Beli mesin press vulkanisir bekas (3)

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0303, Pressure: 160 t Clear opening: 700 mm Stroke: 400 mm Return force: 16 t Motor power: 15 kW Travel distance: 400 mm Ram plate: 700 x 600 mm Table height above floor: 850 mm Table plate: 700 x 600 mm Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 10 mm/sec Oil cooling (electric): 1.5 kW (max) Oil tank: 300 l Machine weight approx.: 4.2 t Dimensions (L x W x H): 950 x 2440 x 2400 mm Ejector: 30 x 30 mm Ejector stroke: 150 mm Ejector force: 15 t Gjdpfx Adefxyh Rstjtt Ejector speed: 25 mm/sec Number of ejector pins: 1 piece Heating plates (L x W): 550 x 500 mm Light barriers front and rear: 6800 Monitored double doors at rear: 2400 Monitored right side door: 1200 Monitored left side door: 1200 The heating plates measure 550 x 500 mm, electrically heated up to 200°C, and are insulated from the machine frame. The plates have 12 mm T-slots according to DIN 650; design of slots as per customer specifications. Each plate is equipped with 2 temperature sensors for heating accuracy within 500 x 450 mm, accuracy ±3°C. Pressing force can be set in 10 steps using a rotary control. Return speed is 25 mm/sec. The two-hand control unit is attached to the machine frame, rotatable and swivelling. Internal lighting Heating time is freely adjustable. Heating capacity approx. 12 kW. Desired temperature can be set freely. Upper and lower heating plates can be controlled independently. After completion of heating time, an acoustic signal sounds and, if desired, the press opens automatically. Heating plates supplied by German manufacturer ELKOM.

Kondisi: baik (bekas), Tahun pembuatan: 1969, Pneumatic gluing press, max. pressure 10 bar, heated gluing beam, bonding area 550 x 40 mm, infinitely variable temperature control for both upper and lower gluing beam from 0 - 300 °C, stepless adjustment of bonding hold time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm. Gedpfsd Dxqbjx Adtott

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, jam operasional: 2.600 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.200 mm, panjang total: 1.100 mm, tinggi total: 3.400 mm, berat keseluruhan: 8.800 kg, tekanan kerja: 200 batang, tinggi konstruksi: 3.400 mm, gaya penjepit: 5.500 kN, panjang meja: 850 mm, lebar meja: 1.100 mm, tinggi kerja: 800 mm, Hydraulische Presse, hydraulisch und elektrisch generalüberholt, 550 t Schließkraft. Zwei Schließgeschwindigkeiten: Schnellhub und Arbeitsgeschwindigkeit. Einzelzylinder. Gtedpeuy Rczsfx Adtjt Arbeitstisch 850 x 1100 mm mit T-Nuten. Maximaler Öffnungshub: 800 mm. Siemens SPS-Steuerung mit integrierten Temperaturreglern. Einsatzmöglichkeiten: Gummivulkanisation, Pressen von Duroplasten, Metallumformung u.a.