Mesin amplas pita lebar Bütfering FBS 1300

Bütfering FBS 1300

Kondisi: sangat baik (bekas), Gold-anodised plates Working dimensions: 2.5 × 1.1 m Electric heating Fully operational, tested You can call or write to us. We can speak and write in German and Russian. You may also send messages in English. 31.3.5 Godpfxsu I N D Hj Ah Reip

Tahun pembuatan: 1994, Kondisi: baik (bekas), Rivo bandsaw sharpening machine Type GA 250 Gjdpopl D Hxsfx Ah Rjip

Kondisi: bekas, Tahun pembuatan: 2018, panjang total: 5.000 mm, lebar total: 1.500 mm, tinggi total: 1.650 mm, Weight: 1,450 kg Price: On request - Year of manufacture: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: 1408 - Max. cutting length [mm]: 3,800 - Max. cutting height [mm]: 95 - Max. saw blade diameter [mm]: 350 - Saw blade bore diameter [mm]: 30 - Dust extraction port diameter [mm]: 125 - Controlled axes: Tilting, parallel fence - Electrically adjustable axes: Parallel fence, tilting - Spindle speed: - └ Max. spindle speed [rpm]: 4,000 - Tiltable saw unit: - └ Min. tilting angle [°]: 0 - └ Max. tilting angle [°]: 45 - Voltage [V]: 400 - Power consumption [A]: 19 - Transport dimensions: 5,000 mm x 1,500 mm x 1,650 mm (l x w x h) - Transport weight [kg]: 1,450 kg - Shipping units [pcs.]: 2 Financial Information VAT: The stated price is exclusive of VAT VAT/Differential Taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Gjdsx Igayspfx Ah Rjip Yorick Diebels

Kondisi: baru, Tahun pembuatan: 2026, Technical Data: • Extraction capacity ~ 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction connection 250/200mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1,982 x 2,144 mm • Weight 300 kg • Filter category G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Godpfx Asd H Rf Toh Reip Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Chassis • Filter cleaning via vibratory system with control panel + €850 for models with fire extinguisher (Safe System)

Kondisi: bekas, Tahun pembuatan: 1989, Mesin bekas Tahun pembuatan: 1989 Kondisi: Telah diuji fungsinya Perlengkapan dan data teknis: Ketebalan edge band maksimal: 20 mm Tinggi edge band maksimal: 51 mm Ketebalan material roll maksimal: 3 mm Panjang benda kerja minimal: 140 mm Giodpfxjw I U E Ao Ah Rsp Lebar benda kerja minimal: 60 mm Sistem lem: 1906 Cartridge Unit penekan Unit frais 1920 – frais rata & miring hingga 20 mm Kebutuhan ruang (P x L x T): 3150x1800x1375 mm Berat sekitar: 800 kg Lokasi: Flörsheim Ketersediaan: Segera

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment Gijdpfxjwka S Io Ah Rep - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left/right: 20° - 90° - Milling spindle speed: 4500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 - 8 bar - Air consumption per working cycle: 10 l - Pneumatic profile clamping - Table base frame - Required space approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg Gjdpfx Ahsf E Higj Rjip

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Gjdpsu Agh Sofx Ah Rjip Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 03890317, Machine number: 03890317 // Condition and details, see images Gisdst A A Aqspfx Ah Rep

Kondisi: bekas, PENGHANCUR POROS WEIMA POROS TUNGGAL MODEL WLK15 MOTOR UTAMA 90KW UKURAN PISAU ROTOR 50X50 (PISAU BARU) PANJANG ROTOR 1500MM DIAMETER ROTOR 370MM Gsdpfx Ahjtqd Nds Rsip MESIN 100% BERFUNGSI SIAP DIGUNAKAN