Mesin penggulung fillet

BAD DUBEN PRX 32 E - CNC

Kondisi: baik (bekas), Tahun pembuatan: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control type: CNC control CNC: Siemens 840 D Location: Halberstadt Country of origin: Germany Machine No.: 56XXX X-travel: 630 mm Y-travel: 630 mm Z-travel: 630 mm B-axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool stations: 80 Spindle speed: 16,000 rpm Tool changer: Double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 90 m/min Drive power – spindle motor: 40 kW Internal coolant supply: 50 bar Kodpfx Adjx Hn D Dehodn Number of pallets: 2 Pallet size (LxW): 400 x 500 mm Spindle run time: 1,000 h Operating hours: 3,000 h Max. workpiece swing diameter: 720 mm Media interface: 5-way Additional information: - Equipped with NC rotary table. - State-of-the-art spindle technology - Ideal for precision machining tasks. - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage control Machine can be inspected under power by prior arrangement.

Kondisi: bekas, Tahun pembuatan: 2005, Machine weight approx. 7,800 kg Kjdpsudc S Hsfx Adhedn Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Spindle taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X axis): 180 mm - Column swivel (B axis): -1 to +11 degrees Machine - workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - X-axis feed rate: 12,000 mm/min - Workpiece table (C axis): 0-400 rpm - Cutter (C2 axis): 0-300 rpm - Spindle stroke (A axis): 500-3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load of the machine: 35 kVA - Cable cross-section: 35 mm² - Fusing: 80 A

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: 5279, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 22 rpm, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal (X-axis): 8,000 mm Vertical spindle slide (Y-axis): 1,600 mm Horizontal/Traverse spindle (Z-axis): 1,300 mm WIRELESS PROBE: m&h HSK 100 SIEMENS OPERATOR HANDHELD UNIT B-MPI RIDE-ALONG WORK PLATFORM 3-SIDED SPLASH AND CHIP GUARD WALL CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm, Width: 2,500 mm WASHING GUN IN THE WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l 2-CHANNEL COLLISION MONITORING SYSTEM 2 monitoring channels: – 1. Collision monitoring for orthogonal milling head (Channel 1) – 2. Collision monitoring for fork milling head (Channel 2) PENDULUM OPERATION, 3 WORKING AREAS MULTI-AXIS INTERPOLATION FOR FREE-FORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For fork head, mounted on clamping plate – 10 tool positions – Maximum tool weight: 12.5 kg – Maximum tool length: 200 mm – Maximum tool diameter: 63 mm – Maximum tool diameter with free adjacent slot: 250 mm – Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Maximum tool diameter (full magazine): 125 mm Maximum tool diameter (with free adjacent slots): 250 mm Maximum tool length: 500 mm Maximum tool weight: 25 kg Maximum tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 PIECE FORK HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE – High-frequency milling spindle – Integrated high-frequency spindle – Tool holder HSK – A 63 DIN 69893 – Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle – Speed range up to 20,000 rpm – Motor spindle bearings with lifetime grease lubrication – Sealed with air purge – Torque: 40 Nm at 100% duty cycle, 50 Nm at 40% duty cycle – Automatic tool clamping – Power transmission according to RPM-power diagram GMN HCS 170 – Technical data per datasheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN – Liquid-cooled milling head – Cast construction from GGG 60 – Milling head, automatically swiveling, 180 x 1 degree – The resulting positions can be accessed via CNC control, programmed, and executed – Repeatability at spindle nose: ±0.002 mm, positioning accuracy ±3 seconds – Tool holder: HSK 100-A – The milling spindle is equipped with a hydromechanical quick-change system – Tool clamping force: 45 kN – Internal coolant supply Form A-D – External coolant supply via shower ring – Speed range: 22-4,000 rpm Kjdpsu Sppwsfx Adhedn MAIN DRIVE Through a frequency-controlled liquid-cooled AC motor with 32 kW drive power at 100% duty cycle and 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. – 637 Nm torque at 100% duty cycle, 875 Nm at 40% duty cycle.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.400 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan gandar Y: 30.000 m/menit, laju pemakanan sumbu Z: 30.000 m/menit, kecepatan spindel (maks.): 2.000 rpm, panjang meja: 4.000 mm, lebar meja: 2.000 mm, CNC bed-type milling machine SACHMANN RAMBAUDI - MP-212 HS KOSMO 3 swiveling head SK-50, 0.02 degree, 1195 Nm Spindle extension L = 600 mm with 2000 rpm 3D touch probe MP60 ATC chain with 80 positions Coolant system 1,320 l with 4.8 bar Rotary table 2000 x 1600 x 15 t V-axis (infeed) 1500 mm Table rotation speed 3 rpm Heidenhain RON 700 rotary encoder for table rotation Ram size 500 x 500 mm with 56 kW Chip conveyor X-axis: 6000 mm Y-axis: 2000 mm Z-axis: 1400 mm Table length: 4000 mm Table width: 2000 mm Table load capacity: 25,000 kg Spindle power: 37 kW Spindle speed: 2000 rpm Tool holder: 50 ISO/BT/MK Feed X-axis: 30,000 mm/min Feed Y-axis: 30,000 mm/min Feed Z-axis: 30,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 15,000 mm Ksdex Nh H Dopfx Adhodn Width: 8,000 mm Height: 6,000 mm Weight: 85,000 kg Please note: The information provided on this page has been collected to the best of our knowledge and, where possible, from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Therefore, these do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1964, Fungsionalitas: berfungsi sepenuhnya, Pabrikan: KNAPP-DONAU Model: UZFM Tahun pembuatan: 1964 Kondisi: bekas Ksdpfsytbraox Adhjdn Harga & Lokasi Lokasi: Rostock, Jerman Panjang frais: 1800 mm Lebar frais: 260 mm Modul - maks.: 10 mm Dimensi meja termasuk saluran air: 460 x 2100 mm Luas penjepitan meja: 250 x 1850 mm Lebar cutter - maks.: 100 mm Feeding carriage stepless: 0 - 500 mm/menit Gerakan cepat: 3000 mm/menit Kepala frais dapat diayun + / - 30° Rentang putaran spindle frais, 9 langkah: 29 - 178 rpm Kepala frais dapat dimiringkan kedua sisi untuk roda miring 30° Berat mesin sekitar 3,5 ton Kebutuhan ruang sekitar 4 x 1,85 x 1,85 m Perlengkapan/Aksesoris - 13 ragum - Gear pengganti - Alat penjepit - Dokumentasi

