Mesin pengikat

Bang & Co SAP-9X / 18

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Bjdpovgrh Usfx Aa Tjwi Your service team at Mertens & Frowein GmbH

Kondisi: baru, Tahun pembuatan: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical specifications: - Base machine 7402 with Pin-Jet dowel insertion function - Handheld control device - 2D barcode scanner - UPS (Uninterruptible Power Supply) - Quattro HSK package incl. 4-position tool changer - XL drilling head - Double drilling spindle in Y-axis Bwedpowt E Tvjfx Aa Tji - Automatic central lubrication Location: Hochheim Availability: approx. week 32/2022

Kondisi: belum diuji (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, panjang bal: 1.000 mm, lebar bal: 750 mm, tinggi bal: 750.750.750 mm, berat bal: 500 kg, tegangan masuk: 400 V, berat keseluruhan: 7.500 kg, kapasitas tangki oli: 500 l, daya: 30 kW (40,79 hp), berat kosong: 7.500 kg, frekuensi input: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Bedpfx Aoic Rl Doa Tewi Main press force: 50 t Specific pressing force: 5 kg/cm² Feeding channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is currently removed.

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) Bwjdpfx Aeff R Tqja Tsi When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Workpiece dimension range (MIN/MAX): Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Bwedpowb Alljfx Aa Tji Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Lamina System półautomatyczna laminarka SA 1416. W bardzo dobrym stanie technicznym, po generalnym remoncie. Maszyna podłączona pod zasilanie, możliwość testowania. Maksymalny format arkusza: szerokość: 1400 mm długość: 1600 mm Minimalny format arkusza: szerokość: 200 mm długość: 350 mm Arkusz górny: Bedjwz Ev Tspfx Aa Tjwi 130 do 450 g/m² 1 pts = 28,25 g/m² Arkusz dolny: ot 250 g/m² do 10 mm (0,39”) 1 pts = 28,25 g/m² tektura falista od 0,6 do 10 mm (0,016” - 0,39”) Automatyczny podajnik z ciągłym podawaniem arkuszy Maszyna oparta na sztywnej ramie wykonanej z anodowanych profili aluminiowych. Szerokość (z podestami) – 2350 mm, długość – 4600 mm.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Connected load: 15.5 kW, weight: 6.8 t. Bwedpfx Asip D Rzoa Tei

Tahun pembuatan: 1988, Kondisi: baik (bekas), Kompletter Atlas Copco Kompressor inklusive Donaldson Ultra-Filter und Behälter, in gutem Betriebszustand. Bwedpfxohpx U As Aa Toi

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Bsdera Nrxjpfx Aa Towi Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: bekas, nomor mesin/kendaraan: 008365, de Bwedjx Swf Uspfx Aa Toi