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Capable of separating all metals from approx. 1 mm grain size. Suitable for material with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, available for inspection and testing. Camera option available on request! If the machine is too small, we also build larger versions. This is our demonstration unit. Maximum throughput depends on material and purpose. Price negotiable! Dedpfx Akjqabm Eotjkn

Kondisi: baik (bekas), Through-feed line for door leaf processing, high-performance machine—processing of a single leaf (lock box, handle, and hinges) in approximately 30 seconds. The machine consists of two sections, each with a left and right station performing specific operations. The first section: the left station mills for the lock faceplate and drills for the handle and key; simultaneously, the right station drills for the hinges. The second section: the left station creates and deepens the lock pocket; at the same time, the right station screws in the hinges. Dkodpfxjuq Scpo Aktsn

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Dijual! Mesin laminasi silang veneer Fisher+Rueckle FZR-24, tahun 2013! Panjang strip veneer: 400-1100 mm jalur ganda / 350-2100 mm jalur tunggal Lebar strip veneer: 50-500 mm Tebal strip veneer: 0,3-1,5 mm Kapasitas nominal maksimum / siklus mesin: 30 siklus/menit Kecepatan produksi rata-rata: 17-20 siklus/menit Dodpfx Aoumrf Aektjkn Panjang efektif zona pemanas: 2478 mm Daya terpasang: 22 kW Tekanan udara tekan: 6 bar Jenis lem: Berbasis PVA atau UREA

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Max. working width: 1000 mm, feed rate: 5-20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Dksdpfx Asi E Trpskten

Kondisi: hampir baru (bekas), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Drive: 22 kW / 1,470 rpm Dedog Snt Sepfx Aktskn

Tahun pembuatan: 2026, Kondisi: baru, VKM - Package Singulation for Milled Timber Djdpsg Rxhgjfx Aktjkn With the singulation of milled timbers, whether loosely stacked or bundled, already milled timber can be processed further in a cost-effective manner. In a two-stage process, the timber is singulated for subsequent processing. It is also possible to automatically feed the singulated timber into a continuous process. The feeder is mechanically designed to reliably process even warped timber. Furthermore, it can be adjusted to the diameter of the timber to ensure that only a single piece is transported at a time, preventing blockages or downtime further along the processing line.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Gergaji multi-blade Raimann ProfiRip KR 310 M (2 flensa bergerak) dengan paket gergaji potong HOLTEC ES 121SHKA dan sistem ekstraksi Hurrican Model: Raimann ProfiRip KR 310 M Tahun pembuatan: 2004 (diperbaharui 2022) Gergaji multi-blade dengan 2 mata gergaji yang dapat diatur Detail teknis: Gauge track: 340 mm Lebar lintasan maksimum: maksimal 950 mm (biasa 800 mm) Tinggi pemotongan dengan/tanpa pelat penekan: 115 mm / 130 mm Panjang benda kerja: minimal 450 mm Diameter maksimum mata gergaji: 380 mm Dsdpeymgypofx Aktskn Diameter minimum mata gergaji: 250 mm Lubang mata gergaji: 80 mm Diameter poros gergaji: 65 mm Kecepatan poros gergaji: 3900 rpm Motor: 30 kW Lampu pemandu laser: 3 buah Tekanan operasi: 6 bar Kecepatan pengumpanan variabel: 8-48 m/menit Motor pengumpan: 1,5 kW Tegangan: 400V / 50Hz