Kondisi: baik (bekas), Tahun pembuatan: 2011, HURCO Pusat Pemesinan CNC VMX 60 t Sumbu X: 1.500 mm Sumbu Y: 660 mm Sumbu Z: 600 mm Ukuran meja: 1.680 x 660 mm Kecepatan spindle: 12.000 rpm Tipe holder alat: SK40 Penukar alat: 24 posisi Dengan kontrol WinMax Termasuk: - Sistem pendingin internal tekanan tinggi (IKZ) - Pendingin spindle - Pistol semprot air pendingin - Kabin pelindung percikan serpihan - Lampu sinyal status operasi mesin - Sistem bilas untuk membantu pembuangan serpihan Kedpfoxvtfpox Adhedn - Lampu mesin - Satu set kaki mesin - Manual mesin dalam bentuk CD - 2 monitor warna (teks + grafis) - Grafis simulasi - Perpustakaan alat dan material - Handwheel elektronik yang dapat dilepas - Milling kantong dengan pulau - Thread cutting sinkron (tap tanpa chuck kompensasi)

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, Montaje de actualización: 2026 Control numérico: NUEVO HEIDENHAIN TNC-i640 Características técnicas Dimensiones Dimensiones de la mesa: 7.650 x 1.000 mm Número de ranuras en T: 7 Dimensiones de las ranuras en T: 22 mm Recorridos de los ejes Recorrido eje X: 5.850 mm Recorrido eje Y: 1.200 mm Recorrido eje Z: 1.500 mm Cabezal de fresado Tipo de cabezal: NUEVO cabezal de indexación automática UDG (cada 2,5º) Sistema de sujeción de herramientas: Hidráulico Cono: ISO 50 (DIN 69871) / Tornillo de tracción: DIN 69872 Gama de velocidades: 20 - 3.000 rpm Kedpfx Adoyf Rqpehedn Potencia del husillo: 29,6 kW Avances Avances rápidos (X, Y, Z): 10.000 mm/min Peso y dimensiones Carga máxima sobre la mesa: 4.000 kg/m² Peso aproximado de la máquina: 31.000 kg Dimensiones aproximadas de la máquina: 11.590 x 5.179 x 3.485 mm Accesorios Protección: nueva valla perimetral de malla metálica Cambiador automático de herramientas: ATC-30 Extractor de virutas: evacuación longitudinal trasera Volante electrónico: Nuevo HR-510 Refrigeración: externa e interna de alta presión a través del husillo Condiciones de venta Garantía: 6 meses en piezas mecánicas Precio y condiciones de venta: bajo consulta Ver todas las características técnicas

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Retrofitted: 2026 Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: Optional Number of T slots: Undefined T slots dimensions: Undefined Axis travels X-axis travel: 10,000 mm Y-axis travel: 1,500 mm Z-axis travel: 2,500 mm Vertical capacity (VC): 0 / 2,500 mm (adjustable) Milling head Ksdpfxoyvwchs Adhodn Head type: Universal Auto-indexing UAD (0.1°) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872 Speed range: 20 - 6,000 rpm Spindle power: 30 kW Feedrates Rapid traverse (X / Y, Z): 30,000 mm/min Weight and dimensions Maximum table load (kg/m²): Optional Approximate machine weight: 70,000 kg Approximate machine dimensions: 17,560 x 12,800 x 4,270 mm Accessories Guarding: pendular with automatic front door and perimetral wire-mesh fence Automatic tool changer: ATC80 with electric motors Chip conveyor: 1 front longitudinal and 1 transverse Electronic handwheel: Siemens 6FX2007-1AE14 Coolant: external, internal high-pressure through spindle Operator’s cabinet: height-adjustable with vertical traverse Other technical features 2 ROTARY TABLES: Model: DEMMELER DRLTS1800 Table surface: 2,400 x 1,800 mm Maximum table load: 40 t Number of T slots: 9 T slot dimensions: 22 mm Rotary axis: Hydrostatic Maximum speed (S1/S6): 3.4 / 5.4 rpm Clamped tangential torque: 175,000 Nm W axis travel: 1,500 mm Maximum feedrate: 20,000 mm/min Number of guideways (W axis): 4 Sale conditions Warranty: 6 months on mechanical parts Price and sale conditions: On request See all technical features

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 8 m/menit, pergeseran cepat sumbu Y: 8 m/menit, pergerakan cepat sumbu Z: 8 m/menit, kecepatan pemakanan sumbu X: 8 m/menit, laju pemakanan gandar Y: 8 m/menit, laju pemakanan sumbu Z: 8 m/menit, rentang pivot: 340 °, panjang meja: 5.000 mm, lebar meja: 1.730 mm, tinggi meja: 300 mm, Technical Data Travel distances • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Kdsdpfx Adeyf Ai Rohsn Control • CNC control: Heidenhain TNC 415 Feed rate • X, Y, and Z axes infinitely variable from: 2 – 8,000 mm/min Universal milling head in orthogonal design • Milling head direction adjustment (motorized): 340 degrees • Milling head tilt range: 180 degrees • Tool holder: SK 50 Year of manufacture: 1992 Inspection: 2025 The machine has been recommissioned and tested by MBM and can be demonstrated under power at D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as control upgrades. Services: - Used machinery - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernisation _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – milling machine used – CNC milling machine used – boring and milling machine used – metal milling machine used – used metal mill – used metal milling machine – used CNC mill – CNC milling machines – CNC milling machine – large workpiece machining – CNC large part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: R2D P1503,